• 한국농공학회지
• /
• 제44권7호
• /
• pp.36-45
• /
• 2002

Most of rural bridges have passed 30 years of age since they were built, which have to support unexpected overload caused by changed design load and excessive amount of transportation. For these rural bridges, repairs and replacements are needed. Even though there have been attempt to estimate the safety of existing bridges deteriorated with major defects, those approaches must rely on the observable damage and subsequent decisions are made subjectively. To avoid the high cost of rehabilitation, the bridge rating must correctly represent the present load-carrying capacity. Rating engineers use a methods such as Allowable Stress Design (ASD), Load Factor Design (LFD), and Load Resistance Factor Design (LRFD) to evaluate the bridge load carrying capacity. In this paper, the load rating methods are introduced, and it is illustrated how to use the load test data from literature survey. Load test is conducted to the bridge that was built 30 years ago in rural area. From load test results, new maintenance method is suggested instead of the bridge replacement.

• 한국통신학회논문지
• /
• 제27권3B호
• /
• pp.212-219
• /
• 2002

본 논문에서는 기지국에 스마트 안테나를 사용한 이동 통신 시스템에서 기지국 다이버시티를 고려하여 빔성형 가중치 결정 방법과 전력 제어 방법을 순방향 링크와 역방향 링크에 대해 제시하고 이를 Monte-Carlo 시뮬레이션 방법을 이용하여 확인하였다. 결과에 의하면 역방향 링크에서는 다이버시티 threshold가 증가함에 따라 즉, 이동국이 더 많은 기지국들과 링크함에 따라 셀의 용량이 증가하였다. 이와 반대로 순방향 링크에서는 다이버시티 threshold가 증가할수록 용량이 감소하는 것을 확인할 수 있었다. 본 논문의 결과는 스마트 안테나를 적용한 시스템의 효율적인 무선망 운용 방식 결정의 지표가 될 것으로 기대된다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.213-220
• /
• 2004

A purpose of this research is building a Parameter Evaluation Simulation(PES) program which is present proper parameter value to calculate line capacity. This research performs a detailed simulation and a analysis of it using PES and it is developed on the basis of Line Capacity Simulation model. Chosen simulation sectors are that happened a big change of a line capacity because of joining a high speed train(KTX). Moreover this research performs a sensitivity analysis when basic data are changed.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권11호
• /
• pp.31-39
• /
• 2021

This study empirically examines the proposition that the domestic fundamentals of a nation can emerge as absorptive capacity factors to reap the benefits of inward FDI. The study is contextualized in Asia, set from1982 to 2017, and data is grouped into low-income and lower-middle-income economies, in comparison to high-income and upper-middle-income economies, catering to different geographical regions within Asia. The investigation is based on a series of absorptive capacity factors such as infrastructure, human capital, domestic credit, and health indicator. The methodological analysis is premised on dynamic panel structure and employs the Generalized Method of Moments (GMM) estimation technique. The empirical findings suggest that that the infrastructure variable appears to be the major absorptive capacity factor for both groups of countries. The health indicator, on the other hand, can help reap the benefits of inward FDI, but only if the threshold level is met. The selected economies must achieve this threshold level to reap the benefits of FDI. To absorb the benefits of inward FDI, countries must be proactive in providing sound infrastructure and implementing proper healthcare measures.

• Architectural research
• /
• 제10권2호
• /
• pp.37-42
• /
• 2008

This study is to get the proper evaluation of the residual property of reinforced concrete beam exposed to fire. This study focused on the strength resistance and analytical evaluation of RC members exposed high temperature. And this study is the basis analytical research to conduct the other studies. To analysis by the finite element method, the Total-RC program was used to analysis it and the Total-Temp program was also used to analysis the temperature distributions at the section. All of results were compared with the pre-existing experimental data of simple supported beam. Using it, the parameters influencing the structural capacity of the high temperature-damaged RC members and residual strength estimation are investigated. The temperature distribution and the structural capacity at the section are calculated in this step. An application of this method is compared with the heating test result and residual property test for simple supported beam which is subjected to ISO 834 test fire. The results of this study are as follows; 1) The loads-displacement relationship of RC beam, considering initial thermal stress of cross section and heat transfer analysis are estimated comparing analytical value with pre-existing experimental results. 2) by the heating time (0, 1, 2 hours), the results of analysis with parameters show that the load capacity exposing at fire is affected.

