• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.92-97
• /
• 2006

Hull forms of a high speed small boat have been developed through numerical studies. A round bilge type hull form has been drived form a using chine hull form with HCAD, a hull form variation software. Wave resistance and the flow fields around the ships have been computed using well-known software, WAVIS. This software employs Rankine source method with non-linear tree surface condition as well as dry transom boundary conditions. The round bilge hull form showed better resistance performance than to the chine hull form for the whole speed range. However, considering the building and labor costs of the small shipyard, the chine hull form has been selected and its wave resistance characteristics has been improved by modifying the bow regions and applying the stem wedge. It is found that the effect of stem wedge is quite satisfactory to improve the resistance characteristics of high speed chine hull form.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.3
• /
• pp.95-102
• /
• 2018

As a recent technical approach, a high-speed planing hull was tried to realize a friction reducing system by simultaneously actuating the triple streamlined step hull form in association with optimum speed of 35 knot planing for fishing boat. In this approach, the streamlined step hull form with triple structure of type was attached under the bottom of high-speed planing hull, while a friction resistance is reduced in the process of running at the speed of 35 knot. In addition, this research was to make a performance test as to the manufactured product and acquire the purposed values and the development items. Actually, after manufacturing the desired prototype of high-speed planing hull, the significant items, fuel efficiency (second) and amount of fuel consumption (degree) including maximum speed (knot) were estimated for a performance test. And tensile strength (MPa) and bend strength (MPa) as to the completed prototype like a high speed planing hull were also acquired during the test.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.37
• /
• pp.12-23
• /
• 2014

본 연구에서는 최근 증가하는 해양레저 수요 및 관심에 따른 대응을 위하여 고속레저 선박을 개발하고 이에 따른 국내 레저선박 건조기술 축적 및 경쟁력 향상을 목적으로 하였다. 따라서 선형 및 도면 개발도 중요하지만 이러한 내용들을 수요자들에게 홍보할 수 있는 정보변환알림시스템 및 홍보영상 매뉴얼도 함께 개발하였다. 따라서 연구 결과물을 통해 수요자 의견을 보다 쉽고 정확하게 반영하여 보트의 제품화를 하도록 하고 이를 통해 경쟁력을 높일 수 있도록 하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.110-117
• /
• 1995

본 연구는 퍼지모델링을 이용한 고속 소형선의 전체 저항곡선 및 마력곡선을 고속 소형선의 선형요소 자료들로부터 퍼지모델링 알고리즘을 통해 도출하고, 그 결과를 모형시 험 결과와 비교하고 있다. 또한 퍼지모델링 알고리즘에 의한 전체 저항곡선 및 마력곡선이 고속 소형선의 선형요소 결정에 효율적으로 적용됨을 보이고 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.3
• /
• pp.500-508
• /
• 2015

High-speed heavy loaded monohull ships can benefit from application of drag-reducing air cavities under stepped hull bottoms. The subject of this paper is the steady hydrodynamic modeling of semi-planing air-cavity hulls. The current method is based on a linearized potential-flow theory for surface flows. The mathematical model description and parametric calculation results for a selected configuration with pressurized and open air cavities are presented.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.408-413
• /
• 2004

High speed planning boats also have been required more and more the rational strength analysis and evaluation for the optimal structural design in respect of the structural lightness according to the high speed trend. Even though the suggestion of the simple type equation for the equivalent dynamic pressure is reasonable to design the scantling of ship structure conveniently, many research activities for more reasonable improvement of the simple design pressure, have been continued to suggest the more accurate equivalent static description of tire structural response such as the deflection and stress of hull structure. In this research, we focus on the aluminum bottom stiffened plate structure in which structural scantling is mainly depend on the local loads such as dynamic or impact pressure without other load effects and structural response for the simple dynamic equivalent pressure was investigated through the structural analysis. In order to investigate the structural response of the bottom stiffened plate structure subjected to the dynamic equivalent design pressure, linear and nonlinear structural analysis of the bottom stiffened plate structure of 4.3 ton aluminum planning boat was performed based on the equivalent static applied loads which were derived from the KR regulation and representative one among various dynamic equivalent pressure equations. From above analysis results, we found that the response such as deflection and stress of plate member was similar with the response results of one plate member model with fixed boundary, which was published previous paper and in case of KR design loading, all response of stiffened plate structure were within elastic limit. Through the nonlinear analysis, nearly elastic behavior including the slight geometrical nonlinear response was dominant but plastic local zone was appeared at $85\%$ limit load. Therefore, we can say that through tire linear and nonlinear analysis, this stiffened plate member has no structural strength problem based on the yield criteria in case within $60\%$ limit load except the other strength point of view such as the fatigue and buckling problem.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.308-312
• /
• 2001

This study was carried out to develop a basic form of planning hull type fishing boat. G/T 10ton class is selected as object hull form, and hull form is designed in Chosun University. A series of test results of LCG variations for S different LCG points are presented in this paper. The test was performed in Davidson Laboratory, and the scope of tests include resistance, trim and sinkage.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.1
• /
• pp.50-55
• /
• 2010

The ship's heading information of hybrid GPS/EM compass were applied to the AIS of fishing vessel and examined the possibility of accuracy improvement. It is observed 453 each in AIS receiver of land among 3,982 each in AIS Rx/Tx transponder of the test ship at sea, and transmission interval according to the speed of ship is determined the 11.4% good transmitting data of the all information. In results, maximum compass error for the ship's heading of an EM compass was $19.1^{\circ}$. The variance of ship's heading owing to the speed of ship is surveyed. The COG (Course Over Ground) was changed extremely in $180^{\circ}W-179^{\circ}E$ range under 4.9knots, and in $24^{\circ}W-23^{\circ}E$ range over 4.9knots. Finally, using the ship's heading of EM compass and the COG from GPS for the autopilot system of a small fishing boat and the ship's heading information of AIS results in danger on the own ship's navigation safety and leads to make confusion both the others and VTS (Vessel Traffic Service) center. Therefore, the hybrid GPS/EM compass is identified as the best system for a small fishing boat and is allowed to offer continuously a ship's heading information with high accuracy and stability.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.45-55
• /
• 1999

The majority of fishing vessels(under 20 tonnages) in Korea have a high casualty accident of the flood and capsizing occurred by lack of stability. Actually, it is so difficult to make out the data of inclining and stability tests of small fishing vessels after building, because most of them were built on experiences of manufacturer. According to above reasons, the aim of this study is an attempt to propose a stability criteria of small fishing vessels as follows: Firstly, it is examined that the stability is driven from a transverse metacenter height of actual ships, which is able to obtain a basic drawing and stability data. Secondly, it is examined the heeling at high-speed turning, and the period of rolling according to B/D(breadth/depth). Finally, it is suggested the stability criteria by using a dynamic state which is applied in passenger boat and fishing vessels over 24 meters.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.283-286
• /
• 1998

For the systematic study on the resistance characteristics of the planing hull, the experimental studies on the correlation between geometrical characteristics of the subject hull forms and their hydrodynamic characteristics are carried out. This study is the first stage to develop the advanced planing hull type fishing boat and involves the followings; -Resistance characteristics for typical four different section types, -Resistance characteristics for different length-beam ratio