• The Plant Pathology Journal
• /
• 제17권1호
• /
• pp.45-51
• /
• 2001

A root rot/vine decline disease occurred naturally on bottle gourd-stocked watermelon, melon, oriental melon and squash grown in greenhouses, but not on these plants grown in fields. Self-rooted watermelon, cucumber, pumpkin and luffa were also proven to be hosts of the pathogen by artificial inoculation in this experiment. The pathogen was identified as Monosporascus cannonballus by comparing microscopic characteristics of fungal structures with those of previously identified fungal strains. Our field investigations showed that the temperature and electric conductivity of soil in infected greenhouses were higher and the soil moisture content was lower than in noninfected greenhouses. To investigate soil-environmental factors affecting disease development, greenhouse trials and inoculation experiments were conducted. The host plants inoculated and grown under conditions of high soil temperature and electrical conductivity ($35\pm2^{\circ}$, 3.2-3.5 mS) and with low soil moisture content (pF 3.0-4.5) were most severely damaged by the fungal disease. Since plants growing in greenhouses ae usually exposed to such environmental conditions, this may be the reason why the monosporascus root rot/vine decline disease has occurred only on cucurbits cultivated in greenhouses but not in field conditions.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1997년도 추계학술발표회 논문집
• /
• pp.86-100
• /
• 1997

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.5-12
• /
• 2001

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.92-99
• /
• 1999

High temperature and pressure materials in power plant are degraded by creep damage, if they are exposed to constant loads for long times, which occurs in load bearing structures of pressurized components operationg at elevated temperatures. Many conventional measurement techniques such as replica method, electric resistance method, and hardness test method for measuring creep damgage have been used. So far, the replica method is mainly used for the inspection of high temperature and pressure components. This technique is, however, restricted to applications at the surface of the testpieces and cannot be used to material inside. In this paper, ultrasonic evaluation for the detection of creep damage in the form of cavaties on grain boundaries or intergranular microcracks were carried out. And the absolute measuring method of quantitative ultrasonic velocity technique for Cr-Mo material degradation was analyzed. As a result of ultrasonic tests for crept for specimens, we founded that the sound velocity was decreased as increase of creep life fraction(${phi}c$) and also, confirmed that hardness was decreased as increase of creep life fraction(${phi}c$).

• 한국수산과학회지
• /
• 제48권1호
• /
• pp.76-81
• /
• 2015

The effects of temperature, photon irradiance, and photoperiod on the growth of Sargassum horneri embryos were examined for female plants collected at Chokpo in Tongyeoung, Gyeongnam Prefecture, Korea on 27 December 2011. Mature plant receptacles were detached, and fertilized eggs were cultured in the laboratory at temperatures of $5-25^{\circ}C$ with photon irradiances of $10-80{\mu}mol\;m^{-2}s^{-1}$ under 14L:10D and 10L:14D photoperiods. Germination and embryo growth were rapid at $20-25^{\circ}C$ and $40{\mu}mol\;m^{-2}s^{-1}$ under 14L:10D. The number of rhizoids in the germinated young thalli was high at high photon irradiances ($40-80{\mu}mol\;m^{-2}s^{-1}$) and $15-20^{\circ}C$. At $20^{\circ}C$ and 14L:10D, vigorous growth of main and lateral branches was observed; however, at $5^{\circ}C$ under both photoperiods, plant growth decreased markedly. In the present study, S. horneri grew well at high temperatures ($20-25^{\circ}C$) and high photon irradiances ($40-80{\mu}mol\;m^{-2}s^{-1}$) with a 14L:10D photoperiod.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.116-123
• /
• 2008

In the fossil power plant, the reliability of the components which consist of the many welded parts depends on the quality of welding. The residual stress is occurred by the heat flux of high temperature during weld process. This decreases the mechanical properties as the strength of fatigue and fracture or causes the stress corrosion cracking and fatigue fracture. Especially, the accidents due to the residual stress occurred at the weld parts of high-temperature and high-pressure pipes and steam headers. Also, the residual stress of the welded part in the recently constructed power plants has been brought into relief as the cause of various accidents. The aim of this study is the measurement of the residual stress using the x-ray diffraction method. The merits of this are more accurate and applicable than other methods. The materials used for the study is P92 steel for the use of high temperature pipe on super critical condition. The variables of tests are the post-weld heat treatment, the surface roughness and the depth from the original surface. The test results were analyzed by the distributed characteristics of the full width at half maximum intensity (FWHM) in x-ray diffraction intensity curve and by the relation of hardness with FWHM.

• 열처리공학회지
• /
• 제11권1호
• /
• pp.62-72
• /
• 1998

High carbon steel is used for rails due to the excellent wear resistance, however the welding of high carbon steel is more difficult than that of mild steel owing to the high hardenability and sensitivity to cracking at the weldment. In this study, the impact toughness and cracking behavior of a rail weldment were evaluated as function of preheating temperatures. Impact toughness were more excellent in the specimen welded with preheating temperature above $250^{\circ}C$ than that below $100^{\circ}C$, and cracks were not detected in the specimen welded with preheating temperature above $250^{\circ}C$.

• 한국작물학회지
• /
• 제33권4호
• /
• pp.343-349
• /
• 1988

보리 극조숙 품종을 육성하기 위하여 육종재료들에 대한 감온성 및 저온생육성을 검정하였다. 국내외 품종 및 계통을 공시하여 파종을 소거한 후 온실의 고온, 저온조건 및 포장에서 시험을 실시한 결과는 다음과 같다. 1. 온도처리에 따른 초장의 온도계수(Q$_{10}$), 생육비율, 감온성정도는 품종간 변이가 컸다. 조숙성 품종은 Q$_{10}$ 치가 커서 온도변화에 둔감한 생육반응을 보였다. 2. 온도변화에 대한 지엽전개기의 온도계수(Q$_{10}$), 감온성정도 역시 품종간 변이가 컸으나 감온성정도의 변이계수가 더 크므로 품종간 차이를 조사하기 위해선 이 형질의 이용이 더 효과적으로 보여진다. 3. 지엽전개기에 대한 Q$_{10}$ 및 감온성정도는 초장에 대한 Q$_{10}$, 감온성정도와 상관이 인정되지 않았다. 4. 출수에서 개화까지의 기간은 고온에서 2~4일로 짧았으나 저온구에서 는 1~11일로 그 변이가 매우 크게 나타났다. 5. 고온에서의 출수기와 저온에서의 출수기, 포장출수기, 성숙기와는 정의 상관을 나타냈고 저온에서의 개화기는 고온에서 출수기, 포장출수기, 성숙기와는 상관을 나타냈다. 6. 대체로 저온과 고온구간에 출수기의 차이가 큰 품종은 수원218호. SB76588, 5월보리. 조강보리 등으로 감온성이 민감하고 조숙성 품종군에 속하였다.품종군에 속하였다.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2015년도 하계 학술발표논문집
• /
• pp.70-73
• /
• 2015

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.140-147
• /
• 2003

As the huge energy transfer systems like as nuclear power plant and steam power plant are operated for a long time at a high temperature, mechanical properties are changed and ductile-brittle transition temperature is raised by degradation. So it is required to estimate degradation in order to assess the safety, remaining life and further operation parameters. The sub-sized specimen test method using surveillance specimen was developed for evaluating the integrity of metallic components. In this study, we would like to present the evaluation technique of the ductile-brittle transition temperature by the sub-sized specimen test. The four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method. The tensile test and fracture toughness test were performed. The results of the fracture toughness tests using the sub-sized specimens were compared with the evaluation technique of the ductile-brittle transition temperature.