• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.70-76
• /
• 2005

A new stratified charge combustion system has been introduced and developed for GDI engines. Before this new GDI system, the stratified mixture was formed by a high pressure swirl injector. But, the special feature of new system is employed of a thin fan-shaped fuel spray formed by a slit type nozzle. Also, this system has been adopted a shell-shaped piston cavity. We made high pressure gasoline injection system and investigated the fan-shaped spray characteristics such as spray tip penetration, spray angle, SMD and velocities of droplets using PDPA(Phase Doppler Particle Analyzer) system and spray visualization system to obtain the concept of the new design and the fundamental data for the next generation GDI system. The experiment was performed at the injection pressures of 5 and 9MPa under the atmospheric condition.

• 터널과지하공간
• /
• 제29권3호
• /
• pp.197-213
• /
• 2019

본 연구에서는 TOUGH-FLAC 연동해석기법을 이용하여 Mont Terri 지하연구시설에서 수행된 단층 내 물 주입시험을 수치적으로 모델링하고, 단층의 재활성과 수리역학적 거동 특성을 살펴보았다. TOUGH2 해석에서는 단층을 Darcy의 법칙과 삼승법칙(Cubic law)을 따르는 연속체 요소로 모델링하였으며, FLAC3D 해석에서는 미끄러짐과 개폐가 허용되는 불연속 인터페이스 요소를 통해 모사하였다. 현장에서 획득한 단층의 균열개방압력(fracture opening pressure), 주입율, 모니터링 압력, 변위 곡선 등을 바탕으로, 단층의 탄성적 변형과 파괴에 의한 수직팽창 특성을 반영할 수 있는 수리간극모델과 수리역학 커플링 관계를 해석모델에 반영하였다. 한편, 현지응력 조건, 단층의 강도 및 변형 특성에 따른 파라미터 해석을 실시하여 각 입력변수가 해석 결과에 미치는 영향을 분석하였으며, 이를 통해 현장시험 결과를 가장 잘 재현할 수 있는 파라미터 조합을 선정하였다. 해석 결과, 균열개방압력에서 단층의 주입율과 모니터링 압력이 크게 증가하는 현상을 합리적으로 재현할 수 있었다. 하지만, 동일한 입력 변수 조건에서 단층의 전단변위와 파괴영역의 범위는 현장시험 결과에 비해 과대평가되는 결과를 보였다. 이는 해석모델에서는 고압의 주입조건에서 단층의 지속적인 전단파괴가 유도되는 반면, 현장에서는 수리간극의 변화가 전단 미끄러짐보다는 인장력에 의한 단층면의 개방(tensile opening)에 크게 의존하는 것으로 추정되기 때문이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.180-183
• /
• 2001

In modem city life, the citizen get insufficient exercise and has high levels of stress. Increased Stress causes such minor things as tiredness, disease and mental fatigue, and increase brain blood pressure too. In this paper trying to design the multi-functional blood pressure monitor with airo-dynamic brain hemokinesis improvement function. So this system have developed for the improvement of flows in the capillary blood vessel of head and limbs. Also This system is able to measure brain blood pressure(BBP) which need diagnosis circulation state of brain blood. So, we extracted correlativity of blood pressure(BP) and BBP through clinical experiment. We confirmed that compare factor of BP with BBP is more useful factors for diagnosis state of brain hemokinesis.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.279-281
• /
• 2012

A short chemical mechanism was developed with the chemical model reduction strategy based on the use of Simulation Error Minimization Connectivity Method(SEM-CM). We examined the accuracy resulting from using this mechanism, as compared with the full mechanism, for premixed flames and auto-ignition of methane-air mixture under high pressures. These comparisons are in good agreement, but it has a little divergence to predict the ignition delay time at high pressure conditions as compared with experiment results.

• 한국해안·해양공학회논문집
• /
• 제22권6호
• /
• pp.374-386
• /
• 2010

최근 슬리트케이슨제와 같은 유공방파제의 파랑제어특성에 대한 이론적 실험적 연구가 활발히 진행되고 있다. 본 연구에서는 규칙파의 작용하에 슬리트케이슨에 의한 반사율의 특성과, 전면유공부 및 유수실의 내부벽면에 작용하는 파압을 2차원 및 3차원수치파동수로에서 각각 추정하고, 그 결과를 검토하였다. 수치실험에서는 주기 7초, 9초, 11초 및 13초와 각각의 주기에 대해 파형경사 0.02, 0.03 및 0.04를 갖는 입사파고의 수치실험안을 설정하였고, 본 연구에서 사용된 2차원 및 3차원의 수치해석은 Navier-Stokes운동방정식에 기초한 이상류(이상류(二相流)) 수치 모델로서, 이는 타해석기법에 비해 복잡한 수면변동에 대한 물리현상을 쉽게 재현할 수 있으며, 수치프로그램의 구성이 보다 간략하게 되는 장점이 있다. 실험결과에 의하면, 반사율에 있어서 주기가 짧은 경우에는 2차원해석이 상당히 큰 값을 나타내지만, 주기가 길어지고 파형경사가 큰 경우에는 2차원해석과 3차원해석의 결과가 거의 동일한 값을 나타낸다. 파압에 있어서 주기가 짧은 경우에는 두 해석법에서 차이는 작지만, 주기가 길어지고 파형경사가 큰 경우에는 차이가 크게 나타나는 경향을 확인할 수 있었다.

