• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.81-84
• /
• 2005

In this paper, we investigate the method for reducing the amount of feedback in multi-user downlink orthogonal frequency division multiple access (OFDMA) systems. The objective is to maximize the total throughput of the system under the constraints of transmit power. In previous methods, each user in a cell transmits channel quality information (CQI) of its all sub-bands to the base station, which requires extremely high feedback overhead. Thus, we propose an efficient sub-band allocation algorithm in which each user transmits partial CQI and one additional information to reduce the amount of feedback. Simulation results show that we can greatly reduce the amount of feedback than full feedback system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.44-51
• /
• 2015

The deployment of high capacity backhaul is required due to explosive growth in mobile data services. For rapid backhaul deployment, point to point microwave is a much easier and cheaper technology. The space diversity scheme is used in point to point microwave links. The purpose of space diversity is to overcome fading by combining signals from two separate receiver antennas. For signal combining algorithm, maximum power and minimum distortion methods were used and these algorithms were reported not to be good enough for robustness in selective fading. In this paper, a more practically efficient signal combining scheme from the main and diversity branch is proposed and evaluated in selective fading channel. The proposed algorithm has shown significant performance improvement in terms of signal spectrum.

• Journal of Communications and Networks
• /
• v.16 no.1
• /
• pp.45-55
• /
• 2014

The paper investigates the problem of designing the multiple-antenna relay in a two-way relay network by taking into account the imperfect channel state information (CSI). The objective is to design the multiple-antenna relay based upon the CSI estimates, where the estimation errors are included to attain the robust design under the worst-case philosophy. In particular, the worst-case transmit power at the multiple-antenna relay is minimized while guaranteeing the worst-case quality of service requirements that the received signal-to-noise ratio (SNR) at both sources are above a prescribed threshold value. Since the worst-case received SNR expression is too complex for subsequent derivation and processing, its lower bound is explored instead by minimizing the numerator and maximizing the denominator of the worst-case SNR. The aforementioned problem is mathematically formulated and shown to be nonconvex. This motivates the pursuit of semidefinite relaxation coupled with a randomization technique to obtain computationally efficient high-quality approximate solutions. This paper has shown that the original optimization problem can be reformulated and then relaxed to a convex problem that can be solved by utilizing suitable randomization loop. Numerical results compare the proposed multiple-antenna relay with the existing nonrobust method, and therefore validate its robustness against the channel uncertainty. Finally, the feasibility of the proposed design and the associated influencing factors are discussed by means of extensive Monte Carlo simulations.

• Advances in nano research
• /
• v.2 no.3
• /
• pp.173-177
• /
• 2014

This study is aimed to the numerical modeling of the surface plasmon-polariton excitation by a layer of active (electrically pumped) quantum dots embedded in a semiconductor, covered with a metal. It is shown that this excitation becomes much more efficient if the metal has a form of a thin (with thickness of several nanometers) film. The cause of this enhancement in comparison with a thick covering metal film is the partial surface plasmon-polariton localized at the metal-semiconductor interface penetration into air. In result the real part of the metal+air half-space effective dielectric function becomes closer (in absolute value) to the real part of the semiconductor dielectric function than in the case of a thick covering metal film. This leads to approaching the point of the surface plasmon-polariton resonance (where absolute values of these parts coincide) and, therefore, the enhancement of the surface plasmon-polariton excitation. The calculations were made for a particular example of InAs quantum dot layer embedded in GaAs matrix covered with an Au film. Its results indicate that for the 10 nm Au film the rate of this excitation becomes by 2.5 times, and for the 5 nm Au film - by 6-7 times larger than in the case of a thick (40 nm or more) Au film.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.217-225
• /
• 2004

In this paper, a new automatic classification method for the normal EEC and schizophrenia EEC using hidden Markov model(HMM) is proposed. We used the feature parameters which are the variance for statistical stationary interval of the EEC and power spectrum ratio of the alpha, beta, and theta wave. The results were shown that high classification accuracy of 90.9％ in the case of normal person, and 90.5％ in the case of schizophrenia patient. It seems that proposed classification system is more efficient than the system using complicate signal processing process. Hence, the proposed method can be used at analysis and classification for complicated biosignal such as EEC and is expected to give considerable assistance to clinical diagnosis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.777-782
• /
• 2017

