• Korea journal of population studies
• /
• v.8 no.1
• /
• pp.118-138
• /
• 1985

This paper is aimed to analyse the recent changes in family planning as a step in an evaluation of the results of the population control policy which has been strenuously pursued by the government since December 1981. The data used in this analysis comes from the 1985 national fertility and family planning survey conducted by the Korea Institute for Population and Health (KIPH) in May 1985. According to the 1985 survey data, there have been great changes in both the contraceptive practice and fertility rates since the strengthening of the government's population control policy in 1 981. The contraceptive practice rate for married women aged 15-44 has increased from 57.7% in 1982 to 70.3% in 1985, an increase of 12.6% points in the short span of only 3 years. During the same period, the total fertility rate has declined from 2.7 in 1982 to the population replacement level which was planned to achieve by 1 988. More than 80% of women aged over 30 or with two children or more are practicing contraception, while the practice rates of women with 0-1 children are 14.0% and 45.1% respectively. The survey has revealed that the increase of contraceptive practice rate during 1982-1985 has mainly attributed to the high acceptance of sterilization procedures which practice rate of the married women has increased from 28.1% to 40.3% for the period. Also, the survey data shows that 24.7% of those women with only one child is practicing contraception for thepurpose of fertility termination. The government, taking into account of rapid changes in contraceptive practice and fertility rates, is formulating a population plan during the sixth fiveyear economic and social development plan (1987-1991) to achieve 1% ofpopulation growth rate by 1993, which was planned to realize by 2000. In order to meet this demographic goal, the existing population control policy measures should be improved to be suited to the recent contraceptive use and fertility changes. From this standpoint, the following considerations should be put forth; 1) improvement of the current program management systems including target allocation and evaluation schems for recruiting new acceptors in the young 20s groups to use contraceptives for birth spacing and to increase high continuation rates through the strengthening of follow-up services for the acceptors, 2) increase of self-supporting contraceptive users by promoting commercial advertisements on contraceptives through mass media including T.V. and radio, 3) development of social support policies including incentive schems, and strengthening of IE & C activities for increasing the proportion of the one-child family, 4) strengthening of population and family planning education in and out school youth, and 5) strengthening of management capabilities at the provincial and local program managers.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.253-259
• /
• 2005

This study was accomplished using attached $A^2/O$ process that contains nonsurface-modified and surface-modified polyethylene media inside the Anaerobic/Anoxic, Oxic tank, respectively. We could make the hydrophobic polyethylene media have hydrophilic characteristics by radiating ion beam on the surface of the media. The objectives of this study is to investigate the removal efficiencies of the organics and nitrogen when the step feed ratio of raw wastewater into anaerobic and anoxic tank is changed. In this case, we assumed that the denitrification rate can be improved because the nitrifiers in anoxic tank can perform denitrification using RBDCOD instead of artificial carbon sources (for example, methanol, etc.). The wastewater injection rate into anaerobic/anoxic tank was set up by the ratio of 10 : 0, 9 : 1, 8 : 2, 6 : 4, and the results of BOD removal efficiency showed similar trends with $93.3\%,\;92.6\%,\;92.4\%\;and\;91.6\%$, respectively. But the BOD removal efficiency (utilization of the organics) in the anoxic tank was in the order of 9 : 1 $(84.8\%)$, 10 : 0 $(77.0\%)$, 8 : 2 $(75.3\%)$, and 6 : 4 $(61.1\%)$. The T-N removal efficiency was most high when the ratio is 9 : 1 $(67.4\%)$, and other conditions, 10 : 0, 8 : 2, 6 : 4, showed $61.3(\%),\;60.7\%,\;55.5\%$, respectively; the ratio 6 : 4 was found to be lowest T-N removal efficiency, lower than the ratio 9 : 1 by $12\%$. Though the nitrification rate of the ratio 10 : 0, 9 : 1, and 8 : 2 showed similar levels, the ratio 6 : 4 showed considerable inhibition of nitrification, ammonia was the great portion of the effluent T-N. The advantages of this process is that this process is cost-saving, and non-toxic methods than injecting the artificial carbon source.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.166-170
• /
• 2009