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.579-584
• /
• 2022

Objective: To identify the effect of unstable surface kettlebell exercises on muscle activity and balance in middle and high school baseball players. Design: Randomized controlled trial. Methods: The participants were 29 middle and high school baseball players (Unstable surface kettlebell exercises group, USKE: 15; Stable surface kettlebell exercise group, SSKE: 14). The players in the USKE group performed kettlebell exercises for 60 mins on a stable surface thrice a week for 6 weeks, and the return rack was solidified on a stable surface in the same way as the experimental group. Before and after the experiment, the participant's muscle activity of the tibialis anterior and soleus was measured. In addition, the participant's balance was evaluated by measuring the distance moved from the foot's center of pressure (COP). The paired t-test was used to compare groups before and after the experiment. The independent t-test was conducted to assess differences in the degree of change between the two groups before and after the experiment. Results: Compared to the SSKE group, the USKE group showed significant differences in the muscle activity of the tibialis anterior and soleus and the balance with the eyes open and closed. Conclusions: The players in the USKE group showed a significant difference in muscle activity and balance than in those in the SSKE group. Thus, effectively including an unstable surface in the kettlebell exercise program will help improve physical function in athletes and people with musculoskeletal disorders.

• KSTLE International Journal
• /
• 제3권2호
• /
• pp.79-83
• /
• 2002

Sealing an oil-air mixture plays important roles to have an enhanced lubrication for high speed spindle. High speed spindle requires non-contact type of sealing mechanism. Current work emphases on the investigation of the air jet effect on the protective collar type labyrinth seal. To improve the sealing capability of conventional labyrinth seal, air jet was injected against through the leakage flow, It has a combined geometry of a protective collar type and an air jet type. Both of a numerical analysis by CFD (Computational Fluid Dynamics) and experimental measurements are carried out to verify sealing improvement The sealing effects of the leakage clearance and the air jet magnitude are studied in various parameters. The results of pressure drop in the experiment match reasonably to those of the simulation by introducing a flow coefficient Effect of sealing improvement is explained as decreasing of leakage clearance by air jetting. Thus, sealing effect is improved by amount of air jetting even though clearance becomes larger.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.9-21
• /
• 2000

In this study, the characteristics of high-pressure swirl injector have been studied using a commercial CFD code, STAR-CD and experiment to investigate the effect of the length of orifice and swirl port on the spray characteristics. Influences of swirl port angle and initial conditions have also been examined in terms of penetration depth and Sauter`s mean diameter. Computed results of the spray characteristics are compared with experimental results. The results show that the tangential velocity at the nozzle exit decreases, but the axial velocity increases as swirl port angle is increased. Hence, the static flow rate increases, but the initial spray angle decreases with increasing the swirl port angle. It is also shown that the values of the initial SMD used as input data for spray simulation influences the penetration depth and SMD. The spray pattern from the present numerical simulation agrees well with experimental result.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.183-188
• /
• 2002

Co-cured composite materials has its own characteristics, so its thermal expansion is different each other. The selection of tool material for co-cured composite part in high temperature more over $350^{circ}F$ and 50 Psi pressure have to consider part thermal expansion, size, shape, and economic aspect in production line. So it is important choose tooling material in manufacturing composite parts. We called the tool for airplane composite parts as BAJ (Bonding Assembly Jig). Composite parts are cured on the BAJ in autoclave. BAJ have to stable at high temperature over $350^{circ}F$ and 50 Psi pressure, Considering composite parts' dimensional tolerance compare to heat up in autoclave. This paper come from the results of the experiment at the composite parts production line and review other aircraft company's method for tooling This is for the engineer engaged in composite parts manufacturing.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.27-33
• /
• 2011

Supersonic liquid jet discharged from a nozzle has been investigated by using a ballistic range which is composed of high-pressure tube, pump tube, launch tube and liquid storage nozzle. High-speed Schlieren optical method was used to visualize the supersonic liquid jet flow field containing shock wave system, and spray droplet diameter was measured by the laser diffraction method. Experiment was performed with various types of nozzle to investigate the major characteristics of the supersonic liquid jet operating at the range of total pressure of 0.8 from 2.14 GPa. The results obtained shows that shock wave considerably affects the detailed atomization process of the liquid jet and as the nozzle diameter decreases, the shock wave angle and the averaged SMD of spray droplet tends to decrease.