• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.18-23
• /
• 1992

Recently, SSPAs(Solid-State Power Amplifiers) with high linearity and efficiency replace TWTAs (Traveling-Wave-Tube Amplifiers) in satellite transponders. In this paper, a power amplifier with maximum output power is designed and constructed using GaAs FET(MGF-1302) as a test model for the development of SSPAs. For conjugate matching of input and output network, transimission lines and stubs are optimized using microwave CAD program, LINMIC+. Power amplifier is realized on the teflon substrate($\in$S1rT=2.45) with a bandwidth of 1GHz at a center frequency of 8GHz. Maximum stable gain of simulation and simulation and experimental result is obtained 9.23, 7.65 dB, respectively.

• 전력전자학회논문지
• /
• 제5권3호
• /
• pp.300-306
• /
• 2000

지금까지 통상적으로 사용되는 전자레인지의 마그네트론 구동용 전력변환 장치는 성층 철심형 HVT를 이용한 방식을 적용하고 있다. 이 방식은 상용 주파수를 사용하므로, 승압트랜스포머나 배전압용의 커패시터를 대형으로 하기 때문에 고중량, 저효율 및 출력 한계성 등의 단점을 지닌다. 이의 해결책으로 최근 인버터 방식의 전원장치를 전자레인지에 적용하고자 하는 연구가 활발하게 진행되고 있다. 본 논문에서는 전자레인지용 마그네트론 구동을 위한 고압전원 발생장치로써 기존의 스위칭 기술과 공진 기법을 적용하여 고속스위칭을 통한 시스템의 소형, 경량화 및 고 전력밀도를 가지는 전원장치를 개발하여 그 특성을 고찰하였다.

• 한국통신학회논문지
• /
• 제34권4C호
• /
• pp.476-483
• /
• 2009

마이크로파 탐색기를 이용하여 표적을 탐지, 추적하는 경우 하방 표적에 대해서는 지표면에서 반사되는 클러터 신호의 영향을 받는다. HPRF (high pulse repetition frequency) 모드를 사용하는 마이크로파 탐색기에서 부엽클러터 영역에 나타나는 퇴각표적을 탐지하기 위해서는 여러 지형과 상황에 따른 지표면 부엽클러터 전력의 통계적인 특징을 파악하여야 한다. HPRF 모드를 사용하는 탐색기의 항공기 탑재시험에서 지상 클러터의 전력을 측정한 자료를 기반으로, 각 지형과 안테나 시선각 등의 상황에 따라 부엽클러터의 확률분포 특성을 가장 근접하게 표현하는 확률밀도함수를 구하고 그 확률밀도함수의 매개변수를 추정하였다. 확률밀도함수 및 매개변수를 추정한 자료를 이용하여, 퇴각표적을 탐지할 때에 원하는 수준의 표적탐지 오류 확률을 가지는 표적탐지 임계값 설정에 관하여 분석하였다. 본 논문의 지표면 부엽클러터 전력의 확률분포 특성 분석과 표적탐지 임계값 설정에 관한 분석 자료는 표적탐지 방법 개발 및 일정 오경보 처리 등의 다양한 분야에 이용될 수 있다.

• 대한전자공학회논문지
• /
• 제13권5호
• /
• pp.1-8
• /
• 1976

게이트의 길이가 2mm인 GaAb 금속반도체전계치과트랜지스터를 HP8545 자동회로망분석기에 의하여 주파수 1∼2GHz 사이에서 산란계수를 측정하였고, 산란계수의 도움으로 완전한 등가회로를 구현하였다. 본 논문에서는 50Ω의 높은 입출력 Impedance로 정합시키기 위하여 Microstrip을 사용하여 GaAs MESFET증폭기를 개발하였으며 전력이득이 8dB, 정재파비가 1.5보다 적은 결과를 얻었다. Microwave GaAs Metal Semiconductor Field effect Transistors (MESFET) with the gate-length of two micrometers are investigated. The scattering parameters of the transistors have been measured from 1GHz to 2GHz by Hp8545 Automatic network analyzer. From the measured data, an equivalent circuit is established which consists of an ntrinsic and. extrinsic transistor elements. In this paper, GaAb MESFET Amplifier is used in conjunction with conventional microstrip techniques to match into a 50 ohms high input/output impedances system. We found that Power gain is less than 8dB and VSWR is less than 1.5 in L-Band.

