• Title/Summary/Keyword: High-capacity

Search Result 8,087, Processing Time 0.036 seconds

Reinforcement for Bearing Capacity of PRD Steel Pile at Mudstone Area (이암지역에 근입된 PRD강관말뚝의 지지력 보강)

  • Kong, Jin-Young;Kang, Hee-Jin;Chun, Byung-Sik
    • Proceedings of the KSR Conference
    • /
    • 2007.05a
    • /
    • pp.1760-1769
    • /
    • 2007
  • The cut slope sliding which has been frequently encountered in Pohang area has been reported due to the rapid reduction of shear strength in mudstone after being exposed to the air. Mudstone has characteristics that it has high enough strength and stiffness in a dry condition, but the strength and stiffness decrease in a wet condition with groundwater infiltration. The case study in this paper shows that mudstone which had enough strength in a boring stage has lost the strength after installing PRD steel pipe pile inducing an insufficient bearing capacity, which has been ascertained by the static load test. Test construction has been performed to investigate the most favorable method for increasing a pile bearing capacity in mudstone with various methods such as MSG (Micro Silica Grouting) around the tip and side of a pile, the perimeter grouting combined with Micro pile reinforcement, and concrete filling after tip reinforcing grouting. From the test construction, MSG has been turned out to be the most favorable method for increasing a pile bearing capacity in mudstone, which has been confirmed by the static load test.

  • PDF

Implementation of Finite Capacity-Driven MRP-C System (한정된 제조자원능력을 고려한 MRP-C 시스템 적용)

  • 김동규;박재현;강경식
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.22 no.51
    • /
    • pp.117-127
    • /
    • 1999
  • Modern production control systems based on MRPⅡ (Manufacturing Resource planning) didn't solved about the capacity and lead time problems. In the past, It solved that problems under deterministic. Therefore, the problem about determination of correct lead time and finite capacity are studied continuously by researchers. Now, we need to a integrated method that is from low level to high level instead of top-down in MRP. In this research uses the MRP-C(Capacitated Material Requirement Planning) concept that is more efficient then MRP system for capacity and flexible lead time , and shows the MRP-C algorithm and the prototype.

  • PDF

Load-Carrying Capacity Assessment of Deteriorated Rural Bridge

  • Kim, Han-Joong;Kim, Jong-Ok;Yang, Seung-Ie
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.44 no.7
    • /
    • pp.36-45
    • /
    • 2002
  • Most of rural bridges have passed 30 years of age since they were built, which have to support unexpected overload caused by changed design load and excessive amount of transportation. For these rural bridges, repairs and replacements are needed. Even though there have been attempt to estimate the safety of existing bridges deteriorated with major defects, those approaches must rely on the observable damage and subsequent decisions are made subjectively. To avoid the high cost of rehabilitation, the bridge rating must correctly represent the present load-carrying capacity. Rating engineers use a methods such as Allowable Stress Design (ASD), Load Factor Design (LFD), and Load Resistance Factor Design (LRFD) to evaluate the bridge load carrying capacity. In this paper, the load rating methods are introduced, and it is illustrated how to use the load test data from literature survey. Load test is conducted to the bridge that was built 30 years ago in rural area. From load test results, new maintenance method is suggested instead of the bridge replacement.

Effects of Oil and Sugar on SPI-Tofu Characteristics Under Model System (모델시스템에서 기름과 당이 분리대두단백 두부의 특성에 미치는 영향)

  • 김동원;구경형;최희숙;김우정
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.23 no.1
    • /
    • pp.90-97
    • /
    • 1994
  • Effect of addition of oil , sucrose, dextrin and oil-sucrose (1 : 1 w/w) mixture on SPI tofu was investigated. The characteristics measured were yield , water holding capacity , textural and organoleptic properties. THe SPI tofufwas prepared by coagulation of soyprotein isolate (SP) suspensino by CaCl$_2$ , CaSo$_4$ an dGDL , followed by compression . Addition of oil to SPI increased the tofu yield and water holding capacity, particulary for those tofu coagulated by CaCl$_2$. Eventhough dextrin addition decreased the yield, it showed the most improving effect on water holding capacity. The tofu prepared by CaSO$_4$coagulant resulted highest in yield and water holding capacity. Hardness was found to be decreased as the oil, sucrose and dextrin added more and adhesiveness, cohesiveness and guminess were also affected. The sensory evaluation showed the SPI tofu prepared by CaSO$_4$ and 10% addition of oil and sucrose mixture to be realtively high in hardness , elasticity and uniformity of the texture.

  • PDF

A Study of Children's Comprehension Monitoring Ability: Monitoring Standards Preference and Relationship with Working Memory Capacity (아동의 이해점검 능력에 관한 연구 : 점검기준의 사용과 작업기억 용량과의 관계에서)

  • Song, Young Joo
    • Korean Journal of Child Studies
    • /
    • v.19 no.1
    • /
    • pp.117-129
    • /
    • 1998
  • This study was designed to examine children's comprehension monitoring ability. Specifically the purpose of this study was to investigate (1) children's monitoring standards preference according to monitoring ability, and (2) the relationships between comprehension monitoring and working memory capacity. The subjects were 60 children, 30 each in 2nd and 4th grades. To measure comprehension monitoring ability, 7 stories including erroneous sentences were used. Working memory capacity was measured by the Reading Span Test (Lee, 1995). Results showed that (1) the high and low monitoring children were not different in monitoring standard preference, and (2) comprehension monitoring ability was significantly and positively related to working memory capacity.