The temperature fluctuations was investigated in cold distribution chain of radish sprout, typical of commercial practice. Although the temperature of distribution chain was maintained below 5$^{\circ}C$ in precooling and packaging steps, and 10$^{\circ}C$ in transporting, temperature of loading step increased up to 18$^{\circ}C$ at market. Based on this investigation, the simulated cold distribution conditions were consisted of precooling and packaging step; 5$^{\circ}C$ for 12 hours and transporting and loading steps; 5$^{\circ}C$, 10$^{\circ}C$, 20$^{\circ}C$ and $^{\circ}C$ for 6 hours, and storage and market steps; 5$^{\circ}C$ and 10$^{\circ}C$ for 17 days. The radish sprouts were cultivated at 25$^{\circ}C$ and dark condition for S days and placed in light condition for greening. They were packaged by 25 ${\mu}m$ ceramic film after precooling for 6 hours in 5$^{\circ}C$. The fresh weight loss and visual quality of radish sprout decreased with the increase of the temperature in transporting and loading steps. The carbon dioxide content of packages increased, but the oxygen content decreased rapidly in 1day after storage, as the temperature of transporting and loading steps increased. The ethylene content in packages increased fastest in higher temperature of transporting and loading steps treatment, and showed highest in 5$^{\circ}C$-30$^{\circ}C$-10$^{\circ}C$ treatment (temperature of precooling and packaging steps for 12 hours - temperature of transporting and loading steps for 6 hours - temperature of storage step for 14 days) followed by 5$^{\circ}C$-20$^{\circ}C$-10$^{\circ}C$ treatment. The high temperature of transporting and loading steps resulted in deterioration qualities and atmosphere conditions in packages of sprout. These results suggested that the temperature fluctuation in distribution should influence the shelf-life of radish sprouts, even thought the periods of fluctuation was just 6 hours.

• Radiation Oncology Journal
• /
• v.24 no.1
• /
• pp.11-20
• /
• 2006

Puroose: In order to find out whether stereotactic radiation therapy (RT) using CyberKnife (CK) could improve survival rate and lower acute toxicity compared to conventional RT. Materials and Methods: From April 2003 through April 2004, 19 patients with Eastern Cooperative Oncology Group (ECOG) performance status ${\leq}3$ and locally advanced pancreas cancer without distant metastasis, evaluated by CT or PET/CT, were included. We administered stereotactic RT consisting of either 33 Gy, 36 Gy or 39 Gy in 3 fractions to 6, 4 and 9 patients, respectively, in an effort to increase the radiation dose step by step, and analyzed the survival rate and gastrointestinal toxicities by the acute radiation morbidity criteria of Radiation Therapeutic Oncology Group (RTOG). Prognostic factors of age, sex, ECOG performance score, chemotherapy, bypass surgery, radiation dose, CA 19-9, planning target volume (PTV), and adjacent organ and vessel invasion on CT scan were evaluated by Log Rank test. Results: The median survival time was 11 months with 1-year survival rate of 36.8%. During follow-up period (range $3{\sim}20$ months, median 10 months), no significant gastrointestinal acute toxicity (RTOG grade 3) was observed. In univariate analysis, age, sex, ECOG performance score, chemotherapy, bypass surgery, radiation dose, CA 19-9 level, and adjacent organ and vessel invasion did not show any significant changes of survival rate, however, patients with PTV (80 cc showed more favorable survival rate than those with PTV>80 cc (p-value<0.05). In multivariate analysis, age younger than 65 years and PTV>80 cc showed better survival rate. Conclusion: In terms of survival, the efficacy of stereotactic radiation therapy using CK was found to be superior or similar to other recent studies achieved with conventional RT with intensive chemotherapy, high dose conformal RT, intraoperative RT (IORT), or intensity modulated RT (IMRT). Furthermore, severe toxicity was not observed. Short treatment time in relation to the short life expectancy gave patients more convenience and, finally, quality of life would be increased. Consequently, this could be regarded as an effective novel treatment modality for locally advanced, unresectable pancreas cancer. PTV would be a helpful prognostic factor for CK.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Journal of Digital Contents Society
• /
• v.12 no.4
• /
• pp.457-465
• /
• 2011

