• 제목/요약/키워드: High-isolation

검색결과 1,953건 처리시간 0.028초

Si 종형 Hall 소자의 자기감도 개선 (Magnetic Sensitivity Improvement of Silicon Vertical Hall Device)

  • 류지구;김남호;정수태
    • 센서학회지
    • /
    • 제20권4호
    • /
    • pp.260-265
    • /
    • 2011
  • The silicon vertical hall devices are fabricated using a modified bipolar process. It consists of the thin p-layer at Si-$SiO_2$, interface and n-epi layer without $n^+$buried layer to improve the sensitivity and influence of interface effects. Experimental samples are a sensor type I with and type H without p+isolation dam adjacent to the center current electrode. The experimental results for both type show a more high current-related sensitivity than the former's vertical hall devices. The sensitivity of type H and type I are about 150 V/AT and 340 V/AT, respectively. This sensor's behavior can be explained by the similar J-FET model.

MODELING AND PARAMETER IDENTIFICATION FOR A PASSIVE HYDRAULIC MOUNT

  • Zhang, Y.X.;Zhang, J.W.;Shangguan, W.B.;Feng, Q.Sh.
    • International Journal of Automotive Technology
    • /
    • 제8권2호
    • /
    • pp.233-241
    • /
    • 2007
  • A lumped parameter model is proposed for the analysis of dynamic behaviour of a Passive Hydraulic Engine Mount (PHEM), incorporating inertia track and throttle, which is characterized by effective and efficient vibration isolation behaviour in the range of both low and high frequencies. Most of the model parameters, including volume compliance of the throttle chamber, effective piston area, fluid inertia and resistance of inertia track and throttle are identified by an experimental approach. Numerical predictions are obtained through a finite element method for responses of dynamic stiffness of the rubber spring. The experiments are made for the purpose of PHEM validation. Comparison of numerical results with experimental observations has shown that the present PHEM achieves good performance for vibration isolation.

고무마운트를 통한 장비의 고체음 전달에 관한 연구 (Study on the Structure-borne Sound Transmission of a Machine through Rubber Mounts)

  • 김봉기;김재승;김현실;강현주;김상렬
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.655-660
    • /
    • 2000
  • Machines on board a ship are mounted on decks and transmit its structure-borne sound to the deck through resilient mounts. To predict the ship noise generated by the structure-borne sound of the machine, It is necessary to estimate the vibration level of the base structure. In this paper, a simple dynamic model is considered for vibration isolation systems consisting of a source, an isolator, and a base structure. The high frequency mobilities of the simple base structure are reviewed and wave effects in the mount are discussed in relation to isolation performance.

  • PDF

라이즈 스팬 비에 의한 200m 허니컴 래티스 돔의 동적 응답 분석 (Dynamic Response Analysis of 200m Honeycomb Lattice Domes by Rise Span Ratio)

  • 박강근;정미자
    • 한국공간구조학회논문집
    • /
    • 제19권2호
    • /
    • pp.51-61
    • /
    • 2019
  • The objective of this study is to analysis the seismic response of 200m spanned honeycomb lattice domes under horizontal and up-down ground motion of El Centro earthquake. For the analysis of seismic response of the honeycomb lattice domes by rise/span ratio, the time history analysis is used for the estimation of the dynamic response. The low rise lattice dome is less deformed and less stressed than the high rise lattice dome for the earthquake ground motion. The 3-dimensional earthquake response is not significantly different the dynamic response of one directional ground motion. The earthquake response of domes with LRB isolation system is significantly reduced for the asymmetric vertical deformation and the horizontal and vertical accelerations.

