• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.10-10
• /
• 2008

Silicide is inevitable for CMOSFETs to reduce RC delay by reducing the sheet resistance of gate and source/drain regions. Ni-silicide is a promising material which can be used for the 65nm CMOS technologies. Ni-silicide was proposed in order to make up for the weak points of Co-silicide and Ti-silicide, such as the high consumption of silicon and the line width limitation. Low resistivity NiSi can be formed at low temperature ($\sim500^{\circ}C$) with only one-step heat treat. Ni silicide also has less dependence of sheet resistance on line width and less consumption of silicon because of low resistivity NiSi phase. However, the low thermal stability of the Ni-silicide is a major problem for the post process implementation, such as metalization or ILD(inter layer dielectric) process, that is, it is crucial to prevent both the agglomeration of mono-silicide and its transformation into $NiSi_2$. To solve the thermal immune problem of Ni-silicide, various studies, such as capping layer and inter layer, have been worked. In this paper, the Ni-silicide utilizing Pd stacked layer (Pd/Ni/TiN) was studied for highly thermal immune nano-scale CMOSFETs technology. The proposed structure was compared with NiITiN structure and showed much better thermal stability than Ni/TiN.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.3
• /
• pp.221-226
• /
• 2010

Swine wastewater contains high amounts of organic matter and nutrients (nitrogen and phosphorus). The biological nitrogen removal can be achieved by nitrification and denitrification processes. Nitrification-denitrification can be performed via nitrite which is called as the short-cut process. This Short-cut process saves up to 25% of oxygen and 40% of external carbon during nitrification and denitrification. In this study, the batch tests were conducted to assess the different parameters for the nitrite sulfur utilizing denitrification, such as alkalinity, temperature, initial nitrite concentration, and dissolved oxygen. The experimental results showed that the nitrite removal efficiency of the reactor was found to be over 95% under the optimum condition ($30^{\circ}C$ and sufficient alkalinity). Autotrophic nitrate denitrification was inhibited at low alkalinity condition showing only 10% removal efficiency, while nitrite denitrification was achieved over 95%. The nitrite removal rates were found similar at both $20^{\circ}C$ and $30^{\circ}C$. In addition, nitrite removal efficiencies were inhibited by increasing oxygen concentration, but sulfate concentration increased due to sulfur oxidation under an aerobic condition. Sulfate production and alkalinity consumption were decreased with nitrite compared those with nitrate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.58-58
• /
• 1999

The diamond films which can be applied to SOD (silicon-on-diamond) structure were deposited on Si(100) substrate using CO/H2 CH4/H2 source gases by microwave plasma chemical vapor deposition(MPCVD), and SOD structure have been fabricated by poly-silicon film deposited on the diamond/Si(100) structure y low pressure chemical vapor deposition(LPCVD). The phase of the diamond film, surface morpholog, and diamond/Si(100) interface were confirmed by X-ray diffraction(XRD), scanning electron microscopy(SEM), atomic force microscopy(AFM), and Raman spectroscopy. The dielectric constant, leakage current and resistivity as a function of temperature in films are investigated by C-V and I-V characteristics and four-point probe method. The high quality diamond films without amorphous carbon and non-diamond elements were formed on a Si(100), which could be obtained by CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5%, respectively. The (111) plane of diamond films was preferentially grown on the Si(100) substrate. The grain size of the films deposited by CO/H2 are gradually increased from 26nm to 36 nm as deposition times increased. The well developed cubo-octahedron 100 structure nd triangle shape 111 are mixed together and make smooth and even film surface. The surface roughness of the diamond films deposited by under the condition of CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5% were 1.86nm and 3.7 nm, respectively, and the diamond/Si(100) interface was uniform resistivity of the films deposited by CO/H2 concentration ratio of 15.3% are obtained 5.3, 1$\times$10-9 A/cm, 1 MV/cm2, and 7.2$\times$106 $\Omega$cm, respectively. In the case of the films deposited by CH4/H2 resistivity are 5.8, 1$\times$10-9 A/cm, 1 MV/cm, and 8.5$\times$106 $\Omega$cm, respectively. In this study, it is known that the diamond films deposited by using CO/H2 gas mixture as a carbon source are better thane these of CH4/H2 one.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.26-31
• /
• 2002