• The Journal of the Acoustical Society of Korea
• /
• 제27권3E호
• /
• pp.69-76
• /
• 2008

Measurements of bubble size and distribution in the surface layer of the sea, wind speed, and variation of ocean environments were made continually over a four-day period in an experiment conducted in the South Sea of Korea during 17-20 September 2007. Theoretical background of bubble population model indicates that bubble population is a function of the depth, range and wind speed and bubble effects on sound speed shows that sound speed varies with frequency. Observational evidence exhibited that the middle size bubble population fit the model very well, however, smaller ones can not follow the model probably due to their short lifetime. Meanwhile, there is also a hysteresis effect of void fraction. Observational evidence also indicates that strong changes in sound speed are produced by the presence of swarms of micro bubbles especially from 7 kHz to 50 kHz, and calculation results are consistent with the measured data in the high frequency band, but inconsistent in the low frequency band. Based on the measurements of the sound speed and high frequency transmission configuration in the bubble layer, we present an estimation of underwater acoustic channel capacity in the bubble layer.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.119-125
• /
• 2011

In this paper, we have studied about minimizing the Energy Storage System (ESS) capacity for mitigating the fluctuation of Wind Turbine Generation System (WTGS) by using Electric Double Layer Capacitor (EDLC) and Battery Energy Storage System (BESS). In this case, they have some different characteristics: The EDLC has the ability of generating the output power at high frequency. Thus, it is able to reduce the fluctuation of WTGS in spite of high cost. The BESS, by using Li-Ion battery, takes the advantage of high energy density, however it is limited to use at low frequency response. To verify the effectiveness of the proposed method, simulations are carried out with the actual data of 2MW WTGS in case of worst fluctuation of WTGS is happened. By comparing simulation results, this method shows the excellent performance. Therefore, it is very useful for understanding and minimizing the ESS capacity for mitigating the fluctuation of WTGS.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.601-602
• /
• 2006

The primary role of MRP(Material Requirement Planning) is to make a production plan so that we have an exact quantity of right materials on needed time at right place. But the ignorance on capacity constraints makes some problems whenever production schedule is established. To increase the performance of MRP system, a novel approach which is based on new input data structure is suggested. The new input data structure includes all the information about Material BOM, Routing and resource data so that we can easily examine the usage of resources and generate higher performance production plans.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권4호
• /
• pp.655-670
• /
• 2010

To be reversible as a data hiding method, the original content and hidden message should be completely recovered. One important objective of this approach is to achieve high embedding capacity and low distortion. Using predicted errors is very effective for increasing the embedding capacity. Sorting the predicted errors has a good influence on decreasing distortion. In this paper, we present an improved reversible data hiding scheme using upgraded histogram shifting based on sorting the predicted errors. This new scheme is characterized by the algorithm which is able to find the optimum threshold values and manage the location map effectively. Experimental results compared with other methods are presented to demonstrate the superiority of the proposed method.

• 정보저장시스템학회논문집
• /
• 제7권1호
• /
• pp.31-35
• /
• 2011

In microholographic data storage system (MDSS), compact recording is required to achieve high capacity.[1] When the data is recorded, neighbor monomer is also affected by reaction at the focal point.[2,3] This unintended process caused more monomer consumption and degradation of total capacity. To avoid this extra consumption of dynamic range, it is required to define the effective dynamic range for MDSS. In this paper, we experimentally investigate the relation between dynamic range consumption and micro grating formation. Dynamic range consumption was monitored by real time read-out system. Micrograting was recorded with different consumption ratio and compared by diffraction efficiency of track direction. Finally, we define suitable dynamic range for MDSS.