• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1133-1135
• /
• 2004

Superconducting transmission power cable is one of interesting parts in power application using high temperature superconducting wire. One of important parameters in high-temperature superconducting (HTSC) cable design is transport current distribution because it is related with current transmission capacity and ac loss. In this paper, the transport current and magnetic field distributions at conducting layers were investigated through the analysis of the equivalent circuit for HTSC power cable with shield layer. The transport current distribution due to the pitch length and winding direction was improved in case of HTSC power cable with shield layer.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.123-128
• /
• 2019

Currently mobile services are on the verge of full commercialization ahead of 5G mobile communication (5G). The first goal could be to preempt the 5G market through realistic media services utilizing VR (Virtual Reality) and AR (Augmented Reality) technologies that users can most easily experience. Basically this movement is based on the advanced development of smart devices and high quality graphics processing computing power of mobile application processors. Accordingly, the importance of mobile GPUs is emerging and the most concern issue becomes a model for predicting the power and performance for smooth operation of high quality mobile contents. In many cases, the performance of mobile GPUs has been introduced in terms of power consumption of mobile GPUs using dynamic voltage and frequency scaling and throttling functions for power consumption and heat management. This paper introduces several studies of mobile GPU performance prediction model with user-friendly methods not like conventional power centric performance prediction models.

• 한국항공우주학회지
• /
• 제40권9호
• /
• pp.789-799
• /
• 2012

본 연구에서는 전기 항공기에 사용하기 적합한 높은 출력밀도를 발생시키는 고온초전도 모터를 설계하고 이를 항공기에 적용하는 것이 가능한지를 확인하는 연구를 수행하였다. 설계된 모터는 이트륨 바륨 구리 산화물 판, 비스무트-2223 산화물로 이루어진 초전도 코일을 사용하고, 철심을 사용하지 않는 공기 냉각 전기저항성 전기자를 사용하였다. 고온 초전도 판과 코일 쌍을 회전축 방향으로 증가시켜, 180 마력, 2700 분당회전수의 출력을 발생시키는 세스나급 항공기에 사용하는 O-360엔진과 18000 마력, 5000 분당회전수의 B-737급 항공기에 사용하는 CFM56엔진을 대체할 수 있는 동일 출력을 발생시키도록 설계하였다. 또한 기존 엔진의 출력밀도와 고온초전도 모터의 출력밀도를 비교하여 고온초전도 모터의 항공기 적용가능성을 평가하였다.

• 한국재료학회지
• /
• 제15권12호
• /
• pp.814-817
• /
• 2005

In order to enhance energy efficiency in high electric conversion devices such as Power transformers, which need to have high power properties, an alloy design approach in $Pb(Zr,Ti)O_3(PZT)$ base ceramic system was attempted $0.03Pb(Sb_{0.5}Nb_{0.5})O_3-0.03Pb(Mn_{1/3}Nb_{2/3})O_3-(0.94-x)PbTiO_3-xPbZrO_3$[PSN-PMN- PZT] ceramics were synthesized by conventional bulk ceramic processing technique. To improve power properties, the various Zr/Ti ratio was varied ]lear their morphotropic phase boundary (MPB) composition of PSN-PMN-PZT system and their effects on subsequent piezoelectric and dielectric properties for the transformer application at high power were systematically investigated using an impedance analyzer. Microstructure and phase information were characterized using X-ray diffractometer (XRD), a scanning electron microscope (SEM) and others. When the Zr/Ti ratio was 0.415/0.465, the value of $Q_m\;and\;k_p$ were shown to reach to the maximum, indicating that this alloy design can be a feasible composition :or high power transformer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.565-566
• /
• 2008

The high efficiency power management IC(PMIC) for Moblie application is proposed in this paper. PMIC is controlled with PWM control method in order to have high power efficiency at high current level. The saw-tooth generator is made to have 1.2 MHz oscillation frequency and full range of output swing from ground to supply voltage(VDD:3.3V). The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on Voltage-mode PWM control circuits, achieved the high efficiency near 95% at 100mA output current. DC-DC converter is designed with LDO in stand-by mode which fewer than 1mA for high efficiency.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.97-100
• /
• 1999

AC to DC single phase PWM converter for traction application requires rated high power and voltage. Therefor, series or parallel operation converters are necessary with considering the limitation of the power device specification. This paper compares the characteristic between two parallel operation of conventional PWM converter and Single phase three level converter about comparison of power circuit, cooling system control method and harmonic current by computer simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.91-94
• /
• 2000

This paper introduces the design of low-power, fast-locking delay locked-loop using complementary pass transistor logic(CPL). Low-power design has become one of the most important in the modem VLSI application. CPL has the advantage of fast speed, high density, and low power with signal buffering between stages. Based on this analysis, we concluded that the I/O performance can be beyond 500㎒, 2-poly, 2-metal 0.65$\mu\textrm{m}$, 3.3V supply.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1814_1816
• /
• 2009

ZigBee is a technology that is being rapidly developed since its power consumption is low and the stability of its communication is high. However, documented data which is coded using conventional programming languages such as C or assembly programming language would not be able to fulfill the various requirements upon application development by ZigBee. Unified Modelling Languge (UML) could be one of the alternatives to solve this problem. UML provides a variety of diagrams by which the results of the software development can be presented visually and by which the developers can communicate more spontaneously. This paper shows the results of an ongoing study into the application of model-driven methods for ZigBee Application. Also, this paper shows that this approach is feasible by comparing memory usage, latency, and power consumption of UML modelling code with those of handwritten code.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.139-142
• /
• 1999

Recently, the application of the linear machine for industrial field is remarkable increased, especially for the gantry machine and machine tool system. In these application, high precise position control performance is essentially required in steady/transient state. This paper presents the generalized PID position control algorithm which have rare sensitivity to mass and disturbance. Through the experimental results, it is shown that the proposed algorithm have good performance for the linear machine drives in the steady state and transient state in spite of the load mass varing.