Bromotrifluoromethane(halon-1301) and bromochlorodifluoromethane(halon-1211) have been widely used as a clean fire extinguishing agents due to their outstanding properties. However, production and use of halon are currently being phased out under an international agreements Montreal Protocol because of global environmental concerns and HFCs have been considered as promising alter-natives for the replacement of halon since their ozone depletion potentials are low. The vapor-liquid equilibrium data are required as important basic information in evaluating the solubility of clean fire extinguishing agents and determining their optimal compositions. In this work, we chose HFCs such as HFC-22 HFC-125, and HFC-l34a for gaseous fire extinguishing agents and nitrogen as a pressurization gas for a proper jet velocity of these agents. Phase equilibria for binary mixtures of nitrogen/HFC-22, nitrogen/HFC-125, and nitrogen/HFC-l34a were measured in the temperature range from 283.15K to 303.15K. For equilibrium measurement, we used a circulation type apparatus in which both vapor and liquid phases were continuously recirculated. The experimental data were relatively well correlated with the Peng-Robinson equation of state with Wong-Sandier mixing rules.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.556-562
• /
• 2007

A total of 126 crossbred weanling pigs (average body weight of $6.3{\pm}0.3$ kg) were used to investigate the effect of chito-oligosaccharide (COS) on growth performance, nutrient digestibility, pH of gastro-intestinal tract (GI), intestinal and fecal microflora of young piglets. Pigs were allocated to three dietary treatments based on body weight and gender in a single factorial arrangement. Treatments were control (No COS), T1 (0.2% COS during starter (6-13 kg) and 0.1% COS during grower (13-30 kg) phases, and T2 (0.4% COS during starter (6-13 kg) and 0.3% COS during grower (13-30 kg) phases, respectively. Each treatment had 3 replicates and 14 pigs were raised in each pen. COS is a low molecular weight water-soluble chitosan that can be obtained from chitin of the crab shell after deacetylation with concentrated sodium hydroxide at high temperature and then further decomposition by chitosanase enzyme in the presence of ascorbic acid. For the starter and grower periods, there were no significant differences (p>0.05) in average daily gain (ADG) and feed to gain ratio among treatments. However, during the overall period (6-30 kg), T2 showed better (p<0.05) feed to gain ratio than other treatments. A digestibility study was conducted at the end of grower phase which showed improvement (p<0.05) in DM and crude fat digestibility in T2 over the control. At 25 kg body weight, 6 pigs per treatment (2 per replicate) were sacrificed to determine the effect of diets on pH and microbial count at different sections of the GI tract. The pH of the cecal contents in pigs fed 0.1% COS was higher (p<0.05) than in the other treatments. Total anaerobic bacterial number increased from cecum to rectum in all treatments. The weekly total bacterial counts showed higher (p<0.05) in feces of pigs fed COS than that of untreated pigs at the $8^{th}$ week. The number of fecal E. coli in untreated pigs at $4^{th}$ wk was 7.35 log CFU/g compared to 6.71 and 6.54 log CFU/g in 0.1 and 0.3% COS-treated pigs, respectively. Similarly, at $8^{th}$ wk, fecal clostridium spp. were lower in pigs fed 0.3% COS (5.43 log CFU/g) than in untreated pigs (6.26 log CFU/g). In conclusion, these results indicated that chito-oligosaccharide could improve feed efficiency in young pigs and inhibited the growth of harmful bacteria.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.174-183
• /
• 2001

