• 한국ITS학회 논문지
• /
• 제17권4호
• /
• pp.76-85
• /
• 2018

본 연구는 도시철도 출입구의 계단과 에스컬레이터에 대한 시민이용자의 선호, 계단 높이에 따른 에스컬레이터 설치 요구 정도를 확인하고, 에스컬레이터 편의(amenity)에 대한 지불의사금액(WTP)을 조사하였다. 조사결과 지하철 이용자 89%가 계단보다 에스컬레이터를 선호하고, 2층 높이 이상인 계단에 대해 에스컬레이터가 필요하다고 응답하였다. 특히 연령이 30대 이상인 경우, 성별은 여성일 때 더욱 에스컬레이터를 선호하는 것으로 나타났다. 따라서 통로 폭만을 고려한 설치기준에 이용자의 인적 특성과 시설 특성(계단의 높이)을 고려할 필요가 있다. 지불의사와 관련 개선분야, 경사로높이, 성별, 연령이 상관관계가 높은 것으로 나타났고, 다중로지스틱모형 중 이항로짓모형을 이용하여 WTP를 산출하였다. 서울도시철도를 이용하는 일반 시민은 에스컬레이터 사용가치(신체적 편의)로 34.37원을 지불할 의사가 있는 것으로 분석되었다.

• 한국전자통신학회논문지
• /
• 제5권6호
• /
• pp.651-656
• /
• 2010

16개 시 도 교육청의 누리집의 학교 정보 서비스는 대부분 정적인 지도 이미지에서 지역을 클릭 했을 때 해당 지역의 학교 정보를 제시하거나 검색에 의한 텍스트 위주의 결과 정보를 나열한다. 그리고 동기적 전송에 의한 검색으로 서버 부하 및 느린 전송 속도 등 여러 문제점을 내포하고 있다. 이에 본 연구에서는 위치기반의 학교 정보를 제공하기 위해 구글 지도의 Open API를 이용하고 검색 시 서버 부하 감소 및 전송 속도 향상을 위해 비동기적 전송 방식의 Ajax 프로그램을 이용하여 학교 정보 매쉬업 서비스를 구현 하였다. 이 서비스는 학생, 교사, 학부모 등 다양한 계층의 교육 가족에게 동적 지도상에 위치기반의 학교 정보를 서비스함으로써 효율성과 편리함을 줄 수 있다.

• 한국보건간호학회지
• /
• 제24권1호
• /
• pp.39-48
• /
• 2010

Purpose: To examine the effects of a 36-week resistance training program on body composition, fitness and blood lipid profiles in the obese elderly. Method: fourteen subjects were assigned into the resistance training group. The 12-16 exercise sessions were performed for 60min with 15-25 repetitions twice per week for 36 weeks. Data were analyzed by paired t-test with SPSS version 12.0 for Windows. Results: Significant changes were evident in weight (t=5.983, p<.001), body mass index (t=5.922, p<.001), % body fat (t=3.480, p=.004), and fat free mass (t=-2.592, p=.022). Concerning exercises, no significance was noted for back scratch (t=-1.814, p=.093), but were for 2-min step (t=-3.075, p=.009), arm curl (t=-2.223, p=.045), chair stand (t=-3.671, p=.003), chair sit and reach (t=-2.508, p=.026), and 8-ft up and go (t=5.545, p<.001). No significant changes were evident in total cholesterol (t=1.189, p=.279), and total glucose (t=0.689, p=.517), while the change in high-density lipoprotein was significant (t=3.535, p=.012). Conclusion: The 36-week resistance training program enhanced body composition and physical fitness, but not blood lipid profiles in obese elderly subjects.

