• 마이크로전자및패키징학회지
• /
• 제21권1호
• /
• pp.19-23
• /
• 2014

LED (Light Emitting Diode) 시장의 발전이 빠르게 이루어지고 있음에 따라 점차 고효율 LED의 필요성이 증가하고 있다. 이에 우리는 Hole Type의 Padless 신 구조 수직형 LED에서, 접촉 전극의 크기와 그 배치가 Chip의 가동 전압에 어떠한 영향을 미치는지 알아보았다. 이를 위하여 LED simulation을 통한 계산과 실제 Chip 제작을 통한 전기적 특성 평가를 하였다. 그 결과, Simulation 을 통하여 n전극의 크기가 커질수록 구동전압이 낮아짐을 확인하였고, N 전극의 형태가 확산됨에 따라서도 구동전압이 낮아짐을 확인하였다. 이러한 추세는 실제 제작한 LED Chip의 측정 결과와 비슷한 경향을 나타내었다.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.253-256
• /
• 2011

LEDs have small size, long lifespan, high reliability, low power consumption and high color efficiency. Using such a characteristics, LED Back Light Unit has been studying actively. This paper proposes LED driver to minimize power consumption due to LED forward voltage($V_F$) difference and temperature rising. Compared to conventional LED driver, the proposed driver have excellent stability, brief structure and linear output voltage of DC-DC boost converter. Proposed LED Driver circuit was designed using 0.35um CMOS technology. And its operation was verified through simulation.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.280-287
• /
• 2011

열전소자를 사용하여 발광다이오드의 방열효과를 조사하였다. 열전소자의 냉각기능인 펠티에 효과(Peltier effect)를 이용하여, 고전력 발광다이오드의 방열과 p-n접합부의 온도를 제어하였다. 정격전류(350 mA)에 대한 고전력(1 W급) 발광다이오드(Light Emitting Diodes: LEDs)의 온도와 p-n접합부 온도는 각각 $64.5^{\circ}C$와 $79.1^{\circ}C$이다. 열전소자의 입력 전력 0.1~0.2 W에 대하여, LED의 온도와 접합부 온도는 각각 $54.2^{\circ}C$와 $68.9^{\circ}C$로 낮아진다. 열전소자에 입력 전력을 0.2 W 이상으로 증가할수록, LED의 온도와 접합부의 온도가 상승한다. 이는 열전소자에 의하여 흡수된 열이 LED로 역류하기 때문이다. 따라서 열전 소자의 냉각기능을 유지하기 위하는 열의 역류를 제어하여야 하며, 열의 역류는 LED의 온도와 방열장치의 온도 차가 클수록 커진다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1507-1509
• /
• 2005

LCD(Liquid Crystal Display) products is needed to have high reliability and are produced without harmful material. Because Substitution for CCFL of Light source used to Conventional backlight unit, research is going about product with LED of light source at present. In this experiment, We made the LED backlight unit with high quality for automotivenavigation. This backlight unit has center luminance of 6500 nit at15W power consumption. We adjusted chromaticity by using ten Blue LED and eight side emitting type White LEDs with high power LED from Lumileds company.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.20.2-20.2
• /
• 2011

III-nitrides have attracted much attention for optoelectronic device applications whose emission wavelengths ranging from green to ultraviolet due to their wide band gap. However, due to the strong polarization properties of conventional c-plane III-nitrides, the built-in polarization-induced electric field limits the performance of optical devices. Therefore, there has been a renewed interest in the growth of nonpolar III-nitride semiconductors for polarization free heterostructure optoelectronic and electronic devices. However, the crystal and the optical quality of nonpolar/semipolar GaN have been poorer than those of conventional c-plane GaN, resulting in the relative poor optical and electrical properties of light emitting diodes (LEDs). In this presentation, I will discuss the growth and characterization of high quality nonpolar a-plane and semipolar (11-22) GaN and InGaN multiple quantum wells (MQWs) grown on r- and m-plane sapphire substrates, respectively, by using metalorganic chemical vapor deposition (MOCVD) without a low temperature GaN buffer layer. Especially, the epitaxial lateral overgrowth (ELO) technique will be also discussed to reduce the dislocation density and enhance the performance of nonpolar and semipolar GaN-based LEDs.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.911-914
• /
• 2011

