• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.64-69
• /
• 1992

Bi-Sr-Ca-Cu-O superconducting system have the low and high Tc phases. In order to get the superconductor above crtitical temperature 100K, we added with Pb and sintered for a long time about 200 hrs. In this study, the influence of superconducting characteristics on the Bi(Pb)SrCaCuO system characteristics on the Bi(Pb)SrCaCuO system dopped Sb was investigate too. Adding Sb of 0.1 mol, the sintering time is short than that dopped Pb only. We could get the critical temperature 102 K at sintered for 24 hrs and 109 K for 210 hrs.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.05a
• /
• pp.19-20
• /
• 1991

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.4
• /
• pp.186-189
• /
• 2005

We have fabricated superconducting HTSC ceramic thick films by chemical process. c-axis oriented HTSC thick films have been attempted bi-axially textured Ni tapes. The x-ray diffraction pattern of the HTSC thick films contained superconducting phase crystal. The critical temperature and critical current density was 110K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.324-327
• /
• 1995

In this research, FEM solution to analysis near field of high Tc superconductor microstrip antenna is presented. This method uses the interpolation function with vector edge triangular element. The advantage of this element is elimination of spurious solutions which are attributed to the lack of enforcement of the divergence condition. The solutions of this method will be used to have a good fundamental data for next reaserch about analysis of HTS microstrip array antenna etc.

• Progress in Superconductivity
• /
• v.10 no.1
• /
• pp.17-22
• /
• 2008

We have examined the effect of ball-milling on the superconducting properties of $MgB_2$ doped with C. The ball-milling of pre-reacted $MgB_2$ powder was carried out in dry or wet state using C or diethylenetriamine ($C_{4}H_{13}N_3$) as additives. The diethylenetriamine, whose chemical formula contains no oxygen, was chosen to avoid an excess oxidation during doping. The superconducting transition temperature (Tc) of the ball-milled or doped $MgB_2$ powders was only slightly smaller than that of undoped $MgB_2$. The critical current density (Jc) of the highly ball-milled $MgB_2$ was higher than that of C-doped $MgB_2$. The addition of diethylenetriamine was detrimental to Jc, although Tc was almost unchanged.

• Electrical & Electronic Materials
• /
• v.3 no.3
• /
• pp.215-223
• /
• 1990

Y-Ba-Cu-O계 고온 초전도체를 소결, 소결+HIP encapsulation방법으로 각각 제작하였다. 소결은 900.deg.C~960.deg.C에서 하였으며 소결시편의 일부는 HIP처리 하였는데 이때 HIP조건은 150MPa Ar압력에서 800.deg.C, 30min이었다. HIP시편의 상대밀도는 90%~93%의 밀도를 갖는 소결시편보다 5%~8% 증가하였다. 열처리 조건에 따른 x-ray 회절분석은 사방정-정방정 상변태를 보여주었다. 임계온도(Tc)는 91.deg.k 에서 전기비정항이 급격히 감소하기 시작하여 89.deg.k에서 완전히 0이 되었으며 전이폭은 3.deg.k내로 매우 좁았다. 임계전류밀도(Jc)는 소결시편의 경우 전형적인 ~159A/$cm^{2}$의 값을 보였으나 HIP처리 후 ~89A/$cm^{2}$로 감소했기 때문이라 생각하였다. 경도와 인성은 각각 38GPa과 2.9MPam$^{1}$2/로 증가하였다.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.83-89
• /
• 1995

YBa2Cu3O7-$\delta$, Y2BaCuO5, and binary compounds in the Ba-Cu-O system with the nominal composition of Ba2CuO3, BaCuO2, Ba3Cu4O7, Ba3Cu5O8 were synthesized to investigate the heat evolutions and crystalline phases in the hydration reaction of orthorhombic YBa2Cu3O7-$\delta$ phase. The observed crystalline phases were YBa2Cu3O7-$\delta$, Y2BaCuO5, and BaCuO2, or Ba2Cu3O5＋x, and some amount of noncrystalline phase in the Ba-Cu system comounds. In contact with distilled water, YBa2Cu3O7-$\delta$ and Y2BaCuO5 did not have considerable heat liberation, but in the binary compounds of the Ba-Cu-O system, the amount of total heat liberation was increased with respect to the Cu content. It might be that the reaction of high temperature superconductor YBa2Cu3O7-$\delta$ with water and/or moisture originated from the unusual oxidation state of Cu ion and the presence of amorphous Ba-Cu oxide compound. The degradation of high Tc superconductor by moisture and water could be controlled by restricting the heterogeneous distribution of Tc comlposition and the formation of second phase, such as stable Y2BaCuO5, and the resulting unstable Ba-Cu oxide compound.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.1
• /
• pp.28-31
• /
• 2015

An in-flight fragment separator, which aims to produce and study rare isotopes, consists of superferric quadrupole triplets and $30^{\circ}$ dipole magnets to focus and bend the beams for achromatic focusing and momentum dispersion, respectively. The separator is divided into pre and main stages, and we plan to use superconducting magnets employing high-Tc superconductor (HTS) coils in the pre-separator area, where radiation heating is high. The HTS coils will be cooled by cold He gas in 20-50 K, and in the other area, superferric magnets using low-temperature superconductor (LTS) will be used at 4 K. A few LTS coils were wound and successfully tested in a LHe dewar, and the design of cryostat has been optimized. Development of the HTS coils is ongoing in collaboration with a group at KERI. An HTS coil of racetrack shape was wound and tested in a $LN_2$ bath and in a dewar with cryocooler. No degradation on critical current due to coil winding was found.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.15-18
• /
• 2006

REBCO coated conductors (RE: rare earth elements) have recently drawn great attention since they are known to possess stronger flux pinning centers in high magnetic fields compared with YBCO coated conductors. In this study, $GdBa_2Cu_3O_{7-d}(GdBCO)$ was selected to investigate the influence of the distance between target and substrate and substrate temperature on the superconducting properties of GdBCO films on the $SrTiO_3(100)$ substrate. Samples were fabricated by pulsed laser deposition (PLD) with a Nd:YAG laser (355nm). Under a given oxygen pressure of 800mTorr, we changed the distance between target and substrate from 5.5cm to 7.0cm and the substrate temperature from $750^{\circ}C\;to\;850^{\circ}C$. The crystallinity and texture of GdBCO films were analyzed by X-ray diffraction (XRD), and the surface morphology was observed by the scanning electron microscopy (SEM). Tc and Jc values were measured by the four point probe method. High quality GdBCO films with Tc of 89.7K and Jc over $1MA/cm^2$ at 77 K in self field were successfully fabricated by optimizing processing parameters. The detailed processing conditions, microstructure and superconducting properties will be presented for a discussion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1990.10a
• /
• pp.31-35
• /
• 1990

In the ($Bi_{1-x}Pb_{x}$)$_2$$Sr_2$$Ca_2$$Cu_{3.6}$$O_{y}$ (x=0∼0.5) superconductors, DTA and XRD-pattern analyses were performed to obviousely define optimal calcining and sintering temperature. And, understanding behaviors of High-Tc phase with preparation condition of superconductors, that is, calcining and sintering temperature, sintering time, and variation of Pb contents, in order to make single phase of superconductor, microstructure and its composition were analyzed with SEM, XRD, and EDAX. continuously, the cause of phase transition was define with synthetically studying mutural relation between measured electrical resistivity and current density. Also, in order to design enhancement of critical current density, Jc required for realization, samples varied with pressing condition were made, and measured its, Jc.