The annual R&D investment in Korea increased by an average of 12.2percent during the last 5 years. Therefore, prevention of duplicate projects being performed became an important factor in promoting the efficiency of R&D investment and the originality of R&D projects. On measuring the similarity of projects, the measurement model used to estimate the accuracy of the similarity is crucial. In this paper, we propose an advanced measurement model on checking the similarity of R&D projects for promoting the efficiency of R&D investment. The proposed model is made up of the following steps for the model measurement, sampling and analyzing. During the sampling step, we append the abstract of R&D reports on the search engine based on document vector. We then measure the similarity on projects to use research title network which is consists of the compound keyword and the weight of items on during the analysis. The proposed method improved the accuracy for measuring the similarity of projects by an average of 0.19 over the existing search engine and by 9.25 over the simple keyword search on R&D projects. On searching the similarity with the appending conditions and high sampling, it improved the accuracy of measuring the similarity of R&D projects.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.321-331
• /
• 2019

BACKGROUND: Pinoxaden is the phenylpyrazoline herbicide developed by Syngenta Crop Protection, Inc. and marketed on 2006. The maximum residue levels for wheat and barley were set by import tolerance. Thus, Ministry of Food and Drug Safety (MFDS) official analytical method determining Pinoxaden residue was necessary in various food matrixes. Satisfaction of international guideline of CODEX (Codex Alimentarius Commission CAC/GL 40) and National Institute of Food and Drug Safety Evaluation-MFDS (2017) are additional pre-requirements for analytical method. In this study, liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was investigated to analyze residue of Pinoxaden (M4), which is defined as pesticide residue in Korea, in foods. METHODS AND RESULTS: Pinoxaden (M4) was extracted followed by acid digestion (2hr reflux with 1N HCl) and pH adjusting (pH 4-5 with 3% ammonium solution). To remove oil, additional clean-up step with hexane saturated with acetonitrile was required to high oil contained sample before purification. HLB cartridge and nylon syringe filter were used for purification. Then, samples were analyzed by LC-MS/MS using reserve phase column C₁₈. Five agricultural group representative commodities (mandarin, potato, soybean, hulled rice, and red pepper) were used to verify the method in this study. The liner matrix-matched calibration curves were confirmed with coefficient of determination (r²) > 0.99 at calibration range 0.002-0.2 mg/kg. The limits of detection and quantitation were 0.004 and 0.01 mg/kg, respectively, which were suitable to apply Positive List System (PLS). Mean average accuracies of pinoxaden (M4) were shown to be 74.0-105.7%. The precision of pinoxaden and its metabolites were also shown less than 14.5% for all five samples. CONCLUSION: The method investigated in this study was suitable to CODEX (CAC/GL 40) and National Institute of Food and Drug Safety Evaluation-MFDS (2017) guideline for residue analysis. Thus, this method can be useful for determining the residue in various food matrixes in routine analysis.

• Journal of Korea Water Resources Association
• /
• v.44 no.7
• /
• pp.577-590
• /
• 2011

In this study, the watershed and water body models were linked for the simulation of the Nakding river flow. This is a pre-step study for the estimation of the effect of the flow and water quality on the climate change. For models of watershed and river flow, the SWAT and EFDC were used, respectively. The runoff discharge at each boundary points for the simulation of the river flow was provided from the drainage basin model. The calculated runoff discharge by the SWAT model was compared with the measured data of the Ministry of Environment at 13 locations along the Nakdong river and 30 locations along the tributary streams. The computed water discharge was shown to be similar with the measured data. For the model calibration and verification, % difference, NSE, and $R^2$ were computed. The computed % difference was within 15% except of a few points. The NSE and $R^2$ were also within a fair level. The Nakdong river flow of 2007 was simulated by using the EFDC model. The comparison with the measured data showed that the model reflected the actual values of low and high flow well. Also, it was confirmed that the acceleration and deceleration in the curved areas were appropriately simulated. The movement of dye injected at the upstream boundary was simulated. The result showed that the arrival time up to the estuary dam was computed to be about 65 days.

