• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2005년도 추계학술대회 및 정기총회
• /
• pp.347-353
• /
• 2005

WiBro (Wireless Broadband Internet) system is going to be commercialized before long. The high portable internet system is abie to be connected to the high-speed internet using 2.3 CHz frequency bandwidth, anytime and anywhere. An effective scheduling for UCS, rtPS. nrtPS and BE requiring different QoS, which are service types of the WiBro, is necessary to increase the efficiency of radio channels that arc the limiting resource. This paper researches an uplink scheduling that plays a role in assignment for the radio channels from subscribers to base stations. The suggested scheduling provides priorities With each service type considering QoS of them but reserves some bandwidth for lower priory services. After deciding effective amount of bandwidth for reservation, we suggest analytical result on mean delayed time of packet transmission for each terminal, transmission rate for the data, and capacity for uplink. This research can be used as basic data for the standard in the high portable internet system and as data to predict the capacity of base stations.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.245-250
• /
• 2006

Organizations such as broadcasting stations and libraries which deal with huge amount of information require high-capacity storage systems for archiving their materials and information. It is necessary and urgent for the storage people to develop a compact, high capacity, and low-cost data storage systems. Even though the Blue-ray technology is commercialized and now it is on the market, demand for the compact and low-cost system is still increasing. A flexible disk system has been introduced recently to satisfy above mentioned requirements. The system uses multiple of thin disks and is expected to achieve technical requirements. However, decreasing the disk thickness makes it difficult to read and write data because it decreases the disk rigidity so that the transverse vibration of the rotating disk increases easily due to both the interaction with surrounding air and the vibration characteristics of thin flexible disk itself. In this study, flat-type stabilizer is proposed to suppress the transverse vibration of a $95{\mu}m$-thick polycarbonate disk. Characteristics of disk vibration have been studied through the results of numerical analysis from the fluid mechanics point of view. Numerical simulation is verified through the experiment by measuring the gap between the rotating disk and the stationary flat stabilizer. The axial deflections of the disk are computed for various rotating speeds and reference gap sizes and then a method of regression is applied to those data. As a result, an empirical relation is proposed for the steady deformation shape of the rotating disk.

• 한국인터넷방송통신학회논문지
• /
• 제19권4호
• /
• pp.1-6
• /
• 2019

CCTV 영상 녹화 시스템은 영상 데이터의 증거가치로 인정받음으로 인해, 시설물의 경비 혹은 보안 관제의 목적으로 실생활에 널리 사용되고 있다. 최근 인터넷의 기술의 혁신으로 유/무선 네트워크를 통해 고화질 고용량의 데이터를 실시간 처리할 수 있도록 발전하고 있다. 영상 녹화 장치에서의 녹화 데이터는 중요하지만, 이를 유지하기 위한 방법, 특히 예기지 않은 장비의 결함이나 외부 공격에 의한 영상 데이터 손실을 막기 위한 이중화 방안은 드물다. 어렵게 이중화를 구현한다고 하더라도 고용량의 영상 데이터가 네트워크를 통해 전달되면서 발생하는 네트워크 과부하를 피할 수 없다. 본 논문에서는 CCTV 네트워크 영상 녹화 환경에서 네트워크 과부하를 유발하지 않고 이중화를 운영할 수 있는 장애 조치 기법을 제시하고 검증한다.

• ETRI Journal
• /
• 제34권4호
• /
• pp.613-616
• /
• 2012

A multi-spot-beam satellite is an attractive technique for future satellite communications since it can support high data rates by projecting high power density to each spot beam and can reuse a frequency in different cells to increase the total system capacity. In this letter, we propose a resource management technique adjusting the bandwidth of each beam to minimize the difference between the traffic demand and allocated capacity. This represents a reasonable solution for dynamic bandwidth allocation, considering a trade-off between the maximum total capacity and fairness among the spot beams with different traffic demands.