• 생약학회지
• /
• 제21권4호
• /
• pp.284-289
• /
• 1990

Crude Aconiti Tubers were irradiated with microwave for 5 or 10 min with or without $NaHCO_3$. Ten min-irradiation reduced the contents of aconitine and mesaconitine to the level of those of commercially available processed Aconiti tuber power which is prepared with the high pressure-high temperature technique. The contents of benzoylaconine of the 10 min-irradiated Aconiti tubers were also comparable to those of commerciallized processed Aconiti tuber powder. However, irradiation with 1% $NaHCO_3$ soln. resulted in the drastic reduction of all the three above alkaloids.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.103-107
• /
• 2006

In this paper, a CMOS complementary bridge rectifier for driving RFID transponder chips is presented. The proposed RFID CMOS complementary bridge rectifier is designed with two NMOSs at the input, which are configured by cross-connected gate structures, and two PMOSs and two NMOSs at the output, which are configured by diode-connected MOS structures. Output characteristics of the proposed rectifier are analyzed with the high frequency small-signal equivalent circuit and verified with SPICE for RFID operating frequencies of 13.56 MHz HF for ISO 18000-3, 915MHz UHF for ISO 18000-6, and 2.45 GHz microwave for ISO 18000-4. Simulation results show well-rectified and high enough DC output voltages for driving the low power microchip in the RFID transponder for the frequency range from HF to microwave. DC output voltages are dropped by only around 0.7 V from the input peak-to-peak voltages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.205-207
• /
• 2001

In response to this inverter microwave oven has been developed to improve high speed cooking time & energy saving performance. The voltage resonating inverter has a defect in switching element that works at 5 or 6times higher than input voltage. Especially, it is very difficult to choose the switching device is very high for the 220 (V) commercial voltage. In this paper, it is proposed the optimum method to realize the turbo 1200(W) output power for microwave oven that is employed the 900(V) IGBT with decreasing operating voltage of the switching component by making the 220(V), 1000(W) inverter through the active clamp voltage resonating inverter.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권11호
• /
• pp.609-615
• /
• 2000

A prototype electrodeless sulfur lamp was developed and investigated the spectroscopic characteristics. The emission spectra of $S_2$ in the microwave-discharged eletrodeless sulfur lamp (ESL) were studied at various input power. The emission spectra of the ESL shift to longer wavelength with increasing of the input power. We have shown that this is due to the self reversal effect in the high pressure gas discharge. We also show that the self reversal effect increases as the rotation of the discharged bulb. The spectral distribution of the ESL shifts about 45 nm toward visible region from UV region due to the rotation of the lamp bulb.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.21-25
• /
• 2017

Background: We are developing L-band and S-band microwave dielectric absorption systems aiming novel dosimetry using DNAs, such as plasmid DNA and genomic DNA, and microwave technology. Materials and Methods: Each system is composed of a cavity resonator, analog signal generator, circulator, power meter, and oscilloscope. Since the cavity resonator is sensitive to temperature change, we have made great efforts to prevent the fluctuation of temperature. We have developed software for controlling and measurement. Results and Discussion: By using this system, we can measure the resonance frequency, f, and ${\Delta}Q$ (Q is a dimensionless parameter that describes how under-damped an oscillator or resonator is, and characterizes a resonator's bandwidth relative to its center frequency) within about 3 minutes with high accuracy. Conclusion: This system will be expected to be applicable to DNAs evaluations and to novel dosimetric system.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.149-153
• /
• 2005

The optical fiber micro-cellular system requires the high linearity that determines the quality and capacity of system. Hence, there is a need for improving the linearity in mobile communication system. In order to compensate dispersion-induced signal distortion, we fabricated the optical feedforward transmitter. The compared 3rd-IMD was enhanced by 38 dB for two-tone case and the Adjacent Channel Power Ratio was enhanced by 20 dB for W-CDMA 1 carrier and by 16 dB for W-CDMA 3 carriers. Also, the induced noise level was reduced.