• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.465-467
• /
• 1999

The data transmission system in MAGLEV is required a high quality and high speed for a train safety and reliability driving. In the transmission channel between a vehicle and a ground-site, Gaussian noise is negligible, but impulse noise from the chopper controlled propulsoin unit and the Power supplying device is very severe. The transmission channel must be protected from these noise. In this paper, we propose a DSSS (direct-sequence spread spectrum) modulation as a new data transmission technique in the railway and analyze this data transmission characteristics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.253-256
• /
• 2001

This paper describes a high speed MAC(Media Access Control) function chip for IEEE 802.11 MAC layer protocol. The MAC chip has control registers and interrupt scheme for interface with CPU and deals with transmission/reception of data as a unit of frame. The developed MAC chip is composed of protocol control block, transmission block, and reception block which supports the BCF function in IEEE 802.11 specification. The test suite which is adopted in order to verify operation of the MAC chip includes various functions, such as RTS-CTS frame exchange procedure, correct IFS(Inter Frame Space)timing, access procedure, random backoff procedure, retransmission procedure, fragmented frame transmission/reception procedure, duplicate reception frame detection, NAV(Network Allocation Vector), reception error processing, broadcast frame transmission/reception procedure, beacon frame transmission/reception procedure, and transmission/reception FIEO operation. By using this technique, it is possible to reduce the load of CPU and firmware size in high speed wireless LAN system.

• 한국항공운항학회지
• /
• 제17권3호
• /
• pp.70-77
• /
• 2009

We proposed the method of avionics integrated architecture using high-speed fiber optic bus. Typically, data bus of aircraft consists of electronic and optic data transmission method. Avionics systems are difficult to operate the electronic data transmission method for the high speed data processing, synchronization and interconnection between flight control system and flight management system efficiently. In this paper, it is known to look into the problem of data bus and the advanced trend in avionics systems, and propose the appropriate data bus of the advanced avionics systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1255-1261
• /
• 2010

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• 정보처리학회 논문지
• /
• 제13권8호
• /
• pp.349-355
• /
• 2024

본 논문은 다중 경로를 사용해야 하는 현대 네트워크 환경에서 데이터 전송 효율을 향상시키기 위한 새로운 혼잡 제어 알고리즘인 동적 대역폭 인식 혼잡 제어(DBAC)를 제안한다. 전통적인 단일 경로 TCP는 한계가 있어 다중 경로 TCP(MPTCP)가 여러 경로를 동시에 활용하여 대역폭을 극대화하고 전송 신뢰성을 향상시키지만, MPTCP는 경로 특성의 비대칭성으로 인해 고속 장거리 네트워크에서 성능 저하를 겪는다. 이를 해결하기 위해 DBAC는 BDP가 큰 경로에는 TCP CUBIC을, 일반 경로에는 LIA를 결합하여 자원 활용과 공정성을 최적화한다. 실험 결과, DBAC는 자원활용과 전송 성능을 크게 향상시켜, 기존 LIA가 20% 미만의 대역폭을 사용하는 것에 비해 높은 BDP 경로에서 80% 이상의 대역폭을 효과적으로 사용하는 것으로 나타났다.

• 한국통신학회논문지
• /
• 제29권3A호
• /
• pp.293-302
• /
• 2004

무선랜은 무선으로 근거리 단말들을 연결하는 통신 기술로, 일반적인 무선랜의 구성은 하나의 AP와 하나 이상의 단말 기기가 BSS를 구성한다. 무선랜 서비스 영역에서 AP와 거리가 가까운 단말은 고속의 데이터 전송률을 보장받을 수 있지만 AP에서 거리가 멀리 떨어진 단만은 신호의 세기가 약해지므로 고속데이터 전송률의 보장을 받을 수 없는 단점을 가지고 있다. 본 논문에서는 무선 단말 중 일부를 중계 단말로 이용함으로써 그룹화를 통해 고속데이터 전송을 가능하게 하는 방법을 제안하고, 시뮬레이션을 통해 무선 단말의 그룹화를 위해 제안한 깊이우선탐색 알고리즘과 넓이우선탐색 알고리즘을 비교, 분석하였다. 그 결과 넓이우선탐색 알고리즘이 무선 단말을 위한 그룹화에 보다 효과적인 알고리즘임을 보였다.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.40-46
• /
• 2012

In this study, numerical analysis was conducted to understand the flow characteristics of lubrication system in a manual transmission installed in a commercial vehicle. Also, the analysis was conducted with the purpose of improving the heat and lubricative condition of the transmission. Discharging flow rates on each oil hole outlet according to various engine rotating speed and the length of oil hole branch was calculated. In conclusion, as engine rotating speed is high and the length of oil hole branch is long, the discharging flow rate is high by virtue of the centrifugal force. In addition, this study proposed data for optimal design of lubrication system in manual transmission for a commercial vehicle.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.50-58
• /
• 1996

This paper proposes the channel-access protocol suitable to a very high speed photonic WDM network with star configuration, which can provide a high channel utilization and insensitivity to the propagation delay. The proposed protocol employs a control channel and a simple status table to deal with the propagation delay which has been a major limiting factor in the performance of the very high speed optical communication networks. The control channel transmits control information in order to reserve access on data channels, and each node constitutes a status table after the reception of control pckets which holds information about the availbility of destination node and data channel. The proposed protocol is insensitive to the propagation delay time by removing necessity of the retransmission and by allowing parallel transmission of control packet and data packets. It is proved in analysis and discrete event simulation that the proposed protocol is superior in throughput and mean delay, especially at the high load conditions compared to the existing high speed channel-access protocols.

• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.333-340
• /
• 2011

한국천문연구원은 한일상관센터 (Korea-Japan Correlation Center, KJCC)에 2009년부터 한일공동VLBI상관기(Korea-Japan Joint VLBI Correlator, KJJVC)를 설치하여 운영하고 있다. 한일공동VLBI상관기는 한국우주전파관측망(Korean VLBI Network, KVN), VERA(VLBI Exploration of Radio Astrometry), JVN(Japanese VLBI Network) 및 공동 관측망 등에서 관측한 VLBI(Very Long Baseline Interferometer) 데이터를 상관처리하고, 과학적 목적을 위해 관측데이터를 처리하는 전용 계산기로 사용된다. KJJVC는 각 구성시스템 사이의 데이터 입출력 규격으로 VLBI 국제표준인 VSI(VLBI Standard Interface)를 따르고 있다. 특히 관측된 데이터를 상관처리하기 위해 고속재생기인 Mark5B시스템과 동기재생처리장치(Raw VLBI Data Buffer, RVDB) 사이에는 1024 Mbps급으로 데이터가 전송된다. 고속 데이터 전송에 있어 발생하는 전자기 방해 (Electromagnetic Interference, EMI)는 관측데이터의 손실을 야기 시키며, 전송 케이블의 길이가 길수록 손실 발생빈도가 많고, 디지털 데이터 신호의 전압레벨을 감소시켜 데이터 인식 오류를 초래한다. 따라서 본 논문에서는 VSI 규격의 통신에서 발생하는 EMI 잡음 정도를 측정하고, 데이터 손실을 최소화할 수 있는 방법으로 1) RC 필터를 사용한 방법, 2) Microstrip 라인을 이용한 임피던스 매칭, 3) Differential line driver를 이용한 신호 복원 방법 등을 제안하였다. 각 제안방법들의 유효성을 확인하기 위해 제안방법들은 시뮬레이션과 실험적인 구현을 통하여 성능시험을 수행하였으며, 각각의 제안 방법이 VSI 규격의 고속 데이터 전송에 유효함을 확인하였다.