Efficient Slice Allocation Method using Cluster Technology in Fifth-Generation Core Networks

  • Park, Sang-Myeon;Mun, Young-Song
    • Journal of information and communication convergence engineering
    • /
    • 제17권3호
    • /
    • pp.185-190
    • /
    • 2019
  • The explosive growth of data traffic and services has created cost challenges for networks. Studies have attempted to effectively apply network slicing in fifth generation networks to provide high speed, low latency, and various compatible services. However, in network slicing using mixed-integer linear programming, the operation count increases exponentially with the number of physical servers and virtual network functions (VNFs) to be allocated. Therefore, we propose an efficient slice allocation method based on cluster technology, comprising the following three steps: i) clustering physical servers; ii) selecting an appropriate cluster to allocate a VNF; iii) selecting an appropriate physical server for VNF allocation. Solver runtimes of the existing and proposed methods are compared, under similar settings, with respect to intra-slice isolation. The results show that solver runtime decreases, by approximately 30% on average, with an increase in the number of physical servers within the cluster in the presence of intra-slice isolation.

Seismic performance of secondary systems housed in isolated and non-isolated building

  • Kumar, Pardeep;Petwal, Sandeep
    • Earthquakes and Structures
    • /
    • 제16권4호
    • /
    • pp.401-413
    • /
    • 2019
  • The concept of base isolation for equipment is well known. Its application in buildings and structures is rather challenging. Introduction of horizontal flexibility at the base helps in proper energy dissipation at the base level thus reducing the seismic demand of the super structure to be considered during design. The present study shows the results of a series of numerical simulation studies on seismic responses of secondary system (SS) housed in non-isolated and base-isolated primary structures (PS) including equipment-structure interactions. For this study the primary structure consists of two similar single bay three-store reinforced cement concrete (RCC) Frame building, one non-isolated with conventional foundation and another base isolated with Lead plug bearings (LPB) constructed at IIT Guwahati, while the secondary system is modeled as a steel frame. Time period of the base isolated building is higher than the fixed building. Due to the presence of isolator, Acceleration response is significantly reduced in both (X and Y) direction of Building. It have been found that when compared to fixed base building, the base isolated building gives better performance in high seismic prone areas.

와이브로 기지국 시스템을 위한 고전력 PIN 다이오드 스위치 모듈과 고속 스위치 구동회로의 구현 (Implementation of High-Power PM Diode Switch Modules and High-Speed Switch Driver Circuits for Wibro Base Stations)

  • 김동욱;김경학;김보배
    • 한국전자파학회논문지
    • /
    • 제18권4호
    • /
    • pp.364-371
    • /
    • 2007
  • 본 논문에서는 와이브로 기지국 시스템을 위한 고전력 PIN 다이오드 스위치와 고속 스위치 구동회로에 대한 설계와 측정 결과를 제공한다. 일반적인 전력용 팩키지 다이오드의 기생 인덕턴스에 의한 격리도 열화를 막고 다이오드 스위치의 전력 능력을 향상시키기 위해 칩 형태의 다이오드를 사용하였으며, 본딩 와이어에 의한 직렬 인덕턴스는 전송선로의 임피던스에 쉽게 흡수될 수 있도록 회로를 구성하였다. 구현된 스위치 모듈은 사용된 다이오드의 개수를 최대한 줄이면서 최대의 성능을 얻을 수 있도록 설계되었으며 2.35 GHz에서 써큘레이터의 손실을 포함하여 약 0.84 dB의 삽입 손실과 80 dB 이상의 격리도 특성을 보였다. 또한 TTL 신호를 통한 스위치 모듈의 제어를 위해 스위치 구동회로를 설계, 제작하였으며 스위칭 속도는 200 nsec로 측정되었다. 스위치 모듈은 디지털 변조된 고전력 신호에 의해 전력능력이 시험되었으며 70 W의 전력이 인가되는 경우에도 정상적으로 동작하는 특성을 보여주었다.

