• Educational Technology International
• /
• 제19권1호
• /
• pp.123-151
• /
• 2018

This study aims to examine the effects of self-directed learning readiness (SDLR) on academic performance and the perceived usefulness for each elements of flipped learning. Based on their SDLR scores, 69 students were assigned to a high SDLR group and a low SDLR group. Academic performance was measured by the completion rate of a pre-class online learning and the final exam score, and perceived usefulness for each element of flipped learning was measured by a survey designed by the researcher. For academic performance, the high SDLR group showed a significantly higher completion rate than the low SDLR group, but no significant difference was observed in their final exam scores. Students in the high SDLR group perceived in-class student-centered activities as more useful than those in the low SDLR group. Additional qualitative analyses indicated that students needed more support from instructors and well-prepared peers. Finally, this study suggested that more examination on the various learning characteristics that may influence the effectiveness of flipped learning should be done.

• 생명과학회지
• /
• 제17권5호
• /
• pp.714-718
• /
• 2007

유전자의 구조 예측 및 발현 기작에 대한 연구는 매우 중요한 사안으로 대두되고 있다. 특히 유전자 발현 제어에 중요한 역할을 하는 프로모터 영역을 예측하는 것은 전체 생명체 네트워크 규명을 위한 단초를 제공하기 때문에 많은 연구가 이루어지고 있다. 본 논문에서는 이러한 진핵생물의 유전자 프로모터 예측을 위한 Support Vector Machine(SVM) 활용방안에 대한 연구내용을 다루고 있다. 특성 벡터 값 생성을 위한 인코딩 방법 및 학습 데이터들의 구성에 대한 다양한 실험을 통해 SVM활용 방안에 대한 올바른 방향을 제시하고 있다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.378-382
• /
• 2001

The purpose of this study was to develop an expert system supporting the diagnosis of diffuse interstitial lung disease by high resolution computed tomography. CLIPS(C language integrated production system) with rule-based reasoning was used to develop the system. Development of expert system had three stages knowledge acquisition, knowledge representation, and reasoning. Knowledge was obtained and integrated, from tables and figure legends of a representative textbook in the domain of this expert system, High-Resolution CT of the Lung, by Webb WR, Mueller NL, and Naidich DP. The acquired knowledge was analyzed to form a knowledge base. Overlapping knowledge was eliminated, similar pieces of knowledge were combined and professional terms were defined. The most important knowledge of findings was then selected for each disease. After groupings of combined findings were made, disease groups were analyzed sequentially to determine final diagnoses. The system was based upon the input of 69 diseases, 185 findings, 73 conditions, 387 status, and 62 rules. The system was set up to determine the diagnoses of diseases from the combination of findings using forward reasoning. In an empirical trial, the system was applied to support the diagnosis of 40 cases of diffuse interstitial lung diseases. The performance of two doctors with support of the system was compared to that of another two doctors without support of the system. The two doctors with the support of the system made more accurate diagnoses than the doctors without the support of the system. The system is believed to be useful for the diagnosis of rare diseases and for cases with many possible differential diagnoses. In conclusion, an expert system supporting the high resolution computed tomographic diagnosis of diffuse interstitial lung disease was developed and the system is thought to be useful for medical practice.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.180-185
• /
• 2014

Due to the larger and high-speed vessels recently constructed, output and speed of the engines for propulsion or power generation is increasing. These high-power and high-speed engine of the ship is becoming as a major contributor causing excessive noise and vibration. Other fittings as well as equipment installed on board, it makes equipment failure or other defect by resonance. This causes a lot of M/H(Man Hour) for repairs and the reliability of the company is invading even be negative because the clients give much comment. Thus, it's being studied for any fittings installed on board to maintain the safe operation and to prevent any problem during the performance in any operating conditions. In this study, it was investigated to solve these problems for the supports of the various fittings for easy installation-related support that each type of intensity and shape and manufacturing method using structural analysis program(DNV Nauticus Hull 3D Beam). Namely, it would be applied to the very large crude carriers in consideration of mechanics of materials of the support equipment by providing the fact that dynamics analysis of the structural characteristics of the equipment and the support of the production installation is easy and productivity can be high standards for geometry and thereby to simplify the analysis task to design changes at the same time and to minimize the reinforcement for the supports.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.165-166
• /
• 2023

Free-form Concrete Panel(FCP) is each panel that composes the concrete exterior skin of Free-form building. FCPs contain curved surfaces, and FCPs have different curvature, size, and angles. In order to manufacture FCP, high technology is required, and it is currently difficult to manufacture it according to the design shape. In particular, many errors occur in the side shape of FCP. This is because when the side silicone mold is applied, it is installed without a coupling method between molds and support device. In this study, basic research was conducted to develop a side silicone mold support device to solve the above problems. We classified the required performance and derived the detailed requirements. Also, Based on this, we drew the basic design of the support device. We plans to conduct design improvement, mock-up making, and FCP manufacturing experiments through future research.

