• 자원리싸이클링
• /
• 제20권4호
• /
• pp.3-22
• /
• 2011

최근까지 국내에서는 노천에 부존된 고품위 석회석이 주로 채광되었기 때문에 고품위 석회석의 매장량은 감소되었다. 현재는 노천에 부존된 고품위 석회석이 고갈되어 석회석의 채굴적이 심부화되고 있다. 그러나 석회석 광체가 심부화될수록 석회석에 함유된 불순물 및 유색광물의 양이 많아져 석회석의 품위가 낮아진다. 따라서 본고에서는 국내 석회석의 광상 특성, 수당현황, 그리고 용도별 규격을 조사하고 국내외 석회석 정제기술의 현황을 분석하여 국내 석회석의 품위를 향상시키는 방안을 모색하였다.

• 건축역사연구
• /
• 제25권3호
• /
• pp.37-45
• /
• 2016

This study was to investigate the firing method of limestone in Joseon Dynasty, and analyze the physical chemical properties of lime mortars in Joseon Dynasty. This study was to manufacture and evaluate the firing experiment and mortar of Limestone by each sort in order to reproduce the traditional lime mortars in Joseon Dynasty, and investigate the behavior to improve physical properties according to the firing method of Limestone. This study has found out that there were screening criteria and standard of appropriate firing temperature about the Limestone in Joseon Dynasty. Accordingly, this study was to improve its strength through various additives and mixture. In particular, in case of Limestone, the black and blue Limestone were preferred, and most of domestic Limestones were low grade Limestone including the clay and took ivory white or blue with low whiteness. This study has shown that the low grade Limestone was mined by the surface mining compared with the high grade Limestone as underground mining method, and could be used because it was easy to mine relatively and there was possibility that Natural Hydraulic Lime(NHL) was used with the traditional lime mortars in Joseon Dynasty.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.132-137
• /
• 2014

The study was performed with low-grade limestone, which is used to make cement or is disposed of due to its low CaO content. In this study, the optimal condition of limestone with which to manufacture precipitated calcium carbonate (PCC) and limestone in fiber was determined through in-situ reactions. The best firing condition is with slaked lime with rapid cooling after 2 h of firing at $1000^{\circ}C$. In addition, the content of CaO can be increased by sorting the low-grade limestone using a 200 mesh filter, and the optical quality of old newspaper (ONP) was similar when using both low-grade and high-grade limestone. Also, controlling the particle size of PCC is an important factor pertaining to the optical characteristics of paper.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.743-748
• /
• 2019

본 연구에서는 저품위 석회석 활용 가능성 향상을 위하여 실제 화력 발전소의 습식 배연탈황설비를 공정 모사 하였고, 품위 별 석회석 혼합 비율에 따른 탈황 석고 품질을 예측하는 모델을 개발하였다. 현재 화력 발전소에서는 판매 가능한 순도(93%)의 탈황 석고를 생산하기 위해 $CaCO_3$함량 93% 이상의 고품위 석회석을 활용하고 있으나 자원 고갈에 대한 해결책이 필요하다. 공정 모델링에 있어서 여러 반응이 모델 개발에 고려되었는데 4단계로 나누어 주었다. 첫 번째로 석회석 용해 반응은 RSTOIC 모델을 사용했고 두 번째로 황산화물 흡수 및 결정화 반응은 RCSTR 모델을 사용했다. 마지막으로 최종 생성물을 SEPERATORS 모델을 사용해 분리해 주었다. 각 반응 단계를 나누어 모델링 하여 부반응 및 물리적 방해 요인 조절에 용이하도록 했다. 최적화 조건으로는 석고 순도 93%, 탈황효율 94%, 총 석회석 사용량 3710 kg/hr를 제약조건으로 설정해주었다. 제약조건 상에서 저품위 석회석의 mass flow를 최대화하는 것을 목적함수로 최적화를 진행해 주었다. 최적화 결과 제약조건에 대하여 고품위 석회석 2,100 kg 당 저품위 석회석 1,610 kg 혼합 가능함을 확인했다.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.206-214
• /
• 2016

This study aims to produce dolomitic hydraulic lime (D-NHL) using domestic low grade dolomitic limestone and to determine the effect of adding blast furnace slag (BFS) and gypsum as part of an investigation of the hydration properties of D-NHL to increase the mechanical properties. The main mineral phases of D-NHL as a hydraulic lime binder were $Ca(OH)_2$, $Mg(OH)_2$, $C_2S$, $C_3S$, and MgO residues. $Ca(OH)_2$ transformed into $CaCO_3$ in D-NHL paste over the period of 28 days, but the carbonation of $Mg(OH)_2$ and the hydration of $C_2S$ did not occur until hydration, after 28 days. Through an investigation of the hydration properties of D-NHL pastes mixed with BFS and gypsum, Al-based compounds such as calcium aluminate hydrates ($C_4AH_{13}$) and ettringite were observed at early hydration time. The compressive strength was improved due to the increased quantities of these hydration products. These results show that good performance results from the application of dolomitic hydraulic lime and that a high value product can be made from domestic waste materials.

