• Carbon letters
• /
• 제2권1호
• /
• pp.22-26
• /
• 2001

Na alloyed graphite intercalation compounds with stage 1 and 2 were synthesized using the high temperature and pressure technique. Thermal stability and staging transitions of the compounds were investigated depending on heating rates. The thermal stability and temperature dependence of the deintercalation compounds were characterized using differential scanning calorimeter (DSC) analyzer. Enthalpy of formations were confirmed at temperatures between 25 and $500^{\circ}C$, depending on the various heating rates. The structure ions and interlayer spaces of the graphite were identified by X-ray diffraction (XRD). Diffractograms of stages with non-integral (00l) values were obtained in the thermal decomposition process, and stacking disorder defects and random stage modes were observed. The average value of the interlayer C-C bond lengths were found approximately $2.12{\AA}$ and $1.23{\AA}$ from the diffractions. Based on the stage transition, the degree of the deintercalaton has a inverse-linear relationship against the heating rate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.186-191
• /
• 2000

Stability of a Bi-2223/Ag tape was studied by using a numerical method. A numerical modeling has been developed to analyze the dynamic evolution of normal zone in a composite tape Bi-2223/Ag. In this paper, the stability of HTS tape is studied by considering the non-uniform temperature distribution in a cross-sectional area. The finite-difference method(FDM) is used to solve the two-dimensional heat conduction equation. Two kinds of analyses are compared to quantify the critical disturbance energy fur quenching HTS tapes. One is the length-thickness(x-y) side and the other is the length-width(x-z) side. The results of analyses shows that the critical disturbance energies for each cases seem to be very close for considered Bi-2223/Ag tape.

• Archives of Pharmacal Research
• /
• 제20권2호
• /
• pp.171-175
• /
• 1997

The stability of ondansetron and fluconazole in 5% dextrose injection and normal saline during simulated Y-site injection at room temperature was studied. Ondansetron 0.03, 0.1 and 0.3 mg/ml were admixed 1:1 with fluconazole 2 mg/ml. The solutions were stored at room temperature and samples were retrieved at time 0, 1, 2, 4 and 12 hr for immediate assay. At the time of the assay and before any dilution, each sample was visually inspected for clarity, color, precipitation, and the pH was determined. Drug concentrations were measured by a stability-indicating high performance liquid chromatograph. Ondansetron 0.03, 0.1 and 0.3 mg/ml were stable when mixed with concentration of fluconazole 2 mg/ml. There were no change in clarity and color and no precipitates in any admixture for 12 hr of inspection. The pH measurements did not have a particular trend in any direction over time.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.60-72
• /
• 2003

To investigate the effect of cholesterol in liposome on the stability of incorporated retinol, the physico-chemical experiments for various amounts of cholesterol-containing liposomes were performed. Liposome with retinol containing cholesterol was prepared as multilamella vesicles(MLVs) by dehydration/rehydration method. The incorporation efficiency of retinol into liposome was maximized as 99.31 % at 50:50 (phosphatidylcholine/cholesterol) at pH 9. The stability of incorporated retinol at low storage temperature was enhanced with increasing cholesterol content than at high storage temperature. For example, incorporated retinol in liposome at glycine buffer(pH 9} was degraded slowly during storage at 4. The degradation of retinol in liposomes was slower at pH 9 than at pH 7. These results supported that cholesterol in liposome increased largely the stability of incorporated retinol.

• Preventive Nutrition and Food Science
• /
• 제3권2호
• /
• pp.133-142
• /
• 1998

Effects of protein heat treatment and surfactant additionoo the orthokindetic stability of $\beta$-lactoglobulin-stabilized emulsions have been investigated under turbulent flow conditions. In studies on protein-stabilized emulsions, samples which had been subjected to heat treatment(i.e. the protein solution orthe emulsion) have been found to be more prone to orthokinetic coalescene than the untreated ones. The emulsions stabilized with protein heated above the denaturation temperature(i.e. 7$0^{\circ}C$) showed the bigger initial average droplet size, which resulted in an increased orthokinetic coalescenece rate. The storage of the protein-stabilized emulsion at high temperature prior to the shearing experiment also made the emulsion less stable in the shear field. Interestingly. the addition of DATEM has been found to produce a substantial increase in orthokinetic stability of the heat-denatured protein-stabilized emulsion system, although Tween 20 is the opposite case.