• The Korean Journal of Emergency Medical Services
• /
• v.14 no.3
• /
• pp.71-81
• /
• 2010

Purpose: To minimize an interruption in chest compression, reduce the hands-off time, the American Heart Association has recommended the ratio of chest compression to ventilation ratio to 30:2 from 2005 CPR guideline to 2010 CPR guideline. However, current studies have shown that the hands-off time was > 10 seconds with that method. For this reason, we devised new CPR method that a ventilation to chest compression ratio of 2:30 to reduce pt assessment time and skipped the assessment step of carotid artery pulse would be a more effective way to reduce the hands-off time & the time to set the CPR. According to the more detailed purpose are listed below. 1) We would like to confirm efficiency of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 to reduce the hands-off time & the time to set the CPR. 2) We would like to evaluate possibility of increasing for chest compression accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 3) We would like to evaluate possibility of increasing for ventilation accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 Methods: According to 2005 American Heart Association Guidelines, 60 paramedic students(20 students X freshmen, sophomore, junior) performed 5 cycles of 3~ chest compressions : 2 ventilations after A, B, C evaluation with Laerdal Resusci R Anne SkillReporters. After 5 minutes rest, the 60 students performed 5 cycles of 2 ventilations : 30 chest compressions after A, B evaluation with the manikins between 13 and 17 September 2010. The short reports including speed & accuracy of chest compression, respiratory, CPR cycle were gained from the manikins. Hands-off times were measured by assistants. Results: Recently, the importance of high quality CPR was emphasized in order to perform the CPR faster and more accurate. To find out improving the conventional CPR method, we switch the procedure of the compression and the ventilation. By switching the procedure back and forth, we are able to compare the effectiveness of CPR between two type of CPR method which are 2:30 and 30:2 methods. 2:30 is that the breaths is delivered twice, first and perform 30 compressions while 30:2 perform 30 compressions first and give 2 breaths followed by the ABC method. Also, we verify the effectiveness of the hands off time, compression accuracy of the compression through the comparison of the two procedure as mentioned earlier. Consequently research verified that 2:30 is the efficient by providing faster set up delivering more accurate chest compression. Conclusion: 2:30 can minimize a time delay from cardiac standstill until starting the chest compression. In addition, hands-off time which is an interruption in chest compression can be shortened by 2:30 method, which result to effective oxygenation of coronary artery & maintenance of the bloodstream. Once again, performing the 2:30 method provide lessen hands off time and increase the accuracy of the chest compression.

• Archives of design research
• /
• v.16 no.2
• /
• pp.375-384
• /
• 2003

This study is on the strategy for establishing successful corporate brand image, by understanding the need for increasing brand value based on the level of brand recognition. In order to carry this out, the PICS (Product Image Concentration System) is suggested, which includes Brand Image Analysis on a high-level, Product Image Programming based on the result of the image analysis, and Product Image Coherency Assessment and Management, resulting in setting up a guideline for gaining competitive advantage and brand management. Brand Image Analysis is a method that utilizes image association to understand brand disposition by analyzing the association pattern among available visual materials to measure the corporate and brand image inclinations. As the next step, Product Image Programming establishes design philosophy and principles based on the analysis of brand image, and the Visual Programming is a process for visualizing the intended product image direction. Lastly, Product Image Coherency Assessment examines whether to incorporate design philosophy and principles or not to arrive at an agreed evaluation criteria for developing designs coherent with the brand image. The PICS (Product Image Concentration System) is a practical method for increasing a company' competitive advantage and managing brand. The expectation on this system is to provide a guideline for applying brand image in design process more objectively. For further study, diversification of image spectrum based on expressive keywords and comparative analysis on images as well as a product image interpretation program to understand the order of visual materials will be necessary.