Mitigation of seismic pounding between RC twin high-rise buildings with piled raft foundation considering SSI

  • Farghaly, Ahmed Abdelraheem;Kontoni, Denise-Penelope N.
    • Earthquakes and Structures
    • /
    • 제22권6호
    • /
    • pp.625-635
    • /
    • 2022
  • High-rise buildings (HRBs) are considered one of the most common structures nowadays due to the population growth, especially in crowded towns. The lack of land in crowded cities has led to the convergence of the HRBs and the absence of any gaps between them, especially in lands with weak soil (e.g., liquefaction-prone soil), but then during earthquakes, these structures may be exposed to the risk of collision between them due to the large increase in the horizontal displacements, which may be destructive in some cases to the one or both of these adjacent buildings. To evaluate methods of reducing the risk of collision between adjacent twin HRBs, this research investigates three vibration control methods to reduce the risk of collision due to five different earthquakes for the case of two adjacent reinforced concrete (RC) twin high-rise buildings of 15 floors height without gap distance between them, founded on raft foundation supported on piles inside a liquefaction-prone soil. Contact pounding elements between the two buildings (distributed at all floor levels and at the raft foundation level) are used to make the impact strength between the two buildings realistic. The mitigation methods investigated are the base isolation, the tuned mass damper (TMD) method (using traditional TMDs), and the pounding tuned mass damper (PTMD) method (using PTMDs connected between the two buildings). The results show that the PTMD method between the two adjacent RC twin high-rise buildings is more efficient than the other two methods in mitigating the earthquake-induced pounding risk.

괴롭힘 가해자의 환경적 요인, 괴롭힘 행동유형, 가해자의 심리.행동적 결과에 대한 연구 (Environmental Factors, Types of Bullying Behavior, and Psychological and Behavioral Outcomes for the Bullies)

  • 이명신
    • 한국사회복지학
    • /
    • 제51권
    • /
    • pp.29-61
    • /
    • 2002
  • 청소년들의 괴롭힘행동에 영향을 미치는 요인 및 괴롭힘 행동으로 인해 가해자에게 나타나는 결과를 조사하고자, 괴롭힘 가해자의 환경적 요인(부모와의 갈등, 부모의 지지결여, 교사의 지지결여, 친구로부터의 소외, 따돌림 및 괴롭힘에의 노출정도), 괴롭힘 행동의 유형(따돌림, 사회적, 언어적, 신체적, 도구적 괴롭힘)과 괴롭힘 행동으로 인해 가해자에게 나타나는 결과(쾌감, 죄책감, 피해자에 대한 비난적 태도, 자아존중감, 괴롭힘 행동의 정도)간의 상호작용을 조사할 수 있는 포괄적인 연구모델을 개발하였다. 본 연구에서 개발된 모델은 괴롭힘 가해의 경험이 있는 177명의 학생들로부터 수직된 설문조사 자료를 통하여 검증되었다. 경로분석(path analysis)을 사용하여 변인들간의 구조관계를 설명할 수 있는 최적의 이론구조모델이 선정되었다.(df=78, chi-square=57.266, RMSR=0.0514, GFI=0.953, CFI=1.00). 자료분석 결과, 의미 있는 인간관계(부모, 친구)에서 지지를 받지 못하거나 갈등을 경험할 때, 지속적으로 공격적 행동에 노출되어 있을 때 괴롭힘행동이 증가하는 것으로 나타났다. 부모의 지지결여 정도가 높을수록 사회적 괴롭힘과 신체적 괴롭힘이 증가되며, 부모와의 갈등이 클수록 언어적 괴롭힘과 도구적 괴롭힘이 증가되는 것으로 나타났다. 친구로부터 소외된다고 느낄수록 따돌림행동이 감소되는 것으로 나타났다. 아울러, 따돌림에의 노출정도가 클수록 신체적 괴롭힘이 증가되며, 괴롭힘에의 노출정도가 클수록 따돌림, 신체적 괴롭힘과 사회적 괴롭힘이 증가되는 것으로 나타났다. 한편, 괴롭힘 행동유형에 따라 가해자에게 나타나는 결과를 살펴볼 때, 따돌림은 가해자의 쾌감을 증대시키는 반면, 죄책감을 감소시키고, 피해자에 대한 비난적 태도를 증가시키는 것으로 나타났다. 언어적 괴롭힘과 신체적 괴롭힘은 쾌감을 증가시킨 반면, 도구적 괴롭힘은 쾌감을 감소시키는 것으로 나타났다. 신체적 괴롭힘은 죄책감을 증대시킨 반면, 도구적 괴롭힘은 죄책감을 감소시키는 것으로 나타났다. 아울러, 따돌림과 도구적 괴롭힘은 자아존중감을 증대시키는 반면, 사회적 괴롭힘은 자아존중감을 감소시키는 것으로 나타났다. 한편, 언어적 괴롭힘은 괴롭힘 행동의 정도를 증대시킨 반면, 도구적 괴롭힘은 괴롭힘행동 정도를 감소시키는 것으로 나타났다. 환경적 요인 중에서 부코의 지지결여와 친구로부터의 소외는 가해자의 자아존중감을 감소시키며, 부모의 지지결여는 가해자의 죄책감을 감소시키는 것으로 나타났다. 아울러, 따돌림과 괴롭힘에 노출되는 정도가 클수록 괴롭힘 행동의 정도가 증대되는 것으로 나타났다. 본 연구 결과를 바탕으로, 개인적 차원에서 가해자의 감정 및 태도의 변화를 위한 개입방안, 의미 있는 인간관계 개선 및 사회적지지 증진을 위한 대인관계 개선방안, 괴롭힘행동의 감소 및 예방을 위해 학교환경을 총체적으로 재조직하기 위해 필요한 다양한 개입전략이 제시되었다.