During the rapid phase of gonadal development of the freshwater teleost, the catfish (Silurus asotus), the influence of hCG upon the inducement of final oocyte maturation and spawning was investigated electrophoretically and ultrastructurally. The electrophoretic patterns obtained were different in the presence and absence of some of the major or minor zones, because of the hormone level in catfish. The vitellogenin of hormone-treated fish was stained more intensively than that of sham-treated fish. These proteins showed some minor or main bands of egg extracts which migrated at positions corresponding to molecular weights of approximately 90,000. However, the thickness of electrophoretic band in molecular weight for hCG-treated fish was slightly lower than that for saline control. It seemed the plasma protein with molecular weight of approximately 45,000 in hCG-treated fish disappeared. In contrast to the control fish, the ovaries in the catfish treated with hCG shows a marked ultrastructural change under the electron microscope. No dilated profiles were seen in the granulosa cells of the mature oocyte before ovulation. After germinal vesicle breakdown (GVBD), the zona radiata interna (ZRI) becomes more compact, and there is a loss of all the processes from the pore canals. There is a wide space between the vitelline membrane and zona radiata. Also, during final maturation, the microvillar processes from the oocyte are seen no longer to penetrate deeply into the extracellular spaces of the overlying granulosa cells, and the reticulate patterns of the zona radiata interna becomes occluded, giving the zona radiata a more solid appearance. It has been possible to initiate 100% oocyte maturation in yolk granules and follicles in vivo by treatment with hCG and a high water temperature ($27^{\circ}C$). In hCG-treated fish, the percentages of successful artificial fertilization and hatching were maximal at 15 h after a single injection. It seems clear that a long acting preparation containing hCG can be successfully used in prespawning fish to advance the final events of gonadal maturation and initiate spawning. Further studies are necessary to evaluate the potential of hCG to either stimulate or inhibit the reproductive development of fish at other stages of the seasonal reproductive cycle.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.758-766
• /
• 2015

Dextran is a generic term for a bacterial exopolysaccharide synthesized from sucrose and composed of chains of D-glucose units connected by ${\alpha}$-1,6-linkages by using dextransucrases. Dextran could be used as vicosifying, stabilizing, emulsifying, gelling, bulking, dietary fiber, prebiotics, and water holding agents. We isolated new strain capable of producing dextran from Korean traditional kimchi and identified as Leuconostoc sp. strain JYY4. Batch fermentation was conducted in bioreactor with a working volume of 3 L. The media was MMY and 15% (w/v) sucrose. Mineral medium consisted of $3.0g\;KH_2PO_4$, $0.01g\;FeSO_4$, $H_2O$, $0.01g\;MnSO_4$, $4H_2O$, $0.2g\;MgSO_4\;7H_2O$, 0.01 g NaCl, $0.05g\;CaCl_2$ per 1 liter deionized water. The pH of media was initially adjusted to 6.0. The inoculation rate was 1.0% (v/v) of the working volume. Temperature was maintained at $28^{\circ}C$. The agitation rate was 100 rpm. The production pattern of dextran was associated with the cell growth. After 24 hr dextran reached its highest concentration of 59.4 g/L. The sucrose was consumed completely after 40 hr. Growth reached stationery phase when sucrose became limiting, regardless of the presence of fructose or mannitol. When the specific growth rate was 0.54 hr-1, utilization averaged 5.8 g/L-hr. The yield and productivity of dextran were 80% and 2.0 g/L-hr, respectively. Dextrans produced by were separated to two different size by an alcohol fraction method. The size of high molecular weight dextran (45% alcohol, v/v), less soluble dextran, was between MW 500,000 and 2,000,000. Soluble dextran (55% alcohol, v/v) was between 70,000 and 150,000. The molecular weight average of total dextran (70% alcohol, v/v) was between 150,000 to 500,000. The enzymatic hydrolyzates of total dextran of ATCC 13146 showed branched dextrans by Penicillium dextranase contained of glucose, isomaltose, isomaltotriose, and isomaltooligosaccharides greater than DP4 (degree of polymerization) that had branch points. Compounds greater than DP4 were branched isomaltooligosaacharides. Hydrolysates by the Lipomyces dextranase produced the same composition of oligosaccharides as those by Penicillin dextranase.