• KSTLE International Journal
• /
• 제2권2호
• /
• pp.120-126
• /
• 2001

Performance requirements for automatic transmission fluids have been changed reflecting the design changes of automatic transmissions. The major purpose of these design changes is concentrated upon improvements of both fuel economy and drivability. In order to formulate such high performance ATFs as satisfy those requirements, it is necessary to use high quality base oils like VHVI base oils and PAOs. In this study, the effect of base oils characteristics on ATF performance is investigated, mainly regarding differences in frictional characteristics with deterioration. Frictional characteristics are determined using the SAE No. 2 machine and ATFs are deteriorated under various controlled conditions. Moreover low-temperature fluidity, oxidation stability, and seal compatibility are also compared for four different ATFs. From the investigation, it was found that the use of Group III and IV base oils in ATFs gives several benefits with respect to low temperature viscosity, oxidation stability and SAE No.2 friction characteristics.

• Journal of the Optical Society of Korea
• /
• 제6권1호
• /
• pp.5-12
• /
• 2002

A novel interrogation scheme to detect fine Bragg wavelength shift using a long period fiber grating pair with erbium-doped fiber inserted between the two gratings is reported. The technique is shown to feature high resolution and much more immunity to temperature perturbation compared to the conventioned Mach-Zehnder interferometer demodulation system. For quasi-static strain measurement, this approach provides high wavelength resolution of 0.05 pm that corresponds to 41.7 ne in strain and $3.8 $\times$ 10^{-3}$$^{\circ}C$ in temperature. This interrogation system is also employed in dynamic measurement to obtain the minimum detectable strain perturbation of ~ 8.76 ne/H $z^{{\frac}{1}{2}}$ at 100 Hz. Moreover, this interrogation system has prominent thermal stability. This thermal stability comes from the fact that two arms of the interferometer, the core and cladding in erbium-doped fiber, are exposed to nearly the same environment .

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.833-838
• /
• 2006

Graphite is suitable for high temperature structural materials because of chemical stability as well as unique crystal structure. Especially, graphite can be used as a part of a nuclear reactor due to high tolerance at the extreme conditions of high temperature and neutron irradiations. Although study of oxidation properties or behaviors of graphite are very important and essential for the life and stability of the nuclear reactor, most of studies treat this theme lightly. This work focuses on the oxidation characteristics of several grade isotropic graphite of the nuclear reactor.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.139-146
• /
• 2017

This study was conducted to develop a new drying technology in order to quickly and massively dry bamboo tubes without crack and check. The bamboo tubes with the diameter of 45 mm - 68 mm had been impregnated in the solution of PEG-1000, and then were dried under room temperature and high temperature, respectively. The cracks occurred on all control specimens while no cracks were found on PEG treated specimens during drying at room temperature due to effect of PEG restraining the circumferential shrinkage of bamboo tube. But the drying period of this method was too long (200 days) compared to 10 hours of kiln drying. During fast high temperature drying, cracks occurred on all control specimens, but no cracks were found on PEG treated specimens, which could be accounted for more solidified PEG due to higher drying temperature and faster drying rate, and the tension set formed on the surface of bamboo tube in the early stage of drying owning to high drying temperature and low relative humidity. Thus, it is advised that PEG treated bamboo tube should be fast dried at high temperature in order to not only prevent crack or check in short drying period but also increase the dimensional stability of the products made of bamboo tubes.

• 한국결정성장학회지
• /
• 제29권4호
• /
• pp.160-166
• /
• 2019

산화세륨($CeO_2$)는 고체산화물연료전지, 자동차 삼원 촉매, 산소 캐패시터 소재 등의 고온환경에서 구동되는 촉매 응용분야에 널리 활용되고 있으며 중요한 희토류 산화물 중에 하나이다. 고온 환경에서 $CeO_2$의 우수한 촉매 활성을 유지하기 위하여 초기 합성단계에서 높은 비표면적을 갖는 미세구조제어 연구와 나노 미세구조가 고온 열 사이클과 산화-환원 사이클 변화에서 안정하도록 하는 연구가 필요하여 많은 연구가 진행되고 있다. 따라서 본 연구에서는 탄산염 침전법의 전구체 결정화 단계에서의 이방성을 정밀 제어하여 고 비표면적의 flower-like $CeO_2$를 성공적으로 합성할 수 있었다. 또한, 서로 다른 탄산염이온 침전제의 침전 반응 경로 제어를 통한 침전 수화물 전구체의 이방적 결정 특성으로부터 최종 고 비표면적 $CeO_2$ 산화물의 미세구조 제어와 고온 안정 제어를 확인하고 특성을 평가하였다.