The Signal Intelligence (SIGINT) system based on the adaptive beamformer, comprised of the AOA estimator followed by the interference canceller, is a cutting edge technology for collecting various signal information utilizing all sorts of devices such as the radar and satellite. In this paper, we present the efficient adaptive SIGINT structure consisted of an AOA estimator and an adaptive beamformer. For estimating AOA information of various signals, we employ the Multiple Signal Classification (MUSIC) algorithm and for efficiently suppressing high-power interference signals, we employ the Minimum Variance Distortionless Response (MVDR) algorithm. Also, we provide computer simulation examples to verify the performance of the presented adaptive beamformer structure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.5
• /
• pp.16-25
• /
• 2009

Testing engine performance using an engine dynamometer requires high technical researchers and many facilities. Nowadays, different variables of CAE program are used for identifying the engine performance instead of engine dynamometer test. This is more convenience, as it does not necessitate an abundance of engine dynamometer experiments and, in addition, produces better results. However, CAE programs also contain various variables which can affect engine performance. Those are coupled with each other, thus making it difficult to determine the effectiveness of different variables on engines. DoE (Design of Experiments) methodology is an efficient way to verify the magnitude of effectiveness on engine performance as well as making responses to be optimized at once without trial & error. This study used data from WAVE simulations, which modeled the DOHC SI engine with in-line 4 cylinders at 1500, 3000 and 4500rpm. DoE methodology is designed properly to determine the effectiveness of five variables on power, BSFC, and volumetric efficiency, as well as to find the optimal response conditions at each rpm through a minimized number of experiments. After finishing DoE process, all the results are examined concerning the reliability of test through a verification experiment.

• Journal of Broadcast Engineering
• /
• v.12 no.4
• /
• pp.342-349
• /
• 2007

In general multi-view system, all the view sequences acquired at the server are transmitted to the client. However, this kind of system requires high processing power of the server as well as the client, thus it is posing a difficulty in practical applications. To overcome this problem, a relatively simple method is to transmit only two view-sequences requested by the client in order to deliver a stereoscopic video. In this system, effective communication between the server and the client is one of important aspects. Therefore, we propose an efficient multi-view system that transmits two view-sequences according to user's request. The view selection process is integrated into MPEG-21 DIA (Digital Item Adaptation) so that our system is compatible to MPEG-21 multimedia framework. Furthermore, multi-view descriptors related to multi-view camera and systems are newly introduced. The syntax of the descriptions and their elements is represented in XML (extensible Markup Language) schema. Intermediate view reconstruction (IVR) is used to reduce such discomfort with excessive disparity. Furthermore, IVR is useful for smooth transition between two stereoscopic view sequences. Finally, through the implementation of testbed, we can show the valuables and possibilities of our system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.42-46
• /
• 2005

In spite of fast growing of prediction codes, there is still not negligible uncertainty in their results. This uncertainty affects on the turbine structural design and power production prediction. With the growing size of wind turbine, reducing this uncertainty is becoming one of critical issues for high performance and efficient wind turbine design. In this respect, there are international efforts to evaluate and tune prediction codes of wind turbine. As the reference data for this purpose, field test data is not appropriate because of its uncontrollable wind characteristics and its inherent uncertainty. Wind tunnel can provide controllable wind. For this reason, NREL has done the full scale test of the 10m turbine at NASA-Ames. With this reference data, a blind comparison has been done with participation of 18 organizations with 19 modeling tools. The results were not favorable. In Europe, a similar project is going on. Nine organizations from five countries are participating in the MEXICO project to do full scale wind tunnel tests and calculation with prediction codes. In this study. these two projects were reviewed in respect of wind tunnel test and its contribution. As a conclusion, it is suggested that scale model wind tunnel tests can be a complementary tool to calculation codes which were evaluated worse than expected.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.5
• /
• pp.309-317
• /
• 2004

This paper suggested the vibration characteristic improvement by variation mode of ring type ultrasonic motor. Design for the piezoelectric ceramic and elastic body of stator were calculated by the finite element method(FEM) that consider the resonance frequency, vibration mode and coupling efficiency etc. Through the result of vibration analysis from 6 order mode to 8 mode, the 7 order mode was gained very an excellent results that it was the coupling efficient, minimum power loss and bending vibration value. Here over 7 order mode, this paper was acquired that an output current for input voltage was very a large increased results. The result of vibration calculation, from thickness 0.5[mm] to 2[mm], knew the fact that the vibration displacement at 0.5[mm] is an high value too. From such result, this paper was manufactured the ultrasonic motor of outer diameter 5O[mm] , inter 22[mm] having the about 43.86[KHz] resonance frequency. We have gated that a simulation result is 42.2[KHz] and an experiment result is 43.86[KHzl The propriety of this paper was established though comparison. investigation of simulation and experiment result.