• Korean Journal of Materials Research
• /
• v.23 no.6
• /
• pp.309-315
• /
• 2013

$GdBa_2Cu_3O_{7-y}$(Gd123) powders were synthesized by the solid-state reaction method using $Gd_2O_3$ (99.9% purity), $BaCO_3$ (99.75%) and CuO (99.9%) powders. The synthesized Gd123 powder and the Gd123 powder with $Gd_2O_3$ addition ($Gd_{1.5}Ba_2Cu_3O_{7-y}$(Gd1.5)) were used as raw powders for the fabrication of Gd123 bulk superconductors. The Gd123 and Gd1.5 bulk superconductors were fabricated by sintering or a top-seeded melt growth (TSMG) process. The superconducting transition temperature ($T_{c,onset}$) of the sintered Gd123 was 93 K and the transition width was as large as 20 K. The $T_{c,onset}$ of the TSMG processed Gd123 was 82 K and the transition width was also as large as 12 K. The critical current density ($J_c$) at 77 K and 0 T of the sintered Gd123 and TSMG processed Gd123 were as low as a few hundreds A/$cm^2$. The addition of 0.25 mole $Gd_2O_3$ and 1 wt.% $CeO_2$ to Gd123 enhanced the $T_c$, $J_c$ and magnetic flux density (H) of the TSMG processed Gd123 sample owing to the formation of the superconducting phase with high flux pinning capability. The $T_c$ of the TSMG processed Gd1.5 was 92 K and the transition width was 1 K. The $J_cs$ at 77 K (0 T and 2 T) were $3.2{\times}10^4\;A/cm^2$ and $2.5{\times}10^4\;A/cm^2$, respectively. The H at 77 K of the TSMG-processed Gd1.5 was 1.96 kG, which is 54% of the applied magnetic field (3.45 kG).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.2
• /
• pp.174-181
• /
• 1988

A comparison was made the differences of growth and some yield components of two soybean ecotypes (summer and two autumn types) at different planting dates (15 April, 15 May, and 15 June) and also made the different patterns of dry matter accumulation of one summer type and two autumn types of soybeans at Agricultural Experiment Farm, College of Agriculture, Dankook University, Cheonan City, in 1987. [Planting date experiment] Days to emergence of four varieties were observed no difference. and, therefore, it was speculated that field observation of the difference of cold tolerence between varieties was difficult. Shortening rate of flowering clays as planting dates delayed was no different between two ecotypes, summer vs. autumn types of soybean. Summer types, DN82029-3 and ES18085-1, were observed not greater difference of days to maturity between early and late planting dates as compared with that of autumn types, Changyeobkong and Paldalkong. At late planting, summer types were observed more to hasten days to ripening due to high temperature in late growing season than that of autumn types. This caused to decrease somewhat greater rate of some yield componments, and finally yield as planting date delayed. As compared to autumn types, summer types, DN82029-3 and ES18085-1 showed longer stem height and lower airdry weight at late planting. [Dry matter accumulation pattern] Stem elongation after flowering of three varieties, DN82029-3, Changyeobkong and Danyeobkong, ranged 17 to 32 cm and increment of leaf area index 0.83-1.53. DN82029-3 reached 49 days faster in maximum total dry weight than that of autumn types, Changyeobkong and Danyeobkong. However. maximum total dry weight of DN82029-3 showed 50% to autumn types. At 15 May planting, summer type, day-neutrality, transfered faster into reproductive growth phase without enough growth of vegetative growth and also hastened ripening days, and thus lower dry matter accumulation and finally lower yield.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.474-484
• /
• 2005

Biological treatment is a promising alternative to conventional air pollution control methods. Bioreactors for air pollution control have found most of their success in the treatment of dilute and high flow waste air streams containing volatile organic compounds and odor compounds. They offer several advantages over traditional technologies such as incineration or adsorption. These include lower treatment costs, absence of formation of secondary pollutants, no spent chemicals, low energy demand and low temperature treatment. The most widely used bioreactor for air pollution control is biofilter, but it has several limitations. In the past years major progress has been accomplished in the development of vapor phase bioreactor, in particular biotrickling filters. Biotrickling filters are more complex than biofilters, but are usually more effective, especially for the treatment of compounds which are difficult to degrade or compounds that generate acidic by-products. While the level of understanding of biotrickling filtration process for VOCs still remains limited, the evident success of biotreatment of VOC in air stimulated the pursue of acitve research. This paper presents fundamental and theoretical/practical aspect of air pollution control in biotrickling filter. Special emphasis is given to the operating parameters and the factors influencing performance for air pollution control in biotrickling filter.