• 전력전자학회논문지
• /
• 제9권6호
• /
• pp.525-535
• /
• 2004

본 연구에서는 높은 변조지수 M 영역에서는 소음 및 고조파 스펙트럼의 광대역화 효과가 저하되는 2상 RCD-PWM(Random Centered Distribution PWM)기법의 문제점을 개선하고자, 듀얼 영 벡터 모드를 갖는 2상 RCD(Dual Zero Vector Modes RCD : DZRCD)기법을 제안하였다. 제안된 2상 DZRCD기법은 변조지수 M=0.8을 기준으로 하여 M이 0.8보다 큰 영역에서는 영 벡터로 $V_0$(111)를 선택하고, 0.8보다 작은 영역에서는 $V_0$(000)를 선택한다. 제안된 방법을 16비트 마이크로 콘트롤러인 C-167기반의 유도 모터 구동 시스템에 적용해 본 결과, M이 0.8이상인 영역에서 모터의 전압 / 전류 및 스위칭 소음 스펙트럼의 광대역화 특성이 종전의 방법과 비하여 우수함을 확인할 수 있었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권10호
• /
• pp.528-534
• /
• 2003

A grid connection algorithm is proposed for the doubly-fed induction generator (DFIG) which is widely adopted in high power variable speed wind turbine. Before the stator of DFIG is connected to grid, rotor-side converter is used to control the induced stator voltage. As a result, the stator transient current is limited below the rate value during the connection by the proposed synchronization of the stator voltage to the grid voltage. A wind power generation simulator using DC motor and wound-rotor induction generator is built and the dynamic characteristics of proposed algorithm is verified experimentally.

• Journal of Power Electronics
• /
• 제3권3호
• /
• pp.159-166
• /
• 2003

The winding insulation of low-voltage induction motors in adjustable-speed drive system with voltage-fed Inverters is substantially stressed due to the uneven voltage distribution and excessive voltage stress (dv/dt), which result in the premature insulation breakdown In this paper, the detailed insulation test results of 26 low-voltage induction motors are presented. Six different types of insulation techniques are applied to 26 motors. The insulation characteristics are analyzed with partial discharge, discharge inception voltage, AC current, and dissipation factor tests Also, insulation breakdown tests by high voltage pulses are performed, and the corresponding breakdown voltages obtained.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.846-855
• /
• 2011

This paper proposes a control mode switching scheme between vector control and constant V/f control for induction machine (IM) drives for maximum torque utilization in a higher speed region. For the constant V/f scheme, a smooth transition method from the linear range of PWM up to the six-step mode is applied, by which the machine flux and torque can be kept constant in a high-speed range. Also, a careful consideration of the initial phase angle of the voltage in the transient state of the control mode change between the vector control and V/f schemes is described. The validity of the proposed strategy is verified by the experiment result for a 3-kW induction motor drives.

• 전자공학회논문지B
• /
• 제33B권5호
• /
• pp.159-164
• /
• 1996

In this paper, a novel control strategy of curretn source PWM converter and inverter system for induction motor dirves is proposed. The PWM converter controls line current to be sinusoidal and makes input power factor unity. In the inverter part, a minor voltage control loop is incorporated in the current control looop in order to suppress unstale resonance between the filter capacitor and the motor leakage inductance and to keep the stator voltage under the rated value. In additon, the modulation index control of the inverter currents ripples and inverter loss. With the proposed algorithm, both high dynamic responses and satisfactory static performance can be obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.181-183
• /
• 2004

Conventional VVVF control voltage-fed inverter of blower induction motor has advantage that very speedy response characteristics for air-harmonic. But there have bad power factor on input orient have its large volume and high error ratio over 80%. And there are very expensive by reason of using the capacitor input rectifier. In this paper, It could make the smoothing capacitor-less inverter for air-blower motor by using the instantaneous compensation PWM controller. This inverter system has small volume and value compare with the conventional VVVF control inverter for blower induction motor for air-harmonic equipment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.23-28
• /
• 1998

We propose a nonlinear feedback controller that can control the induction motors with high dynamic performance by means of decoupling of motor speed and rotor flux. The nonlinear feedback controller needs the information on some motor parameters. Among them, rotor resistance varies greatly with machine temperature. A new recursive adaptation algorithm for rotor resistance which can be applied to our nonlinear feedback controller is also presented in this paper. The recursive adaptation algorithm makes the estimated value of rotor resistance track its real value. Some simulation results show that the adaptation algorithm for rotor resistance is robust against the variation of stator resistance and mutual inductance. In addition, it is computationally simple and has small estimation errors. To demonstrate the practical significance of our results, we present some experimental results.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.955-963
• /
• 2013

To acquire a performed and practical solution that is free from chattering, this study proposes the use of an adaptive super-twisting algorithm to drive a single-phase induction motor. Partial feedback linearization is applied before using a super-twisting algorithm to control the speed and stator currents. The load torque is considered an unknown but bounded disturbance. Therefore, a time-varying switching gain that does not require prior knowledge of the disturbance boundary is proposed. A simple sliding surface is formulated as the difference between the real and desired trajectories obtained from the indirect rotor flux oriented control strategy. To illustrate the effectiveness of the proposed control structure, an experimental setup around a digital signal processor (dS1104) is developed and several tests are performed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.253-254
• /
• 2016

This paper proposes a novel starting method of a high speed induction motor with air bearings for turbo blowers. The friction of air bearings varies according to rotating speed, operating temperature and usage time. Specially, friction torque at initial starting state under low bearing temperature usually results in starting failures of the conventional V/F control method. Therefore, this paper proposes a new starting method, which consists of an initial I/F control mode and smooth transition method to V/F control mode to overcome the starting failure. The experimental results are shown to verify the analysis and the usefulness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.83-86
• /
• 1991

This paper presents a method that optimizes the teeth shape of linear induction motor. Independent variables are x-coordinate change of four nodes at each tooth, and its objective function is thrust at start. As a result, linear induction motor with high quality which its thrust increases up to 10% per pole can be designed.