• Title/Summary/Keyword: High temp

Search Result 104, Processing Time 0.021 seconds

Varietal response in tobacco under photoperiodic and temperature Conditions (일장 및 온도조건에 따르는 잎담배 품종간 반응)

  • Il Hou;Y. D. Lee;Eun-Woong Lee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.8 no.1
    • /
    • pp.111-115
    • /
    • 1970
  • 1. Eight Varieties of Nicotiana tabacum, "Yellow special A", "Gold leaf", "Oxford, " "Awha", "Yungzung", "Samsun", "Maruha" and "Hatano" were compared on the photoperiodic responses. 2. Experiments were conducted both under high temp. condition(green-house, average temp $25^{\circ}C$-$35^{\circ}C$) and low temp. condition (out-door; average temp $10^{\circ}C$-$25^{\circ}C$) in four plots of 8.10.12 and 14 hours in day length. 3. The results obtained are summarized as follows; i) In the short day condition, the flowering was accelerated in the low temp. than high. On the contrary, in the high temp, it was accelerated in the long day. ii) Generally speaking, the flowering was responsed more in low temp. and short day length than high temp.-long day. iii) But the above trend was found great difference among varieties..-long day. iii) But the above trend was found great difference among varieties.

  • PDF

Growth Response and $CO_2$ Biomass of Chinese Cabbage and Radish under High Temperature and $CO_2$ Concentration (고온과 고농도 $CO_2$ 조건에서 배추와 무의 생육 반응 및 탄소 고정량)

  • Lee, Ji-Weon;Kim, Seung-Yu;Jang, Yoon-Ah;Moon, Ji-Hye;Lee, Woo-Moon
    • Journal of Bio-Environment Control
    • /
    • v.15 no.4
    • /
    • pp.364-368
    • /
    • 2006
  • This experiment was carried out to figure out the $CO_2$ biomass and the growth response of Chinese cabbage and radish grown under the condition of high temperature and high $CO_2$ concentration to provide the information for the coming climatic change. Chinese cabbage and radish were cultivated in spring and autumn seasons under 4 treatments, 'ambient temp.+ambient $CO_2$ conc.', 'ambient temp.+elevated $CO_2$ conc.', 'elevated temp.+ ambient $CO_2$ conc.', and 'elevated temp. +elevated $CO_2$ conc.'. The 'elevated temp,' plot was maintained at 5 higher than 'ambient temp. (outside temperature)'and the 'elevated $CO_2$ cone.' plot was done in 650 ppm $CO_2$. The growth of spring-sown Chinese cabbage was worse than autumn-sown one, and was affected more by high temperature than high $CO_2$. concentration. The $CO_2$ biomass of Chinese cabbage was lower as 25.1-39.1 g/plant in spring-sown one than 54.8-63.4 g/plant of autumn-sown one. Daily $CO_2$2 fixation ability was not significantly different between spring- and autumn-sown Chinese cabbage as 1.9-2.9, 2.7-3.1 kg/10a/day, respectively. The $CO_2$ biomass of radish were 87.4-104.6 /plant in spring-sown one and 51.3$\sim$76.4 g/plant in autumn-sown one. Daily $CO_2$ fixation ability of radish were 6.2-10.1 kg/10a/day in spring-sown one and 4.6-6.9 kg/10a/day in autumn-sown one.

Effect of TempCore Processing on Microstructure and Mechanical Properties of 700 MPa-Grade High-Strength Seismic Resistant Reinforced Steel Bars (700 MPa급 고강도 내진 철근의 미세조직과 기계적 특성에 미치는 템프코어 공정의 영향)

  • Shin, S.H.;Kim, S.K.;Lim, H.G.;Hwang, B.
    • Transactions of Materials Processing
    • /
    • v.30 no.2
    • /
    • pp.91-98
    • /
    • 2021
  • The present study deals with the microstructure and mechanical properties of 700 MPa-grade high-strength seismic resistant reinforced steel bars fabricated by various TempCore process conditions. For the steel bars, in the surface region tempered martensite was formed by water cooling and subsequent self-tempering during TempCore process, while in the center region there was ferrite-pearlite or bainite microstructure. The steel bar fabricated by the highest water flow and the lowest equalizing temperature had the highest hardness in all regions due to the relatively fine microstructure of tempered martensite and bainite. In addition, the steel bar having finer microstructures as well as the high fraction of tempered martensite in the surface region showed the highest yield and tensile strengths. The presence of vanadium precipitates and the high fraction of ferrite contributed to the improvement of seismic resistance such as high tensile-to-yield strength ratio and high uniform elongation.

