• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.332-333
• /
• 2019

본 논문에서는 전기자동차용 단상 양방향 온보드 충전기를 위한 Cycloconverter-type high frequency link 컨버터에 Si-IGBT와 SiC-FET을 적용하여 전력반도체의 전력 손실을 예측하고 비교하고 분석한다. 와이드밴드갭 전력반도체 중 하나인 SiC-FET은 기존 Si기반의 IGBT를 대신하여 사용될 전력반도체로써 각광 받고 있다. 또한, 낮은 온-저항으로 인해 적은 전력손실과 고주파 스위칭을 통한 직류단 필터의 크기감소를 통해 높은 전력밀도를 달성할 수 있다. 이에 Si-IGBT와 SiC-FET을 Cycloconverter-type high frequency link 컨버터에 적용하여 전력손실을 PSIM thermal module을 통해 시뮬레이션하고 비교 분석한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.465-472
• /
• 2017

Security has become one of the most important requirements for various devices for multi-sensor based embedded systems. The AES (Advanced Encryption Standard) algorithm is widely used for security, however, it requires high computing power. In order to reduce the CPU power for the data encryption of images, we propose a new image encryption module using hardware memoization, which can reuse previously generated data. However, as image pixel data are slightly different each other, the reuse rate of the simple memoization system is low. Therefore, we further apply an approximate concept to the memoization system to have a higher reuse rate by sacrificing quality. With the novel technique, the throughput can be highly improved by 23.98% with 14.88% energy savings with image quality loss minimization.

• Journal of Power System Engineering
• /
• v.7 no.2
• /
• pp.51-55
• /
• 2003

Recently the requirements for light weight and high performance of the automobile have increased. Especially, the plastic fuel tube makers have made their efforts to dove]op the various plastic fuel tube module with not only dimensional accuracy but also cost competitiveness. The experiment is performed to investigate spring backs for PA12 plastic fuel tubes in case of compound bending. In the experiment, steam bending process is adopted as bending method. In this study, the results we obtained are used to design the bending fixtures and the compound bending system.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.82-86
• /
• 2004

In this paper, a cycler system for the Lithium-Polymer battery with the large capacity of 120Ah is presented. This system is constituted as the two units for the charging and discharging. The Lithium-Polymer battery should be charged in CC and CV mode, and it is required a very high precision control of the voltage and current for the charging unit. To decrease the switching noises and harmonics, parallel operation method is adopted and utilized in the power conversion module. The discharging unit has a link AC system function to return the discharging energy of battery to AC line and has comparatively less thermal loss. These units are designed to be controlled and monitored by personal computer. The total system for the battery charging and discharging is described and presented.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1139-1146
• /
• 2014

Digital signal processor (DSP) and field programmable gate array (FPGA) based concentrated control systems are designed for implementing CPS-SPWM strategies. The self-defined universal asynchronous receiver/transmitter (UART) protocol is used for communication between a master controller and an individual module controller via high speed links. Aimed at undesired pulse competition, this paper analyzes its generation mechanism and presents a new method for eliminating competition pulses with no time delay. Finally, the proposed concentrated controller is applied to a 10kV/10MVar distribution static synchronous compensator (DSTATCOM) industrial prototype. Experimental results show the accuracy and reliability of the concentrated controller, and verify the superiority of the proposed elimination method for competition pulses.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.151-152
• /
• 2012

본 논문은 전기자동차의 탑재형 충전기 (OBC, On-Board Charger)에 적용 가능한 고효율 역률개선회로 (PFC, Power Factor Correction Circuit)들의 손실을 분석한다. 평균전류모드제어를 이용하여 conventional boost PFC, interleaved boost PFC, semi-bridgeless PFC, totem pole PFC, seudo totem pole PFC, back-to-back bridgeless PFC, interleaved bridgeless PFC 등 7개의 토폴로지를 3.3kW OBC 기반으로 설계하고, 각 토폴로지의 손실을 수식과 PSIM의 thermal module을 이용하여 분석한다. 분석한 결과를 토대로 제시한 토폴로지들의 효율 및 성능을 비교한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.367-373
• /
• 2016

In this paper, range measurement performance of LRF (Laser Range Finder) module and image contrast of color CCD camera are evaluated under the aerosol (high temperature steam) environments, which are simulated severe accident conditions of the LWR (Light-Water-Reactor) nuclear power plant. Data of LRF and color CCD camera are key informations, which are needed in the implementation of SLAM (Simultaneous Localization and Mapping) function for emergency response robot system to cope with urgently accidents of the nuclear power plant.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.850-853
• /
• 2005

This paper presents issues of display hardware architecture, relating to memory, display driver IC architecture, and chip-to-chip interface. To achieve a low power and low cost mobile phone, not only the display architecture must be carefully selected, but also the driver-ICs optimized to accommodate the different modes of operation found in typical handheld devices. The technique of forming a photo sensor in each pixel using TFT and display module architecture are developed to add multi functions in display such as fingerprint recognition, image scanning, and integrated touch screen. Detailed architectures of IC partitioning, high-speed serial interface, D/A converter, and multi functions such as fingerprint recognition and image scanning using photo sensors are important to a power optimized system.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.4
• /
• pp.216-223
• /
• 2006

In this paper, a methodology for the efficiency improvement of the photovoltaic system without adding some elements or increasing the cost comparing with the conventional system is discussed. It is suggested the optimal photovoltaic module configuration through its performance analysis, and also the suitable maximum power point tracking (MPPT) voltage considered the system cost and the efficiency of the converter. The high efficiency photovoltaic system by using the parallel power transfer (PPT) based MPPT converter is proposed and analyzed theoretically comparing with the conventional Buck type MPPT converter. Finally, it is designed and implemented the proposed photovoltaic system for supplying DC 48V by using the PPT based MPPT converter. And the effect of the efficiency improvement and the usefulness of the proposed system is proved through some preliminary simulation and experiment results.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.26-38
• /
• 2000

전파 방해장치(jammer)의 핵심 부품이라 할 수 있는 광대역 고출력 증폭기는 초소형화, 초고주파화 및 초고출려고하하는 다양성을 각각 다른 형태의 증폭장치에서 실현하고 있다. 이 논문에서는 먼저 진공 고출력 증폭기를 반도체 증폭기와 비교하며 각각의 영향권에서 대해 비교하였다. 본론에서는 첫째로 초소형화되어가는 광대역 TWT와 MMIC와 같은 반도체소자와 연합하여 효율이 높은 초소형 고출력(>100W CW) 증폭기의 혁신을 일으키는 MPM(Microwave Power Module)을 소개하였고 둘째로는 고출력(>kW)으로 초고주파화(밀리미터파) 되어가는 Gyro-TWT를 소개하였다. 세째로 원리적으로는 현재 무기체계의 전면적인 수정을 불가피하게 할지 모르는 초고출력화(>GW) 되어가는 HPM(High Power Microwaves)이 소개되었다. 마지막으로 한국에서의 고출력 증폭기에 관련된 연구개발 상황과 TWT국산화에 대한 현황이 소개되었다.