• 대한토목학회논문집
• /
• 제4권2호
• /
• pp.1-11
• /
• 1984

본연구(本硏究)는 평면교차점(平面交叉點)을 대상(對象)으로 하여 교통사고(交通事故)와 그 요인간(要因間)의 상호관련성(相互關聯性)을 통계적(統計的)으로 분석(分析)하고 사고예측(事故豫測)모델의 작성(作成)과 예측(豫測)모델을 이용(利用)한 교차점(交叉點)의 위험도(危險度) 평가방법(評價方法)에 대(對)한 연구(硏究)이다. 사고예측(事故豫測)모델은 주성분분석(主成分分析)에 의(依)하여 선택(選擇)된 설명지표(說明指標)를 사용(使用)하고 최량(最良)모델식(式)을 얻기 위하여 단계적(段階的) 회귀분석(回歸分析)에 의(依)하였으며 작성(作成)된 모델은 통계적(統計的)으로 유의(有意)하였다. 그리고 교차점(交叉點) 안전대책(安全對策)의 수립(樹立)은 위험교차점(危險交叉點) 추출(抽出)이 전제(前提)가 되므로 사고예측(事故豫測)모델을 이용(利用)한 위험교차점(危險交叉點)의 추출방법(抽出方法)을 제안(提案)하였다. 추출(抽出)된 위험교차점(危險交叉點)이 실제(實際)의 사고다발교차점(事故多發交叉點)과 잘 일치(一致)되었다.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3538-3548
• /
• 1996

In this study, as a part of basic study for developing the simulation program for the assemssment of reliability of electronic EMC packaging which covers from EMC mixing step to thermal analysis, comparison between a measured and predicted values of material properties of EMC and finitde element analysis of thermal stress are performed. For the experimental testing specimens of fifty, sixty hive and eighty percent filler($13\mu m$, spherical silica) weight fraction are fabricated using tranfer molding. Coefficient of thermal expansion, elastic modulus and thermla conductivity are measured using these specimens and then these measured values are compared with the predicted values by various equations ( such as dilute suspension method. self consistent method, generalized self consistent method, Hashin-Shtrikman's bounds. Shapery's bounds, Nielsen's method and others). Measured values are distributed within the upper and lower bounds of equations. Measured elastic modulus and coefficient of thermal expansion approaches closely the perdicted values with self consisten mehtod and upper bound of Shaperys equation respectively. However small differences of thermal conductivity between the different filler volume fraction are obserbed. FEM analysis indicates that firstly stress is concentrated at the corner section of EMC and secondly EMC with eighty percent filler weight fraction shows less thermal stress when package is cooling down and relatively high thermal stress when package is heating up.

• Journal of Dairy Science and Biotechnology
• /
• 제25권2호
• /
• pp.33-40
• /
• 2007

The Korean dairy industry has been developed continuously for the past seventy years both in quality and quantity; now the total amount of dairy products accounts for 13 percent of that of livestock production - a remarkable turnover. Korea now stands at the 13th economic power around the world and it is inevitable that we must pursue an open-door policy at a global level; the dairy industry should also strengthen its potentialities in the long term in order to compete with advanced dairy countries. It is predicted that the impact of DDA agreement and FTA negotiations on the domestic dairy industry will be great; so it is urgently needed that we should reconsider the current status of the dairy industry and comprehensive mesures for dairy industry development to improve its international competitiveness. Such measures comprise the three aspects: first, reforming the policy of dairy industry-related systems, second, improving the productivity and third, expanding the consumption of dairy products. In terms of the system reforming, the most important things are, above all, the planned production relevant to market needs, the milk supply and demand management, and the raw milk transaction method. Secondly, the appropriate scale of management is important for the enhancement of productivity together with the modernization of dairy facilities. Thirdly, step-up effort is needed to expand the milk consumption; especially, more milk should be provided to the students by improving the standing milk ration system in middle and senior high schools. The government should make more effort to support and develop new dairy products tuned to consumers' taste, accelerating the publicity of diverse and steady milk consumption together with related organizations.

• 한국환경보건학회지
• /
• 제24권2호
• /
• pp.9-19
• /
• 1998

Laboratory experiments were carried out to investigate the performance of anaerobic sequencing batch reactor(ASBR) for digestion of a municipal sludge. Each cycle of the ASBR comprised feeding, two-or three-day reaction, one-day thickening, and withdrawal. The reactors were operated at an HRT of 10days and 5days with an equivalent organic loading rate of 0.8-1.54 gVS/l/d, 1.81-3.56 gVS/l/d at 35$\circ$C, respectively. Solids accumulation was remarkable in the ASBR during start-up period, and directly affected by settleable solids in the feed sludge. Floatation thickening occured in the ASBRs, and Solids profiles at the end of thickening step dramatically changed at solid-liquid interface. Slight difference in solids concentrations was observed within thickened sludge bed. Efficiencies through floatation thickening were comparable to that of additional thickening of the completely mixed control reactor. Average solids concentrations in the ASBRs were 2.2-2.6 times higher than that in the control throughout the total operation period. The dehydrogenase activity had a strong correlation with the solids concentration. Organics removals based on clarified effluent of the ASBRs were consistently above 86%. Remarkable increase in equivalent gas production of 27-52% was observed at the ASBRs compared with the control though the control and ASBRs showed similiar effluent quality. Thus, digestion of a municipal sludge was possible using the ASBR in spite of high concentration of solids in the sludge.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1244-1245
• /
• 2008

