• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.34.1-34.1
• /
• 2009

A great deal of attention has been focused on ZnO nanowires for various electronics and optoelectronics applications. in the pursuit of next generation nanodevices, it would be highly preferred if well-ordered ZnO nanowires of lower dimension could be fabricated on silicon. Before the growth of nanowires, silicon substrates were selectively etched using silicon nitride as masking layer. Vertical aligned ZnO nanowires were grown by metal organic chemical vapor deposition on patterned silicon substrate. The shape of nanostructures was greatly influenced by the micropatterned surface of the substrate. The aspect ratio, packing fraction and the number density of nanowires on top surface are around 10, 0.8 and $10^7\;per\;mm^2$, respectively, whereas the values are 20, 0.3 and $5\times10^7\;per\;mm^2$, respectively, towards the bottom of the cavity. XRD patterns suggest that the nanostructures have good crystallinity. High-resolution transmission electron microscopy confirmed the single crystalline growth of the ZnO nanowires along [0001] direction.

• 한국광학회지
• /
• 제20권2호
• /
• pp.81-86
• /
• 2009

디지털 홀로그램과 굴절률 차이를 이용하여 사용된 광원의 파장보다 큰 단차를 측정하는 연구를 하였다. 위상차를 측정하여 단차를 측정하는 방식에서는 위상차가 $2{\pi}$보다 큰 경우에는 원리상 단차를 구하기 어렵다. 이를 보완하기 위하여 굴절률 차이를 이용하여 인위적으로 광경로차를 줄여 파장보다 큰 단차를 측정할 수 있는 디지털 홀로그래피 시스템을 구성하였고, 실험적으로 파장의 약 3배 이상의 단차를 측정하였다.

• 한국작물학회지
• /
• 제50권1호
• /
• pp.45-54
• /
• 2005

This study was carried out to investigate the patterns of dry matter (DM) production and accumulation, and to screen the relationships between related major growth characters and DM accumulation in four cassava varieties in Bogor $(6^{\circ}19'-6^{\circ}47'S,\;106^{\circ}21'-107^{\circ}13'E)$, West Java, Indonesia. Gading and Adiral developed an enough source and canopy in short at the early growth phase and then translocated assimilates to storage roots with a higher partitioning rate, even these varieties were considered as early-bulking varieties, which have superior source and sink potentials in increasing yield and DM of tubers. The root/shoot ratio (R/SR), total dry weight (TDW), leaf area duration, leaf area index (LAI), and number of tubers showed higher positive correlations with the dry weight of roots (DWR), and the direct effects of TDW, R/SR, and LAI on the DWR were higher. These characters were considered to be useful target characters to screen cassava varieties with high yield potential and high DM in aspect of tuber production.

• Steel and Composite Structures
• /
• 제43권2호
• /
• pp.139-152
• /
• 2022

Steel-reinforced concrete (SRC) L-shaped column is the vertical load-bearing member with high spatial adaptability. The seismic behavior of SRC L-shaped column is complex because of their irregular cross sections. In this study, the hysteretic performance of six steel truss reinforced concrete L-shaped columns specimens under the combined loading of compression, bending, shear, and torsion was tested. There were two parameters, i.e., the moment ratio of torsion to bending (γ) and the aspect ratio (column length-to-depth ratio (φ)). The failure process, torsion-displacement hysteresis curves, and bending-displacement hysteresis curves of specimens were obtained, and the failure patterns, hysteresis curves, rigidity degradation, ductility, and energy dissipation were analyzed. The experimental research indicates that the failure mode of the specimen changes from bending failure to bending-shear failure and finally bending-torsion failure with the increase of γ. The torsion-displacement hysteresis curves were pinched in the middle, formed a slip platform, and the phenomenon of "load drop" occurred after the peak load. The bending-displacement hysteresis curves were plump, which shows that the bending capacity of the specimen is better than torsion capacity. The results show that the steel truss reinforced concrete L-shaped columns have good collapse resistance, and the ultimate interstory drift ratio more than that of the Chinese Code of Seismic Design of Building (GB50011-2014), which is sufficient. The average value of displacement ductility coefficient is larger than rotation angle ductility coefficient, indicating that the specimen has a better bending deformation resistance. The specimen that has a more regular section with a small φ has better potential to bear bending moment and torsion evenly and consume more energy under a combined action.

• Computers and Concrete
• /
• 제25권3호
• /
• pp.215-224
• /
• 2020

In the present study, according to the important of porosity in low specific weight in comparison of high stiffness of carbon nanotubes reinforced composite, buckling and free vibration analysis of sandwich composite beam in two configurations, of laminates using differential quadrature method (DQM) is studied. Also, the effects of porosity coefficient and three types of porosity distribution on critical buckling load and natural frequency are discussed. It is shown the buckling loads and natural frequencies of laminate 1 are significantly larger than the results of laminate 2. When configuration 2 (the core is made of FRC) and laminate 1 ([0/90/0/45/90]_s) are used, the first natural frequency rises noticeably. It is also demonstrated that the influence of the core height in the case of lower carbon volume fractions is negligible. Even though, when volume fraction of fiber increases, the critical buckling load enhances smoothly. It should be noticed the amount of decline has inverse relationship with the beam aspect ratio. Investigating three porosity patterns, beam with the distribution of porosity Type 2 has the maximum critical buckling load and first natural frequency. Among three elastic foundations (constant, linear and parabolic), buckling load and natural frequency in linear variation has the least amount. For all kind of elastic foundations, when the porosity coefficient increases, critical buckling load and natural frequency decline significantly.

