• 멤브레인
• /
• 제16권4호
• /
• pp.268-275
• /
• 2006

이온전도도가 높은 상온 이온액을 이용하여 저온, 고온 상분리에 의한 multi-stage phase separation process로 새로운 고정화 이온액 전해질 막(supported ionic liquid electrolyte membranes, SILEMs)을 제조하였다. PVDF와 imidazolium계 이온액을 각각 분리막 소재와 전해액으로 사용하였다. 이온전도도 특성을 알아보기 위해 SILEMs을 LCR meter를 이용 해 $30^{\circ}C$부터 $130^{\circ}C$까지 실험하였다. 가습조건에서 cast Nafion 막의 이온전도도는 $30^{\circ}C$부터 $100^{\circ}C$까지는 직선적으로 증가하였으나 그 이후에는 감소하였다. 그러나 SILEMs의 경우 운전온도의 증가에 따라 이온전도도가 증가하였다. 또한 SILEMs의 이온전도도 거동은 가습과 관계없이 거의 같았다. SILEMs의 이온전도도는 $30^{\circ}C$에서 $2.7{\times}10^{-3}S/cm$이었고 온도가 $130^{\circ}C$까지 증가함에 따라 $2.2{\times}10^{-2}S/cm$까지 거의 직선적으로 증가하였다. $SiO_2$를 이용하여 SILEMs의 물리적 성질에 대한 무기첨가제의 영향에 관하여 연구하였다. SILEMs에 $SiO_2$의 첨가는 비록 약간의 이온전도도 감소는 있으나 SILEMs의 기계적 강도를 향상시킬 수 있었다.

• 미생물학회지
• /
• 제24권4호
• /
• pp.370-376
• /
• 1986

From the outer membrane portion of Gram-negative Klebsiella pneumoniae, the activity of 2-furaldehyde dehydrogenase depending upon beta-nicotinamide adenine dinucleotide was detected. Cytoplasmic membrane was preferentially extracted from crude membrane with $Mg^{2+}$ and Triton X-100, and then outer membrane was collected by ultracentrifugation. The crude enzyme was obtained by solubilization of outer membrane with lysozyme, ethylene diamine tetraacetate and Triton X-100. Thereafter 2-furaldehyde dehydrogenase was partially purified through column chromatography on QAE-Sephadex Q-50 and Sephadex G-150 and the enzyme activity was analyzed by means of high performance liquid chromatography. The optimal pH for the activity of the enzyme was about 9.5 and the optimal temperature was about $85^{\circ}C$. The partially purified enzyme retained tis activity at $85^{\circ}C$ for 5 hours. The optimal concentration of Triton X-100 for the activity of the enzyme was about 1.5% in the reaction mixture.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.437-448
• /
• 2017

A high quality Na-X zeolite membrane was synthesized on a seeded ${\alpha}-alumina$ disc by the secondary growth method. Structural characterization was done by X-ray spectroscopy, FT-IR spectroscopy, SEM and AFM imaging. The performance evaluation of the membrane was firstly tested in separation of glucose/water solutions by pervaporation process. There was obtained a separation factor $182.7{\pm}8.8$, while the flux through the membrane was $3.6{\pm}0.3kg\;m^{-2}\;h^{-1}$. The zeolite membrane was then used for desalination of aqueous solutions consisting of $Na^+$, $Ca^{2+}$, $Cs^+$ and $Sr^{2+}$ because of the importance of these ions in water and wastewater treatments. The effects of some parameters such as temperature and solution concentration on the desalination process were studied for investigating of diffusion/adsorption mechanism in membrane separation. Finally, high water fluxes ranged from 2 up to $9kg\;m^{-2}\;h^{-1}$ were obtained and the rejection factors were resulted more than 95% for $Na^+$ and $Ca^{2+}$ and near to 99% for $Cs^+$ and $Sr^{2+}$. Based on the results, fluxes were significantly improved due to convenient passage of water molecules from large pores of NaX, while the fouling was declining dramatically. Based on the results, NaX zeolite can efficiently use for the removal of different cations from wastewaters.

• 멤브레인
• /
• 제19권1호
• /
• pp.1-6
• /
• 2009

수소에너지는 풍부한 자원으로부터 얻을 수 있는 2차 청정에너지로서 연소 및 반응 생성물이 환경을 오염시키지 않을 뿐만 아니라 에너지의 수송 및 저장이 용이한 화학적 매체이다. 물의 전기분해를 이용한 수소제조는 오염을 유발시기지 않으면서도 영구적인 재생에너지 시스템으로 이용할 수 있다. 고온 수증기전해의 핵심기술은 분해된 산소 또는 프로톤 이온이 전해질을 통해 신속하게 전달될 수 있는 전해질의 개발이 제1 핵심요건이며, 이어서 전류효율에 큰 영향을 미치는 전해질막과 전극재료의 접합기술의 확보가 중요한 핵심 요소기술이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.149-149
• /
• 2009

