• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.13-21
• /
• 1998

Based on the escape cone concepts, high-brightness light-emitting diodes (LEDs) have been analyzed. In AlGaAs or InGaAlP LEDs, photon absorption in the ohmic region under the electrode is known to be significant. Thus, ins general, a thick window layer (WL) and a transparent substrate (TS) would minimize photon shielding by the electrodes and considerably improve photon output coupling efficiency. However, the schemes do not seem to be necessary in InGaN system. Photon absorption in ohmic contact to a wide bandgap semiconductor such as GaN may be negligible and, as a result, the significant photon shielding by the electrodes will not degrade the photon output coupling efficiency so much. The photon output coupling efficiency estimated in InGaN LEDs is about 2.5 - 2.8 times that of the conventional high-brightness LED structures based on both WL and TS schemes. As a result, the extenal quantum efficiency in InGaN LEDs is as high as 9% despite the presumably very low internal quantum efficiency.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.243-247
• /
• 2009

A Radioactive constraint of the nuclear fuel assembly irradiated by neutron during normal operation cycle of the nuclear power plant is typically on the order of about 3 kGy/h. In order to inspect nuclear fuel assembly using a VT (vision technology) system, the light such as halogen lamp is used. As the halogen lamp has lower color temperature than the sun light, the objects under halogen lamp illumination are seemed to be tinted with red. In this paper, high brightness LED is considered to be used as the light source of VT system. The high brightness LED, which is a key light source of the VT system, have been gamma irradiated at the dose rate of 4 kGy/h during two hours up to a total dose of 8 kGy. The radiation induced color-center in the LED housing cap made of plastics materials is observed.

• 디지털융복합연구
• /
• 제12권4호
• /
• pp.311-318
• /
• 2014

본 논문은 의료영상시스템, 공장자동화 시스템에서 핵심기술인 정확한 검사와 계측을 위하여 보다 선명하고 안정정인 환경을 제공하기 위한 조명으로 고휘도 LED를 이용한 조명광원의 제어기를 개발하였다. 고휘도 LED 전용드라이버를 장착하여 정전류 방식으로 안정된 전원을 공급하도록 설계하고, 32비트 ARM 프로세서 코어를 사용하여 화상처리 시 필수적인 요소인 광량을 256단계로 나누어 리모트 컨트롤 및 외부 인터페이스가 가능하도록 하여 볼륨의 저항 값 오차로 인하여 발생되는 밝기 값의 부정확을 방지하고 디지털화함으로써 빛의 재현성을 개선하였다. 아나로그 전원에 비하여 조광 범위가 넓고 낮은 레벨에서도 조광이 가능하도록 설계 하였으며 또한 RS-485 통신기능을 추가하여 외부장치로부터 데이터를 받아 사용자가 광량조절 및 ON/OFF 제어가 가능하도록 개발 하였다.

• 방송공학회논문지
• /
• 제23권2호
• /
• pp.283-292
• /
• 2018

LDR (low dynamic range) 영상에 비해서 밝기 범위가 크게 늘어난 HDR (high dynamic range) 영상을 촬영할 수 있는 장비와 디스플레이할 수 있는 기기들이 개발되고 있고 영상의 밝기 범위를 효율적으로 변환하는 방법에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 LDR 영상을 HDR 영상으로 효율적으로 변환하기 위해서 guided filter를 사용한 reverse tone mapping 기법을 제안한다. Guided filter를 사용하여 한 장의 LDR 영상으로부터 BEF(brightness enhancement function)을 구한 후에 LDR 영상에서 밝기가 포화된 부분을 효율적으로 복원하여 HDR 영상을 생성하는 기법을 제안한다. 또한 영상이 지나치게 밝거나 어두운 경우 영상 촬영시의 노출 값을 추정하여 보정한 후에 밝기 범위를 변환하는 방법을 이용하여 생성되는 HDR 영상의 화질을 극대화하는 방법을 연구하고 모의 실험 결과로부터 제안하는 기법은 기존의 방법에 비해서 우수한 화질의 HDR 영상을 생성하는 것을 입증한다.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.68-72
• /
• 2008

AlGaInP high-brightness LEDs(HB-LEDs) have gained importance a variety of application operating in the red, orange, yellow and yellow-green wavelength. The light generated from inside LED chips should be emitted to the air through the surfaces of the chips. However, because of the differences between the semiconductor and air or epoxy's refractive index, some of the light was blocked so that caused lowering external quantum efficiency. In this study, nano-scale roughness on the top-GaP layer of AlGaInP epitaxial wafer was fabricated to improve' the brightness of AlGaInP LEDs. Nano-scale roughness was made by ICP dry etcher. Our AlGaInP LEDs with nano-scale roughness has higher brightness (about 28.5 %) than standard AlGaInP LEDs.

