• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.85-90
• /
• 2004

선박보안경보장치(Ship Security Alert System)는 2001년 미국 9월11일 테러 이후에 전 세계적으로 이에 대응하기 위한 방법으로 해상에서 선박을 통해 발생될 수 있는 테러에 대비하기 위한 통신시스템으로 2004년 7월1일 이후에 건조된 선박에는 반드시 탑재되어야 한다. 이 장치는 IMO SOLAS 국제 조약에 따르며 선박의 안전이 위협을 받고 있거나 위태롭게 되었음을 해당기관에 표시하기 위하여 육상으로 보안경보를 송신할 목적으로 선박에 설치되어야 한다. 무선통신설비는 특별히 정하지는 않았지만 전 세계를 포함하기 위하여 위성망을 사용하는 것이 유리하다. 본 고에서는 선박보안경보장치의 필수 기능 및 사용 가능한 통신시스템 특성에 대해서 분석하였으며 국내 관련 기술기준 방향에 대하여 제안하였다.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.87-97
• /
• 1998

거친 해역에서 내항성능이 우수한 선형을 만들기 위해서는 무엇보다도 수선면적을 작게 하여 파랑하중을 적게 받도록 하는 것이 가장 이상적인 방법으로 알려져 있다. 그러나 과대한 수선면적의 감소는 침수표면적 대 배수량비가 증가하여 속도 측면에서 불리한 점을 가지게 된다. 본 논문에서는 일반 소수선면 쌍동선(SWATH Ship)보다는 수선면적을 키워서 속도와 내항성능면을 동시에 고려한 새로운 선형을 제시하고자 한다. 여객 350명, 항해거리 300 n. miles, 해상상태 4에서 운항속도 30노트로 쾌적하게 항주할 수 있는 선형을 설계하였으며 모형시험으로 검증하였다. 본 논문은 개발선형의 저항성능, 내항성능, 설계개념에 대해서 언급하고 다른 고속선형들과의 간접적인 성능 비교를 하였다.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.1-15
• /
• 1993

국내외적인 여건 변화와 향후 초고속선 해상 수송시대에 대비한 세계 각국의 초고속선 개발에 대처하기 위하여 당사 선박해양연구소에서는 3단계 고속선 개발계획을 수립한 바 있다. 그 1단계 사업으로 300인 이상의 승객을 태우고 최고 속도 40노트 이상으로 왕복 800해리의 장거리를 운항할 수 있는 "장거리 고속 수중익 쌍동여객선"을 개발하여 건조하게 되었다. 본 장거리 고속 수중익 쌍동여객선의 설계과정을 통하여 국내에서는 최초로 기능별 최적화와 성능확인을 위한 방대한 양의 이론적 분석과 모형시험이 체계적으로 이루어졌다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.444-449
• /
• 2001

There have been many accidents of passenger ships on the sea and they have caused a big loss of human lives. Maritime Safety Committee(MSC) of International Maritime Organization(IMO) made evacuation analysis of Ro-Ro passenger ships mandatory in order to save as many lives as possible at the time of accident. But this is a temporary regulation and HSC/IMO ties to introduce a performance-based regulation to improve the effect of regulation. Simulation-based evacuation analysis is the basis of performance-based regulation. In this paper, we performed a simulation-based evacuation analysis on a passenger ship, which is usually used in the plying between land and islands in Korea, with EXODUS system. Through inspecting the results from this analysis in more detail, we can make a proposal to improve the safety of passenger ship. Finally we describe the features of IMEX(Intelligent Model for Extrication Simulation), a new evacuation model being developed in KRISO.

• 기술사
• /
• 제16권2호
• /
• pp.1-11
• /
• 1983

The resistance property of a high speed passenger craft (: "DOL-PIN HO" designed by the author in 1972) is investigated as follows; -. The Resistance property of the craft is determined by savitsky′s method and blount-Fox′s method. The theoretical results are also compared with the full scale data. The comparison reveals that the result when using blount/fox′s method are in much closer agreement with the full scale data than savitsky′s. -. The effects of ship speed on the positions of the center of pressure and of the longitudinal center of gravity (L.C.G.) are investigated. The investigation shows that the position of L.C.G. of the craft is almost constant although the ship speed is changed. -. The effect of transom flap on the Resistance property of the craft is studied using savitsky/brown′s method. From the study it is found that the resistance of the craft is decreased and hence speed gain (about 3% of the service speed) can be obtained, when using transom flap for the craft.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.116-123
• /
• 2004

The demand for the stable and comfortable cabin of a high speed passenger ship is increasing. The study on shipboard comfort has been mainly concentrated on the motion control of a whole hull body. In this study, however, a new control system operated by two parallel robots (3RPS, 3SPR) such as the active suspension system of motor vehicle is proposed. The goal of this control is keeping zero velocity of the upper robot (cabin) although the lower robot (ship) is moving by the waves. Jacobian matrix was used to design the controller, From the simulation results, the remarkable reduction of motion of the cabin (upper platform) was observed. The 3SPR parallel robot shows better performance compared to the 3RPS robot.

• Journal of Welding and Joining
• /
• 제24권6호
• /
• pp.33-38
• /
• 2006

Since the 1990's, European shipbuilding industries introduced hybrid welding process in order to decrease thermal distortion of welded joints in passenger shipbuilding. In this study, we investigated effects of hybrid welding parameters on the toughness of weld metal using DH36 steel in order to obtain more sound welds in passenger shipbuilding. Type of leading process, joint gap distance and chemical composition of consumables were considerably correlated with the toughness of weld metal. Especially, the toughness was considerably increased with high-Ti containing consumables. In addition, hybrid welding speed increased by using plasma cut edges, the oxides layer of which increased absorption efficiency of laser beam.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.189-205
• /
• 1996

현대중공업 선박해양연구소에서는 3단계로 구성된 SWATH선 개발 계획을 수립하고 연구를 수행 중에 있다. 제1단계는 승객 300명, 선속 35노트, 운항거리 250 해상 마일의 소형고속 SWATH 여객선을 개발하는 것이다. 본 연구를 효율적으로 수행하기 위하여 연구초기에 SWATH선의 여러가지 유체정역학 및 유체동역학적 특성을 단시간 내에 계산 및 추정할 수 있는 각종 전산 프로그램을 먼저 개발하여 놓았다. 설계를 위한 각종 전산 프로그램의 개발과 함께 설계변수의 변화에 대한 체계적인 이론적 분석과 선정된 선형에 대한 단계적인 모형시험을 통하여 최종설계에 도달하였다.

• 대한조선학회논문집
• /
• 제47권5호
• /
• pp.689-696
• /
• 2010

Bulbous bow is one of the important design factors on the design of fore-body hull form. Using the interference technique of ship waves, the bulbous bow can decrease the wave resistance of ship. Recently, the goose neck bulb is applied mainly for high speed vessels like passenger ships and ferries etc.. Also, the goose neck bulb is applied for relatively high speed merchant vessels like container ships and LNG carriers. However, existing research papers about the goose neck bulb are not enough as reference data for the design of bow hull form. In this study, numerical calculations are carried out to investigate the bow wave characteristics of a high speed ferry with a normal high nose bulb or a goose neck bulb. By comparing the pressure distributions on the hull surface and the wave systems near the bow, the features of wave resistance reduction are discussed. Also, Numerical calculations were carried out for a series of goose neck bulbs to figure out the optimum bulb size. The maximum reduction rate of pressure resistance for the fore-body is achievable up to 8% by adopting the goose neck bulb in the present calculation.