• 제목/요약/키워드: High-early-Strength Concrete

검색결과 461건 처리시간 0.028초

배합설계 조건에 따른 고성능 콘크리트의 조기강도 발현특성에 관한 연구 (An Experimental Study on the Properties of Early-Strength for high performance Concrete according to Mix Design)

  • 최성우;유종수;백철우;김정식;류득현
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.231-232
    • /
    • 2009
  • 본 연구에서는 고성능 콘크리트의 조기강도 발현 특성에 대한 배합설계의 영향을 검토한 것으로서, 특히 혼화재의 종류 및 사용량에 따른 조기재령에서의 강도발현특성을 검토하여, 고성능 콘크리트의 배합설계시 현장 시공조건에 따른 효율적인 배합설계를 위한 기초자료를 제시하고자 하였다.

  • PDF

고로슬래그를 사용한 고강도 부순모래 경화콘크리트의 물성에 관한 실험적 연구 (An Experimental Study on the Properties of the High Strength Crushed Sand Concrete Using Blast-Furnace Slag)

  • 최영화;김종인
    • 한국산업융합학회 논문집
    • /
    • 제8권3호
    • /
    • pp.169-176
    • /
    • 2005
  • The purpose of this study is to develop the high strength crushed sand concrete in conditions of water binder ratios of 25, 30, 35% and blast-furnace slag substitutions of 0, 15, 30, 45%. Additionally, in case of water binder ratio of 30%, the maximum size of coarse aggregate is two kinds of 13, 19 mm. The conclusions of this study are as follows ; 1. The compressive strength appeared lower in early age as compared with that of plain concrete according to increasing of the blast-furnace slag substitution. But, the compressive strength was respectively 5, 6, 10% larger than that of plain concrete in case of 25, 30, 35% water binder ratios, 28 days, 30% blast-furnace slag substitution and 19mm coarse aggregate. 2. According to increasing of the blast-furnace slag substitution, the modulus of elasticity and the tensile strength of concrete increased. 3. The length change by the shrinkage increased when the larger coarse aggregate was used, and decreased according to higher blast-furnace slag substitution.

  • PDF

플라이애쉬 치환율이 높은 콘크리트의 압축강도 발현 특성 (The Characteristic of Strength Development of High Volume Fly-Ash Concrete)

  • 박찬규;이승훈;김한준
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2007년도 추계 학술논문 발표대회
    • /
    • pp.67-70
    • /
    • 2007
  • In this study, the characteristic of strength development of high volume fly ash concrete(HVFAC) was experimentally investigated. The production of one ton of portland cement releases about 0.87ton of CO2 into the atmosphere. HVFAC is an emerging material technology and is environmentally friendly because of its reduced use of portland cement, reduced CO2 emissions. For this purpose, two levels of W/B were selected. Seven levels of fly ash replacement ratios and two levels of silica fume replacement ratios were adopted. In the concrete mix, the water content of 125kg/m3 was used, which is less than that of usual water content. As a result, it was observed that the slump of concrete was increased with the increasing fly ash replacement ratio and when the silica fume was incorporated into the concrete, the slump was significantly decreased at the same condition. It appeared that the compressive strength gradually decreased with increasing fly ash replacement ratio at the early age, but the difference of strength up to replacement ratio of 50% was little at the age of 91 days because of the pozzolanic reaction of fly ash.

  • PDF

증기양생한 고로슬래그 다량치환 시멘트 콘크리트의 압축강도 특성 (Compressive Strength Properties of Steam-cured High Volume GGBFS Cement Concrete)

  • 홍성현;김형석;최슬우;이광명;최세진
    • 한국건설순환자원학회논문집
    • /
    • 제3권1호
    • /
    • pp.1-6
    • /
    • 2015
  • 최근 $CO_2$ 감축을 위해 고로슬래그 미분말과 같은 혼화재의 치환율을 높이기 위한 연구가 활발히 이루어지고 있다. 프리캐스트 콘크리트의 경우 증기양생을 실시하기 때문에 혼화재의 치환율을 높여도 초기 강도 확보에 유리한 것으로 알려져 있다. 하지만 다양한 증기양생이력에 따른 압축강도 특성에 대한 연구가 요구된다. 따라서 본 연구에서는 고로슬래그 다량치환(질량비 60%) 시멘트 콘크리트의 증기양생 이력에 따른 콘크리트 압축강도 특성을 규명하기 위해 물-결합재비(W/B) 32, 35%, 단위수량 135, $150,165kg/m^3$ 수준으로 콘크리트를 제조하였다. 그리고 공시체의 최고온도(50, $60^{\circ}C$) 및 최고온도유지시간(5, 6, 7hr)을 변수로 증기양생을 실시하였다. 실험결과, 증기양생을 통해 높은 초기강도를 얻을 수 있었지만 28일 압축강도에서 강도가 저하되는 현상을 확인할 수 있었다. 따라서 고로슬래그 다량치환 시멘트 콘크리트의 프리캐스트 콘크리트 부재에의 적용을 위해서는 탈형강도 및 요구강도를 확보할 수 있는 증기양생 이력에 대한 추가적인 연구가 필요하다.