• 펄프종이기술
• /
• 제34권3호
• /
• pp.46-52
• /
• 2002

To produce the raw material used for printing and writing paper or high quality tissue, MOWs that were consisted of white ledger, colored ledger and old newspaper were bleached with EoP and EoPY(FAS) method, the EoP bleaching process gave the improvement in brightness and a high color removal efficiency. Especially, MOW B(initial brightness: 59.1％ ISO) that contained much old newspaper showed the higher bleaching efficiency than those of MOW A(initial brightness: 68.3%). After EoPY(FAS) bleaching, MOW's brightness was increased from 68.3% ISO to 84.3∼84.0% ISO, and from 59.1% ISO to 78.7∼79.2% ISO, respectively. Also the tensile and burst index of bleached pulps decreased by 10∼30%. The tear index slightly decreased or halted at the same range as unbleached pulps.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.64-67
• /
• 2004

In this paper, to discover the brightness improvement of ZnS:Cu powder electroluminescence (EL), a new structure is proposed in which phosphor and dielectric are mixed between electrodes. Dielectric and phosphor material are BaTiO$_3$ and ZnS:Cu, respectively. The effect of the mixed layer on EL sample is considered the improvement of source efficiency. Although the number of electrons introduced into the phosphor increases only modestly, the high electric field region of phosphor grains increases comparatively in the characteristics of brightness-voltage. Furthermore, the relaxation occurs through leading and trailing edge pairs, which is relatively efficient in characteristics of decay time. With these results, we found that the brightness of newly proposed ZnS:Cu powder electroluminescence was 167.24 cd/$m^2$ at ac voltage of 100V and frequency of 400Hz.

• 전력전자학회논문지
• /
• 제11권6호
• /
• pp.502-507
• /
• 2006

LCD의 대형화에 따라 백라이트용 냉음극 방전램프(Cold Cathode Fluorescent Lamp)는 길어지고 있으며, 하나의 램프를 이용한 백라이트는 휘도의 한계가 있어 대형 디스플레이에서는 여러 개의 램프를 사용하여 필요한 휘도를 만들고 있다. 본 논문에서는 냉음극 방전램프 20개를 사용하는 42인치 LCD TV용 대형 백라이트 구동을 위한 인버터를 각각의 램프들이 입력조건에 대해 동일한 출력을 갖도록 설계하였다. 기존의 냉음극 방전램프의 구동방식인 하이-로우(H-L) 방식에서의 문제점을 보완하여 하이-하이(H-H) 방식을 채택하여 램프 좌우측의 휘도 차이를 개선하였다. 또한 램프간의 휘도 편차를 개선하기 위해 램프와 직렬로 커패시터를 연결하는 방식을 사용하였다. 제안된 시스템을 실험을 통해 검증하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1233-1235
• /
• 2004

We have designed High Performance Prism LGP in 17 inch TFT-LCD. In test result to embody high brightness BLU in case of LGP of base and upper surface with 17 inch, thickness 8mm adding prism construct, it is superior brightness improvement than previous that of printing form about some 20% and in this course to embody actual material it succeeded prism LGP production by 17 inch injection form process.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권2호
• /
• pp.98-104
• /
• 2003

This paper proposes the design of a multi-color lamp using high brightness RGB LEDs for color variation. Appropriate number of RGB LEDs is so chosen according to the color mixing theory that the overall LEDs represent a color temperature of 6500K. Also, the chosen RGB LEDs are suitably arranged by using an optical design program. The lamp has an internal controller circuit, so it can be directly connected to the existing incandescent lamp socket. It's main body is comprised of two PCB layers. The upper layer contains 44 LEDs and the lower one has a simple microcontroller-based PWM control circuit. The lamp has functions of both ON/OFF control and PWM control, and enables color variation of over 100,000 colors and of more than 10 patterns.