• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.647-650
• /
• 2000

For the failure diagnosis of industrial system like various manufacturing systems, power plants and etc, many failure diagnosis approaches are considered. Here we are focus on the DES approach for failure diagnosis. We treats of failure recovery problem that is euly not mentioned in DES approach. The procedure to design a recoverable diagnoser is presented. And the recoverability, necessary and sufficient condition fur recoverability are defined. Then we make the high-level diagnoser to reduce the state size of recoverable diagnsoer. Finally, a pump-valve system example is presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.69-78
• /
• 1995

Nonlinear analysis methods are developed which will enable the reliable prediction of the dynamic behavior of the space shuttle main engine(SSME) turbopumps in the presence of bearing clearances and other local nonlinearities. A computationally efficient convolution method, based on discretized Duhamel and transition matrix integral formulations, is developed for the transient analysis. In the formulation, the coupling forces due to the onlinearities are treated as external forces acting on the coupled subsystems. Iteration is utilized to determine their magnitudes at each time increament. The method is applied to a nonlinear generic model of the high pressure oxygen turthods, the convolution approach proved to be more accurate and highly more efficient. For determining the nonlinear, steady-state periodic responses, an incremental harmonic balance(IHB) method was also developed. The method was successfully used to determine dominantly harmonic and subharmonic(subsynchronous) responses of the HPOTP generic model with bearing clearances. A reduction method similar to the impedance formulation utilized with linear systems is used to reduce the housing-totor models to their coordinates at the bearing clearances.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.60-66
• /
• 2006

For the purpose of finding out the sound field characteristics in a rectangular cavity, analytical and experimental studies are performed with white noise input. Two-microphone impedance tube method is used to measure the impedances of foamed aluminum. Foamed aluminum is well known metallic porous material which has excellent properties of light weight and high absorbing performance. And predicted impedances of foamed aluminum are compared with measured impedances. The predicted acoustical parameters are applied to the theoretical analysis to predict sound pressure field in the cavity. The measured sound absorption effects are compared with the predicted values for both cases with and without foamed aluminum lining in the cavity of the rectangular enclosure.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.61-66
• /
• 2000

In this paper, we discuss the machining characteristics of HDD glass. Glass is now being used globally as a data storage device, Such glasses are usually machined by lapping by this technique requires a long machining time, resulting in low productivity, For this reason, we examine the possibility of EILD grinding in HDD glass workpieces, A move to ELID grinding may result in substantial cost reduction. Our purpose is to investigate the grinding characteristics of HDD glass in ELID grinding. The bonding materials for fixing the abrasives of cast iron, cobalt and bronze are applied, and grinding conditions such as rotation speed and feeding are varied. Results show that with the use of ELID, mirror surfaces can be achieved with high efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.872-876
• /
• 1996

Most studies of rotary machinery design have been performed to establsih a new mechanism or a dramatic combination of machine elements for the power transmission. Although the rotary machine is worked very efficiently, that still has a major work to better performance which is the optimization of the selected mechanism for the mechanical efficiency, low vibration and noise, or customer interest. This work presents a practical approach used for washer's efficiency and machinery vibration and noise reduction along with a systematic procedure. Also for the confirming the study, a computer simulation program and a real working mock-up are developed and used to show very good agreement with the analytical result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.299-300
• /
• 2006

The camera and reduction mechanism that are equipment outdoors camera for general CCTV are miniaturization trend gradually. The foreign countries began to sell variableness speed type camera drivels that do DC voltage by motive power recently. But, Domestic is state that enterprise which has technology connected with this does not exist. We need optimum control program design, an internal organs technology, actuator interface and a driver design technology that have position control special quality of high accuracy as a necessary technology for CCTV camera drivers. Also, we need detailed mechanism design and a manufacture technology of camera drivers that behave variable speed essentially.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.796-799
• /
• 2002

The stress of the rotating disc with several types of hole was investigated in detail in this paper. Maximum circumferential stress of rotating disc by changing hole shape with same area, were studied using FEM. The results obtained were as follows: 1. The disc which rotates at high speed is subjected to circumferential stress remarkably. 2. When the number of circular holes in rotating disc is four, stress reduction effect is maximum. 3. When shape of holes in rotating disc is cylindrical elongated hole, maximum circumferential stress of the rotating disc decreased most.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.103-112
• /
• 1998

The evolution of semiconductor manufacturing technology has accelerated the reduction of device dimensions and the increase of integrated circuit density. In order to improve yield within a short turn around time and maintain it at high level, a system that can rapidly determine problematic processing steps is needed. The statistical process control detects abnormal process variation of key parameters. Expert systems in SPC can serve as a valuable tool to automate the analysis and interpretation of control charts. A set of IF-THEN rules was used to formalize knowledge base of special causes. This research proposes a strategy to apply expert system to SPC in semiconductor manufacturing. In analysis, the expert system accomplishes the instability detection of process parameter, In diagnosis, an engineer is supported by process analyzer program. An example has been used to demonstrate the expert system and the process analyzer.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.9-11
• /
• 1999

A brushless and slotless DC linear motor(LDM)employing a movable set of neodymium-iron-boron type of magnets has high performances in advantages of large thrust per weights and accurate position control. But the Moving Magnet LDM produces thrust ripples owing to mainly end-effects, shape and magnetization of permanent magnets and so on. This paper represents the improvements of thrust ripples using the finite elements methods and phase control topology.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.22-29
• /
• 2004

As a result of high integration of semiconductor device, the global planarization of multi-layer structures is necessary. So the chemical mechanical polishing(CMP) is widely applied to manufacturing the dielectric layer and metal line in the semiconductor device. CMP process is under influence of polisher, pad, slurry, and process itself, etc. In comparison with the general CMP which uses the slurry including abrasives, fixed abrasive pad takes advantage of planarity, resulting from decreasing pattern selectivity and defects such as dishing & erosion due to the reduction of abrasive concentration especially. This paper introduces the manufacturing technique of fixed abrasive pad using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. And the tungsten CMP using fixed abrasive pad achieved the good conclusion in terms of the removal rate, non-uniformity, surface roughness, material selectivity, micro-scratch free contemporary with the pad life-time.