Generally, Nafion ionomer is used in the polymer electrolyte fuel cell (PEFC) electrodes to achieve high power density. At the high temperature operation of PEFC, however, ionic conductivity of Nafion remarkably decreased due to the evaporation of water in Nafion polymer. Recently, many researchers have focused on using the Ionic Liquids(ILs) instead of water in Nafion polymer. ILs have intrinsic properties such as good electrochemical stability, high ionic conductivity, and non-flammability. Especially, ILs play a crucial role in proton conduction by the Grottuss mechanism and act as water in water-free Nafion polymer. However, it was found that the ILs was leached out of the polymer matrix easily. In this study, we prepared membrane electrode assemblies with various contents of ILs. The effect of ILs in the electrode of each designed was investigated by a cyclic voltammetry measurement and the cell performance obtained through a single cell test using H2/Air gases. Electrodes with different contents of ILs in catalyst layer were examined at high temperature and low humidified condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.147-147
• /
• 2010

An electrolyte membranes for high temperature/low humidity is a demand for the proton exchange membrane fuel cells (PEMFCs). In this work, we prepared hybrid membranes, which have novel glass content in the hydrophilic and hydrophobic part of sulfonated poly(arylene ether sulfone) (SPAES) by in-situ sol-gel synthesis of various functional silane. The effect of silicate from functional silane content on the proton conductivity, water uptake of the hybrid membranes under high temperature and low humidity was quantitatively identified. The silicate content contributed to the enhancement of not only proton conductivity, but also water retention ability for PEMFCs operation.

• 상하수도학회지
• /
• 제31권4호
• /
• pp.303-310
• /
• 2017

Pressure retarded osmosis(PRO) has attracted much attention as potential technology to reduce the overall energy consumption for reverse osmosis(RO) desalination. The RO/PRO hybrid process is considered as the most logical next step for future desalination. The PRO process aims to harness the osmotic energy difference of two aqueous solutions separated by a semipermeable membrane. By using the concentrated water(RO brine) discharged from existing RO plants, the PRO process can effectively exploit a greater salinity gradient to reduce the energy cost of processing concentrated water. However, in order to use RO brine as the draw solution, PRO membrane must have high water flux and enough mechanical strength to withstand the high operational pressure. This study investigates the development of a thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on the overall power density was studied using the characteristic factors of PRO membranes. Finally, the performance test of an 8-inch spiral wound module was carried out under various operating conditions(i.e. hydraulic pressure, flow rate, temperature). As the flow rate and temperature increased under the same hydraulic pressure, the PRO performance increased due to the growth of water permeability coefficient and osmotic pressure. For a high performance PRO system, in order to optimize the operating conditions, it is highly recommended that the flow pressure be minimized while the flow rate is maintained at a high level.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.195-206
• /
• 2003

Polymer electrolyte membrane fuel cells(PEMFC) are very interesting power source due to high power density, simple construction and operation at low temperature. But they have problems such as high cost, improvement of performance and effect of temperature. This problems can be approached using mathematical models which are useful tools for analysis and optimization of fuel cell performance and for heat and water management, in this paper, transient model consists of various energy terms associated with fuel cell operation using the mass and energy balance equation. And water transfer in the membrane is composed of back diffusion and electro-osmotic drag. The temperature calculated by transient model approximately agreed with the temperature measured by experiment in constant current condition.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.340-346
• /
• 2014

Continuous and dense ZIF-7 membranes were successfully synthesized on ${\alpha}-Al_2O_3$ porous substrate via two-step crystallization technique. ZIF-7 seeding layer was first deposited on porous ${\alpha}-Al_2O_3$ substrate by in-situ low temperature crystallization, and then ZIF-7 membrane layer can be grown through the secondary high-temperature crystallization. Two synthesis solutions with different concentration were used to prepare ZIF-7 seeding layer and membrane layer on porous ${\alpha}-Al_2O_3$ substrate, respectively. As a result, a continuous and defect-free ZIF-7 membrane layer can be prepared on porous ${\alpha}-Al_2O_3$ substrate, as confirmed by scanning electron microscope. XRD characterization shows that the resulting membrane layer is composed of pure ZIF-7 phase without any impurity. A single gas permeation test of $H_2$, $O_2$, $CH_4$ or $CO_2$ was conducted based on our prepared ZIF-7 membrane. The ZIF-7 membrane exhibited excellent H2 molecular sieving properties due to its suitable pore aperture and defect-free membrane layer.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.53-62
• /
• 2018

In this study, vacuum membrane distillation (VMD) was used to treat high-salinity wastewater (concentration about 17%) discharged by chlor-alkali plant after resin regeneration. The feasibility of VMD for the treatment of real saline wastewater by using Polyvinylidene fluoride (PVDF) microporous plate membrane with a pore diameter of $0.2{\mu}m$ was investigated. The effects of critical operating parameters such as feed temperature, velocity, vacuum degree and concentration on the permeate water flux were analyzed. Numerical simulation was used to predict the flux and the obtained results were in good agreement with the experimental data. The results showed that an increase in the operating conditions could greatly promote the permeate water flux which in turn decreased with an increase in the concentration. When the concentration varied from 17 to 25%, the permeate water flux dropped marginally with time indicating that the concentration was not sensitive to the decrease in permeate water flux. The permeate water flux decreased sharply until zero due to the membrane fouling resistance as the concentration varied from 25 to 26%. However, the conductivity of the produced water was well maintained and the average value was measured to be $4.98{\mu}s/cm$. Furthermore, a salt rejection of more than 99.99% was achieved. Overall, the outcome of this investigation clearly indicates that VMD has the potential for treating high-salinity wastewater.