• 한국정보처리학회논문지
• /
• 제7권2S호
• /
• pp.721-732
• /
• 2000

Multimedia communication systems require not only high-performance computer hardwares and high-speed networks, but also a buffer management mechanism to process many data efficiently. Two buffer handling methods, Push and Pull, are commonly used. In the Push method, a server controls the flow of dat to a client, while in the Pull method, a client controls the flow of data from a server. Those buffering schemes can be applied to the data transfer between the packet receiving buffer, which receives media data from a network server, and media playout devices, which play the recived media data. However, the buffer management mechanism in client-sides mainly support either one of the Push or the Pull method. Consequently, they have some limitations to support various media playout devices. Futhermore, even though some of them support both methods, it is difficult to use since they can't provide a unified structure. To resolved these problems, in this paper, we propose an efficient and flexible Push/Pull buffer management mechanism at client-side. The proposed buffer management scheme supports both Push and Pull method to provide various media playout devices and to support buffering function to absorb network jitter. The proposed scheme can support the various media playback devices using a single buffer space which in consequence, saves memory space compared to the case that a client keeps tow types of buffers. Moreover, it facilitates the single buffer as a mechanism for the absorbing network jitter effectively and efficiently. The proposed scheme has been implemented in an existing multimedia communication system, so called ISSA (Integrated Streaming Service Architecture), and it shows a good performance result compared to the conventional buffering methods in multimedia communication environments.

• 가정과삶의질연구
• /
• 제32권2호
• /
• pp.27-40
• /
• 2014

The purpose of this study is to examine the motive of participating in the care work, the overall cognition survey for the care work and the infant care practice areas required in the care work for the child care helpers who activate in the care work, and search for methods of specializing infant care and care experiences on the results. Results of study showed that firstly, middle- or the late middle-age women participated in the care worker recognized care work as productive labor to create economic value and that secondly, the child care helpers' recognition degree of self-development and job satisfaction through performance of care work was wholly high level and that there was will of participation in training for self-development but actual participation rate was low due to restrictions by general conditions. Thirdly, the infant care practice areas and their particular contents that the child care helpers recognized in the care work necessary were highly shown in the whole. The requested level of education for safety management, play guidance, humanity guidance for infant and child was high. Point to discuss is that occupation stability and occupation image must be raised through the public job-hunting system for the child care helpers. In addition, a tailor-made education support suitable for the child care helpers' career stage is needed. Education support by the performance of infant care practice area and the educational requirements must be provided to major rearers to ensure that they can function as behavioral and emotional supporters. Finally, a support system for continuous self-management.

• 한국콘텐츠학회논문지
• /
• 제13권9호
• /
• pp.355-368
• /
• 2013

증권회사는 기업경영의 성과가 영업사원의 역량에 따라 크게 좌우되는 인적판매 산업으로 높은 성과를 창출 할 수 있는 능력을 갖춘 우수 영업 인력이 중요하다. 그러나 그동안 증권회사에 근무하는 PB에 대한 개별특성이나 영업행동 그리고 영업성과에 대한 연구는 매우 부족하였다. 본 연구는 PB의 개별특성이 영업행동에 미치는 영향을 실증 분석하고 향후에 영업성과에 미치는 영향을 연구하기 위한 목적으로 실시되었다. 2013년 3월 전국의 국내 증권회사에 근무하는 PB 600명에게 설문지를 배포하여 유의성이 있는 523명의 설문지에 대한 통계적 처리와 분석을 실시 한 결과, PB의 개별 특성인 일에 대한 태도, 성과지향성, 학습지향성, 고객지향성은 영업행동에 긍정적인 영향을 미치는 것으로 나타났으며, 조직의 지원은 양(+)의 조절효과가 있는 것으로 나타났다. 이에 본 연구는 증권회사가 경영성과 제고를 위해서는 PB의 개별특성을 향상시키기 위한 교육훈련과 자기개발프로그램을 활성화해야 하며, 조직지원을 통해서 PB의 개별특성을 향상시킬 수 있는 환경구축이 필요함을 제시한다.

• 한국음향학회지
• /
• 제26권2호
• /
• pp.75-79
• /
• 2007

본 논문은 SVM(Support Vector Machines)을 이용한 음성신호 기반의 효과적인 성별인식 시스템을 제안한다. 분별적 이진(binary) 패턴 분류기인 SVM은 특징 공간에서 비선형 경계를 찾아 분류하는 방법으로 우수한 성능을 보인다고 알려져 있다. 연구에서는 기존의 성별인식에서 널리 쓰이고 있는 MFCC(Mel Frequency Cepstral Coefficients)를 사용하여 SVM과 기존의 GMM(Gaussian Mixture Model) 알고리즘의 성별인식 성능을 비교하였고, 특히, 보다 향상된 SVM의 성별인식을 위해 MFCC와 Pitch를 이용한 결합 특징 벡터를 적용하였다. 실험결과 MFCC 파라미터를 사용했을 때 제안된 SVM이 GMM보다 우수한 성별인식 성능을 보였고, 제안된 결합 특징 벡터를 사용 했을 때 우수한 성능을 보였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.96-99
• /
• 2001

The fatigue life of support bearings is one of the most critical factors for the performance of a control rod driving mechanism. They are operated at high temperature and high pressure and especially lubricated with dramatically low viscosity water. The support bearing is made of standardized 440C stainless steel, and it supports thrust load including the weight of the driving system and external force. Friction and wear characteristics of this material operating under severe lubrication condition is not well known yet, although it is expected to be changed with respect to temperature and boundary pressure. So the friction characteristics are investigated in sliding conditions using the reciprocating tribometer which can simulate the operating conditions. Highly purified water is used as lubricant, and the water is heated up and pressurized. Friction farce on the reciprocating specimens is monitored by the load cells. The results of the experiments are presented in this paper.