• 공업화학
• /
• 제27권5호
• /
• pp.543-545
• /
• 2016

본 연구에서는 용매열합성법을 이용하여 용액의 서로 다른 pH와 용매 조건에서 4종의 수산화인회석을 합성하였다. 합성된 샘플의 결정성과 형태를 X-선 회절 분석과, 투과형전자현미경을 통하여 분석하였다. 4종의 수산화인회석은 pH와 용매 조건에 관계없이 거의 유사한 형태의 XRD 패턴을 보여 주었다. 그러나 형태는 순수한 물을 용매를 사용하였을 경우 염기 조건에서 합성한 수산화인회석이 [001] 방향으로 결정이 성장한 형태를 보였으며, 또한 순수한 물에 메탄올과 에탄올이 첨가한 조건에서 합성한 수산화인회석은 [001] 방향으로 더욱더 결정이 성장한 형태를 보였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.364-367
• /
• 2007

In nano-imprint lithography (NIL) process, which has shown to be a good method to fabricate polymeric patterns, several kinds of pattern defects due to thermal effects during polymer flow and mold release operation have been reported. A typical defect in NIL process with high aspect ratio and low resist thickness pattern is a resist fracture during the mold release operation. It seems due to interfacial adhesion between polymer and mold. However, in the present investigation, FEM simulation of NIL molding process was carried out to predict the defects of the polymer pattern and to optimize the process by FEA. The embossing operation in NIL process was investigated in detail by FEM. From the analytical results, it was found that the lateral flow of polymer resin and the applied pressure in the embossing operation induce the weld line and the drastic lateral strain at the edge of pattern. It was also shown that the low polymer-thickness result in the delamination of polymer from the substrate. It seems that the above phenomena cause the defects of the final polymer pattern. To reduce the defect, it is important to check the initial resin thickness.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.143-149
• /
• 2008

A numerical study was performed for a vane of a compressor with a high-turning angle and meridional divergence. At first, the effect of the suction position was discussed. Then, the optimal suction position was applied to the cascades with the aspect ratio of 2.53 and 0.3, respectively, to get the knowledge of the effect of the endwall boundary layer removal on the secondary flow along the blade height. At last, using the critical principles of the three-dimensional separation, the topological structures of the flow patterns of the body surfaces and the separation configurations were discussed in detail. The results show that the largest reduction of the total loss can be achieved when the suction slot is near the suction side. The topological structure as well as the separation configuration varies due to boundary layer removal, which restrains the flow separation at the corner and delays or depresses the separation on the suction surface. Compared with the original cascade, the cascade with the endwall boundary layer removal has a higher blade loading along the most span. Furthermore the flow loss decreases and distributes uniformly along the span.

• 한국광물학회지
• /
• 제23권1호
• /
• pp.73-84
• /
• 2010

국내에서 투각섬석 석면이 채굴되었던 충남 보령지역의 석연광산인 중앙(신석)광산과 대보석산 광산에 대해서 투각섬석의 산출상태, 수반광물, 광물학적 특성, 형성과정을 연구하였다. 이곳의 투각섬석은 아주 긴 섬유상과 함께 침상, 도변상, 주상의 여러 형태가 같이 공존하였다. 유해석변의 기준에 해당되는 투각섬석에 대해 편광현미경과 주사전자현미경으로 형태를 분석한 결과, 길이가 최대 210 ${\mu}m$에 해당되는 입자도 있으나 평균치로는 31.2 ${\mu}m$이고, 폭은 평균 1.6 ${\mu}m$이며 종횡비는 평균 19.9이었다. 투각섬석의 신장방향에 대한 소광각은 6.1~20.2$^{\circ}$의 범위로 모두 사소광의 성질을 나타냈다. 석면상과 비석면상 투각섬석의 XRD 패턴도 약간의 차이를 나타냈다. EPMA의 분석 결과, 이곳의 투각섬석은 Mg성분이 Fe보다 월등히 높게 나타나서 Mg단종인 투각섬석에 가까운 것으로 확인되었다. 석면상과 주상의 투각섬석은 형성조건이 다소 다르며 석면상이 후기에 형성된 것으로 검토되였다.

• 한국표면공학회지
• /
• 제46권3호
• /
• pp.99-104
• /
• 2013

The simple and cost-effective microfabrication method of photosensitive glass (PSG) using metal patterning and blank exposure was proposed. Conventional photolithography for micromachining of PSG needs a costly quartz mask which has high transmittance as an optical property. However, in this study the process was improved through the combination of micro-patterned Ti thin film and blank UV exposure without quartz mask. The effect of UV exposure time as well as the DHF etching condition was investigated. UV exposure test was performed within the range from 3 min to 9 min. The color and etch result of PSG exposed for 5 min were the most clear and effective to etch more precisely, respectively. The etching results of PSG in diluted hydrofluoric acid (DHF) with a concentration of 5, 10, 15 vol% were compared. The effect on the side etch was insignificant while the etch rate was proportional as the concentration increased. 10 vol% DHF results not only high etch rate of 75 ${\mu}m/min$ also lower side etch value after PSG etching. This method facilitates the microfabrication of PSG with various patterns and high aspect ratio for applying to advanced applications.