The Effects of Season on Physiological Responses of Human Body, Clothing Microclimate, and Subjective Sensations (인체의 생리적 반응과 의복 기후, 주관적 감각에 미친 계절의 영향)

  • 김양원
    • Journal of the Korean Home Economics Association
    • /
    • v.30 no.4
    • /
    • pp.15-26
    • /
    • 1992
  • To investigate the seasonal effects on physiological responses of human body, clothing micro-climate, and subjective sensation, selected the cloths the most frequently dressed by men in spring and fall, and completed wearing trials in the climatic chamber. The results are as follows: 1. Rectal temp. ranged 36.8-37.1$^{\circ}C$ in either spring or fall, and no seasonal effect was found. 2. In skin temp., there was no seasonal effect in forehead, abdomen, and forearm. Skin temp. of chest was higher in spring than in fall. On the contrary, reverse was true in high and leg. Average skin temp. ranged 32.2-33.2$^{\circ}C$ in spring and 32.9-34.$0^{\circ}C$ in fall. 3. Average total sweat rate of spring, 79.4g/hr, was smaller than that of fall, 110.9g/hr. 4. Clothing temp. ranged 28.1-32.8$^{\circ}C$ in spring and 27.6-31.$0^{\circ}C$ in fall. Clothing humidity ranged 36.9-48.9% in spring and 38.2-51.1% in fall. Therefore, clothing microclimate was higher during fall than during spring. As results, skin temp. of the body core except chest did not show seasonal variation, but there was obvious seasonal variation in skin temp. of the extremities. Therefore, seasonal variation should be take into consideration in the experiments related to the cloth. In addition, standard for each season and the degree of work performance should be re-established in clothing micro-climate.

  • PDF

Effects of Hydrolysis Temperature on the Distribution of the Molecular Weights of Alginates Prepared from Sea Tangle, Laminaria japonica (다시마 Laminaria iaponicus 알긴산의 분자량 분포에 미치는 가수분해 온도의 영향)

  • Lim, Yeong-Seon;You, Byeong-Jin
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.40 no.4
    • /
    • pp.187-192
    • /
    • 2007
  • To prepare oligouronic acids from high-molecular-weight alginates prepared from sea tangle (Laminaria japonica), the alginates were hydrolyzed at various temperatures for 1 hr at pH 5.0. The effects of hydrolysis temperature $(H_{Temp})$ on the average molecular weight (AMW) and distribution ratio of MW (DR) in the hydrolyzed alginates were investigated. As $(H_{Temp})$ increased, the AMW of the alginates decreased exponentially; in addition the DR of the alginates with MW>500 kDa decreased exponentially, while the DR of those with MW=50-100 and MW<50 kDa increased exponentially. For the alginates with MW=300-500 and MW=100-300 kDa the DR increased exponentially until $H_{Temp}$ reached $80^{\circ}C$, and then decreased exponentially at above $80^{\circ}C$. AS $H_{Temp}$ increased, the MW cutoff size and AMW Of the alginates fraction With the highest DR both decreased. For $H_{Temp}<60^{\circ}C$, the MW cutoff size with the highest DR was MW>500 kDa; the DR was 39-67% and the AMW 1,000-1,300 kDa. For $H_{Temp}$ $80^{\circ}C$, the MW cutoff size with the highest DR was MW=300-500 kDa and the DR was about 33% and the AMW about 400 kDa. For $H_{Temp}\;100-121^{\circ}C$, the MW cutoff size with the highest DRs was MW=50-100 kDa, with a DR of 39-44% and an AMW of 70-80 kDa.

Evaluation and Comparison with Standard 48 hr Acute Bioassay and High Temperature Rapid Toxicity Test for Sewage Toxicity Test (하수의 독성평가를 위한 표준독성시험법과 온도증가 단기독성평가법의 비교 평가)

  • Lee, Sang-Ill;Jun, Byong-Hee;Weon, Seung-Yeon;Kim, Yi-Jung;Kim, Keum-Yong
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.2
    • /
    • pp.191-197
    • /
    • 2005
  • A new method, ToxTemp (TOXcity test based on TEMPerature control) using Ceridaphnia dubia was applied to evaluate the toxicity of insecticide materials and compared with the standard 48 hr acute bioassay. BPMC, diazinon and fenitrothion may cause the inhibition to the biological process in sewage treatment plant and need to detect toxicity within short contact time. The ToxTemp method showed sensitive detection with more shorter contact of 1-1.5 hr time than that of the standard 48 hr acute bioassay. To evaluate toxicity of real wastewater/sewage, the inhibition rate of nitrification and oxygen uptake rate (OUR) using activated sludge, the standard 48hr acute bioassay and ToxTemp method using C. dubia were compared, respectively. On the basis of the inhibition rate of nitrification, the OUR test showed the less sensitive results at the relatively strong toxic sewage. On the other hands, the standard 48hr acute bioassay and ToxTemp method using C. dubia represented the toxicity of each wastewater/sewage with high sensitivity. Even the slightly low (about 1.5%) sensitivity, the ToxTemp method showed the high applicability to the real site of sewage treatment plant.

