• Journal of Korean Association for Spatial Structures
• /
• v.15 no.2
• /
• pp.95-103
• /
• 2015

UHPC(Ultra High Performance Concrete) is used widely with its remarkable performance, such as strength, ductility and durability. Since the fibers in the UHPC can control the tensile crack, the punching shear capacity of UHPC is higher than that of the conventional concrete. In this paper, seven slabs with different thickness and fiber volume ratio were tested. The ultimate punching shear strength was increased with the fiber volume ratio up to 1%. The shear capacity of specimens with the fiber content 1% and 1.5% do not have big differences. The thicker slab has higher punching shear strength and lower deformation capacity. The critical sections of punching shear failure were similar regardless of the fiber volume ratio, but it were larger in thicker slab.

• Research in Mathematical Education
• /
• v.13 no.3
• /
• pp.181-195
• /
• 2009

Students' approaches to mathematical problem solving vary greatly with each other. The main objective of the current study was to compare students' performance with different thinking styles (divergent vs. convergent) and working memory capacity upon mathematical problem solving. A sample of 150 high school girls, ages 15 to 16, was studied based on Hudson's test and Digit Span Backwards test as well as a math exam. The results indicated that the effect of thinking styles and working memory on students' performance in problem solving was significant. Moreover, students with divergent thinking style and high working memory capacity showed higher performance than ones with convergent thinking style. The implications of these results on math teaching and problem solving emphasizes that cognitive predictor variable (Convergent/Divergent) and working memory, in particular could be challenging and a rather distinctive factor for students.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.722-726
• /
• 2005

The use of isolated wine yeasts in winemaking processes is preferable to spontaneous fermentation. Selection criteria of wine yeast strains depend also on capacity and rate of fermentation and on alcohologenic capabilities. Our studies have described the dynamics of fermentation of wine musts by some isolated wine yeast strains of Saccharomyces genus: strains 6 and 8 of S. cerevisiae var. ellipsoideus (S. ellipsoideus) and strains 5 and 7 of S. bayanus var. oviformis (S. oviformis). All have high technological properties and all are adapted for the specific pedoclimatic conditions of some areas of Sibiu viticultural region. The selected strains were used as inocula to ferment Sauvignon, Muscat Ottonel, Rose Traminer, and Pino Gris musts in controlled laboratory conditions. It was found that higher initial oxygen concentration in must is necessary to accelerate the fermentation of all the wine yeast strains studied. In order to obtain quality wines, strains with considerable fermentative capacity, high alcohologenic capabilities, and a good conversion efficiency are recommended.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.83-86
• /
• 2005

This paper proposed a hydraulic pump system which uses a variable SR drive and constant capacity pump. The base and maximum speed, torque are determined from displacement capacity of the pump and maximum pressure. The drive system is set to have a minimum power consumption having hydraulic preset pressure, which is operated within a maximum capacity and maximum preset pressure. This is achieved by controlling motor speed and power with feedback signal of pressure of the hydraulic pump. A 2.2kw, 12/8-pole SR motor and DSP based digital controller are designed and prototype drive system is manufactured. The proposed variable speed SR drive system is simulated and tested with experimental set-up. The test results show that the system has some good features such as high efficiency and high response characteristics.

• Structural Engineering and Mechanics
• /
• v.52 no.5
• /
• pp.857-873
• /
• 2014

Structural behaviors of a sustainable hybrid column with the ultra high performance cementitious composites (UHPCC) permanent form under compression and flexure were studied. Critical state and failure stage characters are analyzed for large and small eccentricity cases. A simplified theoretical model is proposed for engineering designs and unified formulas for loading capacity of the hybrid column under compression and flexure loads are derived, including axial force and moment. Non-linear numerical analysis is carried out to verify the theoretical predictions. The theoretical predictions agree well with the numerical results which are verified by the short hybrid column tests recursively. Compared with the traditional reinforced concrete (RC) column, the loading capacity of the sustainable hybrid column is improved significantly due to UHPCC confinements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.8
• /
• pp.132-139
• /
• 2011

Technical requirements for medium voltage class circuit breaker were harmonized by IEC and IEEE, and IEC newly adopted the requirements for class S2 circuit-breaker for overhead-line with the ratings of high-frequency TRV(Transient Recovery Voltage), which IEEE already adopted. Under these circumstances, KERI(Korea Electrotechnology Research Institute) studied testing technologies and facilities, which enable to perform interrupting capacity tests for class S2 circuit-breaker. As results, KERI could carry out interrupting capacity tests for medium voltage class circuit breaker rated up to 3-phase 52[kV] 40[kA], which satisfies the IEC standard.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.59-66
• /
• 2018

Data Distribution Service(DDS) provides the communications service programmers need to distribute time-critical data between embedded and/or enterprise devices or nodes. In this paper, I propose efficient methods for transmitting and receiving messages of various characteristics in real-time using DDS middleware. For high-frequency characteristic data, I describe several DDS packet types and various default and extended DDS QoS policies. In particular, the batching method is probably the best solution when considering several performance aspects. For large-capacity characteristic data. I will show a method using extended DDS QoS policies, a segmentation and reassembly method, and transmitting and receiving a large-capacity data with low priority method considering network conditions. Finally, I simulate and compare the result of performance for each methods. This results will help determine efficient methods for transmitting and receiving messages of various characteristics using DDS middleware.

• Journal of Hydrogen and New Energy
• /
• v.32 no.6
• /
• pp.612-617
• /
• 2021

In the case of a metal sulfide electrode, it is used as an anode or cathode active material in a lithium battery. The reason is that the voltage exists between 0.8 and 2.0 V via lithium electrode and the discharge and charge capacity is high. In order to manufacture nickel sulfide for electrode, which are widely used, nano-nickel powder was sulfided using ammonium polysulfide, and single-phase NiS electrodes were manufactured through heat treatment. The prepared NiS electrode had a high initial capacity of 500 mAh/g or more, and was stabilized after 20 cycles to maintain a capacity of 400 mAh/g or more until 100 cycles.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.32-53
• /
• 2022

Although lithium-ion batteries are currently the most reliable power supply system for various mobile applications, further improvement in energy density is still required as the need for batteries in large energy-consuming devices is rapidly growing. However, in the anode, the most widely commercialized graphite-based anode materials almost face theoretical limitations. In addition, sodium-ion batteries have been actively studied to replace expensive charge carriers with cheaper ones. Accordingly, conversion-based materials have been extensively studied as high-capacity anode materials in both lithiumion batteries and sodium-ion batteries because their theoretical capacity is twice or thrice higher than that of insertion-based materials. This review will provide a comprehensive understanding of conversion-based materials, including basic charge storage behaviors, critical drawbacks that should be overcome, and practical material design for high-performance.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.339-346
• /
• 2022

Silicon (Si) has attracted considerable attention due to its high theoretical capacity compared to conventional graphite anode materials. However, Si-based anode materials suffer from rapid capacity loss due to mechanical failure caused by large volume change during cycling. To alleviate this phenomenon, crosslinked polymeric binders with strong interactions are highly desirable to ensure the electrode integrity. In this study, thermally crosslinked polyimide binders were used for Si-alloy anodes in Li-ion batteries. The crosslinked polyimide binder was found to have high adhesion strength, resulting in enhanced electrode integrity during cycling. Therefore, the Si-alloy anodes with crosslinked polyimide binder provide enhanced electrochemical performance, such as Coulombic efficiency, capacity retention, and cycle stability.