  • PDF

A Study on the Strength Capacity and the Strengthening Effects of Steel Reinforced Concrete(SRC) Beams with Carbon Fiber Sheets (CFS) and Glass Fiber Sheets (GFS) (탄소섬유 및 유리섬유로 보강한 합성보의 내력산정과 보강효과에 대한연구)

  • 김희규;신영수;최완철;홍영균
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1997.04a
    • /
    • pp.565-570
    • /
    • 1997
  • This study is on the strength capacity and the strengthening effects of crarbon fiber sheets(CFS) and glass fiber sheets (GFS) on steel reinforced concrete(SRC) beams. SRC beams are often used on high-rise building construction to save story height and construction cost. However, there are no strengthening design code in Korea and most engineers design it as steel beams ignored the composite effect if reinforced concrete. Test results on steel reinforced concrete beams reveal thar the strength capacity of SRC beam is more than simple addition of steel and reinforced concrete beams. In case of steel reinforced concrete beams, ultimate moment capacity of strengthening beam of carbon fiber sheets is 120% of non-strengthening one.

  • PDF

Capacity Analysis of Smart Antenna Systems with Macro Diversity (스마트 안테나를 적용한 기지국 다이버시티에 의한 셀의 용량분석 연구)

  • 이명원;한진규;육종관;박한규
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.3B
    • /
    • pp.212-219
    • /
    • 2002
  • In this paper, how to perform beamforming and power control for the systems with smart antennas is introduced in consideration of macro-diversity, and cell capacity of the systems is analyzed. In the result, as the number of the base stations linked to mobiles increases, capacity increases in the reverse link. On the other hand, macro diversity causes capacity loss in forward link. It is expected that the result of this work may be used in designing the next generation mobile communication systems for high quality services such as multi media data and wireless internet etc.

-Development on the Integrated System of PES and LCS and Sensitivity Analysis for Line Capacity- (선로용량 계산 통합프로그램 및 민감도분석체계 개발)

  • Im Chan-Sik;Kim Han-Sin;Lee Chang-Ho;Kim Bong-Seon;Kim Dong-Hui;Hong Seun-Heum
    • Proceedings of the Safety Management and Science Conference
    • /
    • 2004.11a
    • /
    • pp.213-220
    • /
    • 2004
  • A purpose of this research is building a Parameter Evaluation Simulation(PES) program which is present proper parameter value to calculate line capacity. This research performs a detailed simulation and a analysis of it using PES and it is developed on the basis of Line Capacity Simulation model. Chosen simulation sectors are that happened a big change of a line capacity because of joining a high speed train(KTX). Moreover this research performs a sensitivity analysis when basic data are changed.

  • PDF

A High Quality Steganographic Method Using Morphing

  • Bagade, Anant M.;Talbar, Sanjay N.
    • Journal of Information Processing Systems
    • /
    • v.10 no.2
    • /
    • pp.256-270
    • /
    • 2014
  • A new morphed steganographic algorithm is proposed in this paper. Image security is a challenging problem these days. Steganography is a method of hiding secret data in cover media. The Least Significant Bit is a standard Steganographic method that has some limitations. The limitations are less capacity to hide data, poor stego image quality, and imperceptibility. The proposed algorithm focuses on these limitations. The morphing concept is being used for image steganography to overcome these limitations. The PSNR and standard deviation are considered as a measure to improve stego image quality and morphed image selection, respectively. The stego keys are generated during the morphed steganographic embedding and extracting process. Stego keys are used to embed and extract the secret image. The experimental results, which are based on hiding capacity and PSNR, are presented in this paper. Our research contributes towards creating an improved steganographic method using image morphing. The experimental result indicates that the proposed algorithm achieves an increase in hiding capacity, stego image quality, and imperceptibility. The experimental results were compared with state of the art steganographic methods.

Absorptive Capacity Effects of Foreign Direct Investment in Selected Asian Economies

  • ROY, Samrat
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.11
    • /
    • pp.31-39
    • /
    • 2021
  • This study empirically examines the proposition that the domestic fundamentals of a nation can emerge as absorptive capacity factors to reap the benefits of inward FDI. The study is contextualized in Asia, set from1982 to 2017, and data is grouped into low-income and lower-middle-income economies, in comparison to high-income and upper-middle-income economies, catering to different geographical regions within Asia. The investigation is based on a series of absorptive capacity factors such as infrastructure, human capital, domestic credit, and health indicator. The methodological analysis is premised on dynamic panel structure and employs the Generalized Method of Moments (GMM) estimation technique. The empirical findings suggest that that the infrastructure variable appears to be the major absorptive capacity factor for both groups of countries. The health indicator, on the other hand, can help reap the benefits of inward FDI, but only if the threshold level is met. The selected economies must achieve this threshold level to reap the benefits of FDI. To absorb the benefits of inward FDI, countries must be proactive in providing sound infrastructure and implementing proper healthcare measures.