Dispersion Stability and Mechanical Properties of ZrO2/High-temp Composite Resins by Nano- and Micro-particle Ratio for Stereolithography 3D Printing (나노 및 마이크로 입자 비율에 따른 광조형 3D 프린팅용 ZrO2/High-temp 복합 수지의 분산 안정성 및 기계적 특성)

  • Song, Se Yeon;Park, Min Soo;Yun, Ji Sun
    • Korean Journal of Materials Research
    • /
    • v.29 no.4
    • /
    • pp.221-227
    • /
    • 2019
  • This study examines the role of the nano- and micro-particle ratio in dispersion stability and mechanical properties of composite resins for SLA(stereolithography) 3D printing technology. VTES(vinyltriethoxysilane)-coated $ZrO_2$ ceramic particles with different nano- and micro-particle ratios are prepared by a hydrolysis and condensation reaction and then dispersed in commercial photopolymer (High-temp) based on interpenetrating networks(IPNs). The coating characteristics of VTES-coated $ZrO_2$ particles are observed by FE-TEM and FT-IR. The rheological properties of VTES-coated $ZrO_2/High-temp$ composite solution with different particle ratios are investigated by rheometer, and the dispersion properties of the composite solution are confirmed by relaxation NMR and Turbiscan. The mechanical properties of 3D-printed objects are measured by a tensile test and nanoindenter. To investigate the aggregation and dispersion properties of VTES-coated $ZrO_2$ ceramic particles with different particle ratios, we observe the cross-sectional images of 3D printed objects using FE-SEM. The 3D printed objects of the composite solution with nano-particles of 80 % demonstrate improved mechanical characteristics.

Temporal and Spatial Variations of Marine Meteorological Elements and Characteristics of Sea Fog Occurrence in Korean Coastal Waters during 2013-2017 (2013~2017년 연안해역별 해양기상요소의 시·공간 변화 및 해무발생시 특성 분석)

  • Park, So-Hee;Song, Sang-Keun;Park, Hyeong-Sik
    • Journal of Environmental Science International
    • /
    • v.29 no.3
    • /
    • pp.257-272
    • /
    • 2020
  • This study investigates the temporal and spatial variations of marine meterological elements (air temperature (Temp), Sea Surface Temperature (SST), and Significant Wave Height (SWH)) in seven coastal waters of South Korea, using hourly data observed at marine meteorological buoys (10 sites), Automatic Weather System on lighthouse (lighthouse AWS) (9 sites), and AWS (20 sites) during 2013-2017. We also compared the characteristics of Temp, SST, and air-sea temperature difference (Temp-SST) between sea fog and non-sea-fog events. In general, annual mean values of Temp and SST in most of the coastal waters were highest (especially in the southern part of Jeju Island) in 2016, due to heat waves, and lowest (especially in the middle of the West Sea) in 2013 or 2014. The SWH did not vary significantly by year. Wind patterns varied according to coastal waters, but their yearly variations for each coastal water were similar. The maximum monthly/seasonal mean values of Temp and SST occurred in summer (especially in August), and the minimum values in winter (January for Temp and February for SST). Monthly/seasonal mean SWH was highest in winter (especially in December) and lowest in summer (June), while the monthly/seasonal variations in wind speed over most of the coastal waters (except for the southern part of Jeju Island) were similar to those of SWH. In addition, sea fog during spring and summer was likely to be in the form of advection fog, possibly because of the high Temp and low SST (especially clear SST cooling in the eastern part of South Sea in summer), while autumn sea fog varied between different coastal waters (either advection fog or steam fog). The SST (and Temp-SST) during sea fog events in all coastal waters was lower (and more variable) than during non-sea-fog events, and was up to -5.7℃ for SST (up to 5.8℃ for Temp-SST).

Leaching Characteristics of Heavy Metals of Bottom Ash and Plating Sludge with Environmental Conditions in Landfill (매립지 환경조건을 고려한 소각재와 도금슬러지의 중금속 용출특성)

  • 손희정;김은호;이용희
    • Journal of environmental and Sanitary engineering
    • /
    • v.13 no.2
    • /
    • pp.121-127
    • /
    • 1998
  • This study was to understand leaching characteristics with pH controlling agents and Temp. control, and investigate leaching characteristics with pH control from opening a leaching test to an end for reassessing leaching test of heavy metals with environmental conditions in landfill. Because leaching of heavy metals was increased in low pH, pH must control for leaching in existing leaching test. Generally, regulation time(6hr) of leaching was confirmed reasonablely, except for Cu in plating sludge. In pH controlling solution, there was nearly not difference between Acetic acid and HCl and if considering Cu, the former was appropriate. In a part of heavy metal, leaching rate was increased in high Temp., and normal Temp. in existing leaching test would be revaluated.

  • PDF