  • PDF

94 GHz 대역의 높은 격리 특성의 MIMIC single balanced cascode 믹서 (MIMIC 94 GHz high isolation single balanced cascode mixer)

  • 이상진;안단;이문교;문성운;방석호;백태종;권혁자;전병철;윤진섭;이진구
    • 대한전자공학회논문지SD
    • /
    • 제44권9호
    • /
    • pp.25-33
    • /
    • 2007
  • 본 논문에서는 높은 격리특성과 광대역 특성을 갖고 IF 발룬을 필요로 하지 않는 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) single balanced cascode 믹서를 설계 및 제작하였다. 또한 믹서의 높은 격리특성과 광대역 특성을 위한 94 GHz 대역의 3 dB tandem 커플러를 설계 및 제작하였다. MIMIC single balanced cascode 믹서는 $0.1{\mu}m$ InGaAs/InAlAs/GaAs Metamorphic HEMT(High Electron Mobility Transistor)를 이용하여 설계 및 제작되었다. 제작된 MHEMT는 드레인 전류 밀도 665 mA/mm, 최대 전달컨덕턴스(Gm)는 691 mS/mm를 얻었으며, RF 특성으로 $f_T$는 189 GHz, $f_{max}$는 334 GHz의 양호한 성능을 나타내었다. 94 GHz MIMIC 믹서의 개발을 위해 MHEMT의 비선형 모델과 CPW 라이브러리를 구축하였으며, 이를 이용하여 MIMIC 믹서를 설계하였다. 설계된 믹서는 본 연구에서 개발된 MHEMT MIMIC 공정을 이용해 제작되었다. 94 GHz MIMIC single balanced cascode 믹서의 측정결과 변환손실 특성은 LO 신호의 크기가 10.9 dBm 일 때 94 GHz에서 9.8 dB의 양호한 특성을 나타내었다. 제작된 믹서의 LO-RF 격리도는 94 GHz에서 29.5 dB 그리고 100 GHz에서 39.5 dB의 측정 결과를 얻었다. 또한 제작된 믹서는 외부의 IF 발룬을 필요하지 않아 소형화가 가능하다. 본 논문에서 설계 및 제작된 94 GHz MIMIC single balanced cascode믹서는 기존의 balanced 믹서와 비교하여 높은 격리 특성을 나타내었다.