석회석 미분말 및 플라이애쉬 치환율 변화에 따른 고유동 콘크리트의 특성에 관한 연구 (A Study on the Properties of High Fluidity Concrete Incorporating Lime Stone Powder and Fly Ash)

  • 조병영;윤길봉;황인성;한민철;윤기원;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.287-292
    • /
    • 2001
  • This paper investigates the properties of high fluidity concrete incorporating lime stone powder and fly ash. Lime stone powder(LSP) and fly ash(FA) contents are varied with. According to test results, as LSP and FA contents increase, fluidity, air content and placeability shows a declining tendency. For the temperature history, both LSP and FA have favorable effects on reducing hydration heat, moreover, LSP reduces hydration heat more than FA. LSP shows undesirable strength loss as its content increases. FA also decreases the strength at early age, but it enhances later age strength. Accordingly LSP is expected to improve the quality at fresh concrete and reduce hydration heat, while it causes strength loss.

  • PDF

숏크리트용 급결제의 품질, 응결 및 경화특성 (Quality, Setting and Hardening Properties of Rapid Set Accelerators)

  • 김진철;류종현;안태송
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.323-328
    • /
    • 2002
  • Rapid set accelerators are widely used in tunnel construction, however quality criteria of and dosage are not well established. The density and solid content of admixtures, setting time and compressive strength of paste and mortar with admixtures were investigated to establish the quality criteria. While the early strength of mortar with sodium-silicate, sodium-aluminate and calcium aluminate type admixtures that have high alkali content are very high, but long-term strength are low. Aggregates of shotcrete has to be carefully selected. Sodium-silicate type admixture need longer setting time than the others.

  • PDF

설계강도 120MPa 초고강도 콘크리트의 초기재령 자기수축 특성 연구 (Autogenous and Drying Shrinkage Behavior of Ultra-High-Strength Concrete at Early Ages)

  • 김지원;손유신;이주하;김규동;이승훈;윤영수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.293-296
    • /
    • 2004
  • In this study, to investigate autogenous shrinkage behavior of 120MPa UHSC at early ages, free and restrained shrinkage tests are performed for various strength levels(50MPa, 80MPa, 120MPa). For 120MPa, the effect of fly ash on autogenous shrinkage was also investigated. In order to assess the potential for early-age cracking in concrete and a mixtures susceptibility to shrinkage cracking, restrained ring test was carried out. Test results show that autogenous shrinkage of UHSC was much higher than that of HSC, VHSC and fly ash delayed cracking age in UHSC by decreasing autogenous shrinkage.

  • PDF

고강도용 혼합재를 사용한 고강도 콘크리트의 기초물성 및 내화특성 검토 (The Fundamental Property and Fire Resistance of the High Strength Concrete Corresponding to mixtures for the High Strength)

  • 김종백;이건호;배준영;조성현;노현승;김정환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.605-608
    • /
    • 2008
  • 본 연구는 고강도 혼합재 사용에 따른 고강도 콘크리트의 기초물성 및 내화특성을 검토한 것으로, 그 결과를 요약하면 다음과 같다. 유동특성으로 고강도 혼합재를 사용할 경우, 실리카흄을 사용한 경우보다 목표 슬럼프플로우를 만족키 위한 고성능 감수제의 사용량이 감소하는 것으로 나타나, 유동성 확보 차원에서 고강도 혼합재를 사용할 때 실리카흄과 비교할시 우수한 것으로 나타났다. 강도특성으로는 고강도 혼합재 사용 시 재령 7일 초기압축강도가 실리카흄을 사용한 경우보다 증가하는 것으로 나타나, 초기 강도 확보에서 유리함을 확인할 수 있었고, 재령 28일에서는 모두 비슷하게 압축강도를 발현하는 것으로 나타났다. 섬유 혼입율 변화에 따른 압축강도는 미소한 차이만 있을 뿐 큰 차이는 없는 것으로 나타났다. 섬유 무혼입에서 고강도 혼합재 및 실리카흄 모두 폭열이 발생하였지만, 섬유 혼입량 0.05% 이상에서는 폭열이 방지되는 것으로 나타났다.

  • PDF

조강시멘트를 사용한 초조강 모르타르 개발에 관한 연구 (Study on the Development of Super-High-Early-Strength Mortar Using the Hardening catalyst and High early strength cement)

  • 조인성;허연옥;민태범;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 추계 학술논문 발표대회
    • /
    • pp.217-219
    • /
    • 2012
  • In this study, the experiment was conducted in the level of mortar as one of the basic studies on pre-cast concrete which acceleration curing is not done. This study has the purpose to develop the strength of mortar into 20MPa within 6 hours in the condition of room temperature using admixtures which can accelerate C3S hydration reaction. In this experiment, W/C was fixed into 20%, PCE which can stimulate C3S was used as an accelerating admixture. From the results of this experiment, maximum content of accelerating admixture was 1%. Also, as more than 20MPa was measured through 6-hour compressive strength, it can be known that strength can be developed without steam-curing.

  • PDF

PSC 교량용 설계강도 60MPa 이상 고강도 콘크리트의 실용화를 위한 시간의존적 변형 및 내구성에 관한 연구 (Time-Dependent Deformation and Durability of High-Strength Concrete over 60MPa for PSC Bridges)

  • 양준모;이주하;정해문;안태송;윤영수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.5-8
    • /
    • 2006
  • In this study, various fundamental experiments including durability and time-dependent deformation are performed to compile a database for a utilization of high-strength concrete for PSC bridges. In the mix design, concrete strength at early age when prestressing forces are introduced to the PSC member and slumpflow suitable for pumping of concrete are considered to make a concrete fit for PSC bridges. The main parameters investigated are the kinds and replacement ratios of mineral admixtures and low-heat cement. Experimental tests on durability include penetration of chloride ions, freezing-thawing, combined deterioration, and simple adiabatic temperature rise test. In addition, time-dependent deformation such as creep, drying and autogenous shrinkage, which is particularly important factor in the design and construction of PSC bridges, is tested and analyzed.

  • PDF