• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.2
• /
• pp.96-101
• /
• 2016

The thermal management of high-power LED components in an assembly structure is crucial for the stable operation and proper luminous function. This study employs numerical tools to determine the optimum thermal design in LEDs with a heat sink consisting of a crevice-type vapor-chamber heat pipe. The effects of the MCPCB are investigated in terms of the substrate thicknesses on which the LEDs are mounted. Further, different placement configurations in a system module are considered. This study found that for a confined area, a power of 40 W/LED is applicable to a high-power package. Furthermore, the thermal conductivity of dielectric layer materials should ideally be greater than 0.9 W/m.K. The temperature conditions of the vapor chamber in a heat pipe greatly affect the thermal performance of the system. At an offset distance of 9.0 mm and a $2^{\circ}C$ increase in the temperature of the heat pipe, the resulting maximum temperature increase is approximately $1.9^{\circ}C$ for each heat dissipation temperature. Finally, at a thermal conductivity of 0.3 W/m.K, it was found that the total thermal resistance changes dramatically. Above 1.2 W/m.K, the resistance change reduces exponentially.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.852-857
• /
• 2010

In this paper, we proposed and demonstrated an indoor visible-light communication system using an array of light-emitting diodes (LEDs). The main idea is based on that the LEDs can be used not only for lighting but also for free-space optical communications. Because LEDs offer advantageous properties such as high brightness, reliability, lower power consumption and long lifetime, the indoor visible-light communication systems are going to provide high quality of service by the high radiation power of the LED lighting. Prototype of simplex channel for audio and the full-duplex channel for text message were developed. Results indicates the viability of creating inexpensive free-space optical communication transceivers that might be embedded in commercial light products to supports indoor wireless networking.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.223-231
• /
• 2015

LEDs have been widely used in lighting displays, automobiles, and airplanes owing to their excellent light output characteristics and long lifespan. Though LEDs are manufactured under the same process, variations in impurity concentrations cause electrical deviation among LEDs. The resulting electrical deviation can not only reduce the life time of the LED but also cause non-uniform luminance of LEDs connected in parallel. LED driving circuit is required to solve these problems. In this paper, we propose a LED driving system using Y-type current balancing transformer to maximize the efficiency of the system by removing output stage Schottky diodes. Experimental results are presented to verify the performance of proposed LED driving system that is applied to 80 W LED modules.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1343-1348
• /
• 2008

LEDs which have many merits are widely used in the field of light devices, and have rapidly replaced old light devices such as incandescent or fluorescent lamps. Long life, on the order of 50,000 to 100,000 hours, is one of the key features of light emitting diodes(LEDs) that has attracted the lighting community to this technology. High Power white LEDs have yet to demonstrate this capability. This paper planed accelerated life test that has two factor(temperature, current) and two levels. Finally, using ALTA programs, we estimated the common shape parameter of Weibull distribution, life-stress relationship, B10 life and accelerating factors.

• Korean Journal of Human Ecology
• /
• v.19 no.6
• /
• pp.1053-1062
• /
• 2010

To assist the further development of hight-visibility clothing this study compared the visibility and subjective wear sensation of commercial protective vests with retro-reflecting materials or LEDs. Nine subjects compared high-visibility vests to evaluate how easy they were to see when exposed to the headlight of a car at night, and the subjects assessed the wear sensation of the vests also. The intensity and visibility of five different colored LEDs assembled on the five substrates separately were also evaluated to select the suitable LED color for night protective clothing. The intensity of illumination was measured by an illuminometer, and the visibility was evaluated by 11 participants both in a dark room and in front of a car outdoors at night. Results showed, the most effective LEDs were high intensity LEDs which shift blinking red and white were most effective. However, excessively high intensity of illumination could decrease the working efficiency. In subjective wear evaluation, the most favorable vest had a front opening, were adjustable at the sides, and had an electric power switch on the front of the vest.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.996-1000
• /
• 2010

In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.594-599
• /
• 2014

The heat dissipation conditions of high-power 5 watt LEDs-based searchlight modules were optimized with varying LED bar'shape, materials, and ambient temperature. The LED junction temperature was estimated by using Computational Fluid Dynamics simulation. The optimal heat dissipation conditions were found as follows; LED bar' shape: L=80 mm, W=4 mm, t=10 mm, copper material, LED junction temperature of $116.6^{\circ}C$, ambient temperature of $50^{\circ}C$, total mass of 184 g, and shadowing area of $320mm^2$. The difference between the junction temperatures of our fabricated and simulated LEDs-based searchlight modules is about $3^{\circ}C$, which confirms the validity of our thermal simulation results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.1
• /
• pp.44-49
• /
• 2021

Recently, infrared (IR) and near-infrared (NIR) light-emitting diodes (LEDs) were widely used for home medical applications owing to its low output power and wide exposed area for curing. For deep penetration of the light under the skin, multiple LEDs with wavelengths of 700~10,000 nm were located on a flexible printed circuit board. When multiple wavelengths of LEDs were soldered on a circuit board, the lifetime of LED module highly depends on LEDs with a short lifetime. The mean time to failure (MTTF) was able to calculate with the experimental results under high temperature and the Arrhenius model. The results of this study could help companies to approve the warranty of LED modules and its product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.108-108
• /
• 2012

High-performance GaN-based light emitting diodes (LEDs) with high efficiency and excellent reliability have been of technological importance forapplications in full color display, automotive lighting, and solid state lighting. To realize high-performance and excellent-reliability LEDs, various technologies such as surface texturing, transparent conducting oxide, surface Plasmon, highly p-conduction layer, current blocking layer, photon-enhanced layer, and nanostructures have been extensively investigated. Among them, advanced core technologies based on how to suppress surface leakage and current crowding, how to enhance current injection efficiency and output power, and how to resist electrostatic damage will be displayed and discussed using our reported and preliminary results. New approaches like integrated LEDs will be also introduced and discussed.

• Journal of Applied Reliability
• /
• v.10 no.2
• /
• pp.137-148
• /
• 2010

This study deals with the accelerated life test of high power phosphor converted white Light Emitting Diodes (High power LEDs). Samples were aged at $110^{\circ}C$/85% RH and $130^{\circ}C$/85% RH up to 900 hours under non-biased condition. The stress induced a luminous flux decay on LEDs in all the conditions. Aged devices exhibited modification of package silicon color from white to yellowish brown. The instability of the package contributes to the overall degradation of optical lens and structural degradations such as generating bubbles. The degradation mechanisms of lumen decay and reduction of spectrum intensity were ascribed to hygro-mechanical stress which results in package instabilities.