We optimize electrical and optical properties of thermal and SF6 plasma treated indium tin oxide (ITO)/Al based reflector for high-power ultraviolet (UV) light-emitting diodes (LEDs). After thermal and $SF_6$ plasma treatments of ITO/Al reflector, the specific contact resistance decreased from $1.04{\times}10^{-3}\;{\Omega}{\cdot}cm^2$ to $9.21{\times}10^{-4}\;{\Omega}{\cdot}cm^2$, while the reflectance increased from 58% to 70% at the 365 nm wavelength. The low resistance and high reflectance of ITO/Al reflector are attributed to the reduced Schottky barrier height (SBH) between the ITO and AlGaN by large electronegativity of fluorine species and reduced interface roughness between the ITO and Al, respectively.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.971-977
• /
• 2020

In this paper, We propose a portable electrostatic meter which can measure high voltage static electricity caused by friction to prevent fire or explosion accidents in grinding, crushing, power injection, transport, filling, dust removal, painting, and foreign matter removal processes. The proposed device not only shows static electricity strength in 4 steps with respect to distance and voltage but also gives warning with a buzzer, on process facilities that are likely to generate high voltage static electricity due to friction. The device is implemented by filtering the signal detected by the wireless antenna, amplifying the signal by 6 times, and passing the signal through the integrator circuit. Tests are carried out with an electrostatic discharge simulator. And the results show that 4 LEDs are turned on at the distance of 10cm, 3 LEDs at 12cm, 2 LEDs at 13cm, and 1 LED at 15cm, when a fixed voltage of 500V is given. And also, the tests show that the static electricity can be detected at 5cm on 100V, 10cm on 200V, 15cm on 500V, 20cm on 1000V, and 25cm on 1500V. We expect to reduce accidents caused by static electricity by allowing safety managers on fields where fire or explosion accidents can happen to monitor static electricity.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.220-221
• /
• 2017

초기의 LED(light emitting diode)는 광 출력이 낮아 각종 기계장치의 Table 시용 소자로 많이 사용되었으나, LED 기술의 발달로 고출력 고휘도로 색 Table 현이 가능하게 되었다. 따라서 교통 신호등, 대형 전광판, 자동차Table 시과 같은 디스플레이로 사용하고 있으며, 높은 광량을 요구하는 백열등, 형광등과 같은 실내외 조명에서도 LED가 사용되고 있다. 항로Table 지에 사용되는 등명기 또한 전구에서 LED로 교체되었으며, 초기의 해상용 LED 등명기는 다수의 LED를 사용하여 제작되었다. 하지만 고출력 LED의 개발로 광학 설계만 새롭게 한다면 소수의 LED만을 사용하더라도 해상용 LED 등명기에서 요구하는 광도 및 배광을 만족시킬 수 있다.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.320-327
• /
• 2016

We propose a multi-channel current-balancing single switch light-emitting diode (LED) driver for a 3D TV. Conventional LED drivers require non-isolated DC/DC converters as many as the number of LED channels, whereas the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simple structure with low cost and high efficiency. In particular, because its power switch can be turned off under the zero-current switching condition, the proposed driver has desirable advantages, such as improved electromagnetic interference characteristics and high efficiency. Moreover, it only uses a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. Therefore, the proposed driver exhibits high reliability and cost effectiveness. To confirm the validity of the proposed driver, we perform a theoretical analysis and present design considerations and experimental results obtained from a prototype that is applicable to a 46" LED TV.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.205-207
• /
• 2009

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14W power consumption and start up voltage time is under the15ms in the ambient temperature -20 $^{\circ}C$.