• 지구물리와물리탐사
• /
• 제20권3호
• /
• pp.137-145
• /
• 2017

다양한 화학산업에서 사용되는 고품위 석회석은 국내 태백산 분지 일대 상부 풍촌층에 분포하고 있다. 물리탐사는 광범위한 지표면 아래의 지질구조를 조사하는데 가장 효율적인 방법이다. 고품위 석회석 조사와 관련된 물리탐사 연구사례가 거의 선행되지 않았으므로 석회석 조사에 적절한 탐사전략이 아직 마련되지 않았다. 따라서 이 연구에서 암상별 물성연구를 바탕으로 최적의 고품위 석회석 탐사방법을 제안하고, 탐사결과 해석에서 필요한 데이터베이스를 축적하는데 초점을 두었다. 연구를 위한 암석시료는 정선 일대 하부 화절층, 풍촌층, 암맥류를 대상으로 현장 시추 코어에서 채취했고, 실내 물성 측정과 암석 기재를 수행했다. 풍촌층 암석의 대자율은 하부 화절층과 암맥보다 확연히 낮으므로 이러한 암상 경계는 자력 탐사로 구분할 수 있을 것으로 보인다. 또한, 중부 풍촌층 암석의 전기적 물성, 특히 충전성은 상부/하부 풍촌층과 비교하면 차이가 나므로 상부 풍촌층의 고품위 석회석은 유도분극 탐사로 찾을 수 있을 것으로 판단했다.

• 자원환경지질
• /
• 제1권1호
• /
• pp.9-34
• /
• 1968

Manganese ore deposits of the Samhan Changgun Properties are located at the valley of west-lope-side of Changgun-bong (1132m) occupied over the Myon border between Sochon-myon and Jaesan-myon Pongwha-gun, Kyongsang-Pukdo. Geology of the more property and it's vicinity consists of Wonnan formation and Yulri formation of pre-Cambrain and Changgun limestone formation, Mica-schist formation, quartizite formation and Jaesan formation (containing coal bearing zone the unknown age. And granites and dykes were intruded into the above formation later. 1. Management deposits is embedded the formation of Janggun limestone especially Contact zone in the contact zone to of Chunyang Granite limestone enclosed by Granite, and Maginal zone of fault line in the limestone. Therefore, Chunyang Granite is Closely related to ore deposit. Pegmatite which is near by ore deposit was intruded before mineralization and it seems to be a channelway of ore solution. The most important ore deposits of property grouped into south deposit, east deposit, east-Gachon deposit, South-Gachon deposit, Durimgok deposit and West deposit, out-crops at several place. Besides these deposits there also are several prospects on outcrop scathered. Hydrothermal alteration take place strongly in the well rock and it's sequence are Characterized as following; 1) Dolomitization 2) Carbonization 3) Mamgamotozation 4) Pyritization 5) Silicification 6) Oxidation 2. The grade of manganese dioxide is up to Mn 45% in Maximum, but generally, averaging Mn 30~35% of high grade ore and averaging Mn 30~32% of manganese carbonates are mined in his property.

• 한국세라믹학회지
• /
• 제18권4호
• /
• pp.262-268
• /
• 1981

Experimental investigation has been carried out to study the characteristics of the various grade limestones in Samtaesan formation with the fundamental test (mineral compostion, thermal decomposition and etc.) and intrinsic reactivity test. It was shown that belite formation in low grade limestones is faster than high grade limestone, but alite formation has a contrary.

• 산업기술연구
• /
• 제21권A호
• /
• pp.251-256
• /
• 2001

This research is focused on an improvement of additional value of high grade limestone. To obtain the basic data of precipitated calcium carbonate(PCC), studies of physical properties of limestone, calcination and hydration characteristics, the characteristics to manufacture quick lime, hydrated lime, ground calcium carbonate and precipitated calcium carbonate were performed. In the carbonation process, formation of rombohedral must be kept under $10^{\circ}C$ for reaction. Although the temperature of reaction of lime milk was limited under $30^{\circ}C$ for a colloidal PCC manufacture, over $50^{\circ}C$ for spindle type PCC. The recommended reaction conditions for colloidal PCC are $20^{\circ}C$ of reaction temperature, 4% of $Ca(OH)_2$ concentration, 1000rpm of stirring rate and 200ml/min of $CO_2$ gas flow rate.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.