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, electromechanical coupling coefficient(Kp) and mechanical quality factor(Qm), but is indicated of peeling-phenomenon of electrode, rising sintering temperature made price of costly electrode. So in this study, it discuss on method for fabrication of rosen type piezoelectric transformers. For the fabrication as rosen type piezoelectric transformers, synthesized the powder using 0.01Pb$(ni_{1/3}Nb_{2/3})O_3$ - 0.08Pb$(Mn_{1/3}Nb_{2/3})O_3$ - 0.91Pb$(Zr_{0506}Ti_{0496})O_3$ (abbreviated as PNN-PMN-PZT) ceramics. The density, microstructure, dielectric and piezoelectric properties as a function of sintering temperature were investigated. The results indicated that the optimized properties of ceramics were obtained at sintering temperature of 1200$^{\circ}C$, showed the value of $d_{33}$=273pC/N, $K_p$=0.60 $Q_m$=1585, ${\varepsilon}_r$=1454, density=7.917$g/cm^3$ and $tan{\delta}$=0.0064.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권8호
• /
• pp.4717-4721
• /
• 2013

Complete surgical resection of the primary tumour is a crucial predictive step for head and neck squamous cell carcinoma (HNSCC), because incomplete resection may lead to increase in the recurrence rate. Molecular cancer markers have been investigated as potential predictors of prognosis marker, to identify patients who are at high risk of local recurrence. This retrospective study aimed to determine the prognostic correlation between p53 and eIF4E expression and clinical characteristics, recurrence and overall survival. Forty eight HNSCC patients were selected between 2006 and 2009 diagnosed at the Royal Darwin Hospital, Darwin, Northern Territory, Australia. Out of 48, only those 24 with negative surgical margins with hematoxylin and eosin (HandE) were chosedn for further analysis. A total of 77 surgical margins were obtained and subsequently analysed by immunohistochemical (IHC) staining with monoclonal p53 and polyclonal eIF4E antibodies. Contingency table and ${\chi}^2$-test were used to investigate the correlation between p53 and eIF4E expression and clinical characteristics, recurrence and overall survival of the HNSCC patients. The follow up period was 74 months (range 1-74 months). The Kaplan-Meier method was used to generate recurrence and survival curves. This is a first retrospective study of Northern Territory patients, including Indigenous and non-Indigenous Australians. Molecular study of surgical margins could help to identify patients with and without clear margins after surgery and help in choice of the most appropriate adjuvant treatment for HNSCC patients.

• 한국생활과학회지
• /
• 제18권3호
• /
• pp.793-798
• /
• 2009

Hair cut is one of the best useful technical tool for hair styling. In this study using the rule of the layers of hair design, balanced for visual art, perceptual ability and form created by the principles of analysis and offer hair cuts and hair design of the representation of regions and even hair design as the basis of a student of Hair Beauty and all the people working in the field can create a variety of hair design puts the purpose to establish a basis. The result of this study can be outline as follows: First, the step line and the movement of the relationship between the law of the layers above and below the length of the same layer techniques, the same consists of a vertical cross-section of the overall round shape of the cut same layer is created and the appropriate volume and movement, the movement of low-layer round a little bit more feeling and expression is used when you want. High-layer used to want to move a lot of light and could see that. Second, the layer of the Law and over direction, lifting, section, the line control. weight control and analyzed by principle and the principle of the process of forming the written form was unknown. Third, hair design, the expansion of the expressive power of the law of the layers, and the section of the over direction depends on the presence of line control to express the length of the outline I had to, lifting the weight to adjust form controls, and the expression of Hair Design will be expanding the width. A hair designer, a layer style to create a zone he thought the law of the first layer formative area To further the reach will be a lot of research, leading up formative aspects of this research thesis do not have missing parts, or as a result of the Beauty of Hair Design and the width of a hair design education in the field can perform to help feed the reference materials that will be.