• ETRI Journal
• /
• 제40권3호
• /
• pp.330-336
• /
• 2018

Free-space optical (FSO) systems have attracted much attention from both research and application perspectives owing to their many benefits, such as license-free operation, low-cost, and high data rates. This paper investigates the ergodic capacity of FSO systems, which is an important metric of system performance. The stochastic temporary laser-beam blockage, pointing errors, and atmospheric turbulence are simultaneously considered. The results illustrate that the link blockage causes a decreased ergodic capacity. We show that to maximize the ergodic capacity, there is an optimal value of the laser-beam radius at the waist, which largely depends on pointing errors; however, it is independent of the atmospheric turbulence and the probability of link blockage.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1047-1054
• /
• 2003

Smart battery pack (SBP) for notebook PCs was developed using a cylindrical-type lithium ion battery. Batteries were connected with three serial and two parallel, the nominal capacity and the maximum load of SBP was 4,000mAh and 4.0A, respectively. The SBP was composed of a protection IC, by which safety of lithium ion batteries is maintained against overcharge, overdischarge and overcurrent, and a smart IC, which calculates the remaining capacity and the remaining run time. In matching test on notebook PC using Battery Mark 4.0, real and smart data of END voltage coincided nearly and LB and LLB signal worked norma]]y. And there were errors of less than 1% between the real and the smart data on the residual capacity in the charge and discharge test.

• 디지털콘텐츠학회 논문지
• /
• 제5권4호
• /
• pp.306-310
• /
• 2004

본 논문에서는 HDR-WPAN(high data rate wireless personal area network) 시스템에서 TCM-128QAM 변조 방식과 25MHz. 대역폭 확장을 통한 전송용량 향상 방안을 제안하였다. TCM-128QAM의 변조방식을 사용하였을 경우, 15MHz의 대역폭에서 최대 66Mbps의 전송속도를 나타낼 수 있지만, roll-off 계수 ${\alpha}=0.35$으로 하고 대역폭을 25MHz로 확장하였을 경우, 최대 110Mbps의 전송속도를 나타낼 수 있다. 이 같은 결과를 PSD(power spectrum density) 분석 및 BER(bit error rate) 성능을 이용하여 확인하였다.

• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.767-773
• /
• 2004

UWB(Ultra-Wide Bandwidth) 통신 시스템은 멀티미디어 정보와 같은 대량, 고속 통신을 요구하는 추세에 부합하는 통신 방식으로 맡은 관심을 받고 있다. UWB 통신 방식에서 중요한 특징은 시간 영역에서 매우 폭이 좁은 펄스를 사용하여 정보를 전송하며, 펄스의 위치를 변조시키는 PPM(Pulse Position Modulation)을 사용하는 점이다. 따라서, 송신기와 수신기의 타이밍 지터(timing jitter)는 매우 중요한 역할을 하며, 이들 지터가 UWB 통신 시스템에 미치는 영향을 정확히 해석하는 것은 매우 중요하다. 따라서 본 논문에서는 이와 같은 지터의 영향을 해석하는 방법을 제시하였다. 이때 본 논문에서 계산한 것은 M-진 PPM UWB 통신 시스템 용량(capacity)이다. 또한, 다중 사용자 환경에서 지터의 영향도 함께 해석하였다.

• Steel and Composite Structures
• /
• 제48권5호
• /
• pp.531-545
• /
• 2023

Composite dowels are implemented as a powerful alternative to headed studs for the efficient combination of Ultra High-Performance Concrete (UHPC) with high-strength steel in novel composite structures. They are required to provide sufficient shear resistance and ensure the transmission of tensile forces in the composite connection in order to prevent lifting of the concrete slab. In this paper, the load bearing capacity of puzzle-shaped and clothoidal-shaped dowels encased in UHPC specimen were investigated based on validated experimental test data. Considering the influence of the embedment depth and the spacing width of shear dowels, the characteristics of UHPC square plate on the load bearing capacity of composite structure, 240 numeric models have been constructed and analyzed. Three artificial intelligence approaches have been implemented to learn the discipline from collected experimental data and then make prediction, which includes Artificial Neural Network-Particle Swarm Optimization (ANN-PSO), Adaptive Neuro-Fuzzy Inference System (ANFIS) and an Extreme Learning Machine (ELM). Among the factors, the embedment depth of composite dowel is proved to be the most influential parameter on the load bearing capacity. Furthermore, the results of the prediction models reveal that ELM is capable to achieve more accurate prediction.

• 전자통신동향분석
• /
• 제37권3호
• /
• pp.64-73
• /
• 2022

As the COVID-19 pandemic has decreased face-to-face communication in everyday life, our interest in cultural communication via virtual world has grown significantly. In particular, the demand for applications that use three-dimensional (3D) data generation technology such as virtual reality, augmented reality, virtual performances, and realistic content is rapidly increasing in the entertainment and gaming industries. Additionally, improved computing capacity has increased the demand for high-resolution data. This study investigates the trends in 3D scanning and photogrammetry technologies that can support high-quality 3D data generation and introduces the high-resolution 3D data generation technology developed and reported in ETRI.