• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1266-1268
• /
• 2004

This is a thesis that a quarter-brick size of 100W class open-frame type on board power module comprising telecommunication application is reported. The input voltage is established between 36 and 75 in range in order for power module to be utilized for the telecommunication application, and output were set at 3.3V and 30A. A number of parts used for transformer, inductor, and hit sink are composed of PCB in order for DC-DC converter to be lowered below 8 mm. A constant current control circuit was annexed to the system as well as basic protection prototypes such as over-voltage, over-current, and over-temperature were well considered to enhance more credibility, and were tested. As a result, high circuit performance and credibility turned out to be significant.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.45-52
• /
• 2023

고가의 발전기를 사용하는 발전 방법은 일부 도서의 경우 전력수요 증가로 인한 예비전력 부족과 고비용의 디젤 발전기 운영과 같은 문제점들을 안고 있다. 이를 해결하기 위한 방법으로 폐열을 열원으로 이용하는 ORC시스템 적용을 통하여 발전 설비의 효율을 증가시킬 필요가 있다. 따라서 가격 경쟁력과 고신뢰성의 ORC 발전시스템의 현장 기술이 요구되며 발전기의 최적화 기술의 효과가 크기 때문에 본 연구에서는 2개의 발전기 설계를 수행하여 최적화된 30kW 출력을 갖는 고효율의 발전기를 얻었다. 2개의 설계된 모델들에 대한 모의 데이터 비교 결과 발전기의 12,000rpm 기준에서 SPM factor 46.2%의 경우 약 23.2kW의 출력과 92.1%의 효율을 보였고, SPM factor 44.46%의 경우 발전기의 출력은 27.9kw와 93.6%의 효율을 확인하였다. SPM factor 44.46%를 갖는 개선된 설계모델의 시제품 검증을 위하여 110kW 모터 동력계를 갖는 시제품 시험시스템을 설치하였으며 2,000rpm 기준 정격용량 25kW의 조건에서 92.08% 효율을 얻었으며, 시제품 발전기의 시험결과 발전기 설계의 유효성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.170-175
• /
• 2012

Power MOSFET is develop in power savings, high efficiency, small size, high reliability, fast switching, low noise. Power MOSFET can be used high-speed switching transistors devices. Recently attention to the motor and the application of various technologies. Power MOSFET is devices the voltage-driven approach switching devices are design to handle on large power, power supplies, converters, motor controllers. In this paper, design the 600 V Planar type, and design the trench type for realization of low on-resistance. For both structures, by comparing and analyzing the results of the simulation and characterization.

• Journal of Power Electronics
• /
• 제6권2호
• /
• pp.95-103
• /
• 2006

In this paper, a novel prototype of auxiliary switched capacitor assisted voltage source soft switching PWM Single-Ended Push Pull (SEPP) series capacitor compensated load resonant inverter with two auxiliary edge resonant lossless inductor snubbers is proposed and discussed for small scale consumer high-frequency induction heating (IH) appliances. The operation principle of this inverter is described by using switching mode equivalent circuits. The newly developed multi resonant high-frequency inverter using trench gate IGBTs can regulate its output AC power via constant frequency edge-resonant associated soft switching commutation by using an asymmetrical PWM control or duty cycle control scheme. The brand-new consumer IH products which use the newly proposed edge-resonant soft switching PWM-SEPP type series load resonant high-frequency inverters are evaluated using power regulation characteristics, actual efficiency vs. duty cycle and input power vs. actual efficiency characteristics. Their operating performance compared with some conventional soft switching high-frequency inverters for IH appliances is discussed on the basis of simulation and experimental results. The practical effectiveness of the newly proposed soft switching PWM SEPP series load resonant inverter is verified from an application point of view as being suitable for consumer high-frequency IH appliances.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.97-107
• /
• 2001

화력발전소, 수력발전소, 그리고 펄프 및 제지 산업분야 발전 프랜트들은 노후화된 발전기 여자시스템으로 인해서 많은 보수 정비업무에 직면해 있다. 이러한 노후 발전설비의 수명 연장을 위해 한전 전력연구원 3중화 디지털 정지형 여자시스템을 개발하였다. 이 논문에서는 3중화 정지형 여자시스템을 구성하는 전력전자 제어 소자(싸이리스터, GTO), 여자 변압기, 3중화 제어시스템의 설계개념과 현장 적용 결과에 대해서 기술하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1736-1738
• /
• 2002

Oil-filled power cables and XLPE power cables have been globally applied for extra-high-voltage underground power transmission lines. The application of XLPE cables for the transmission lines have been largely increased at the domestic and overseas projects because of some issues. O.F cables have some week points, related with the issues of the environmental pollution and the needed maintenance work, even though they have been applied for several ten years and their reliability has been proven. Meanwhile, the demands on XLPE power cables increase as their manufacturing technologies have been improved and their simplicity of installations has been focused on. In Korea, for the first time, the 275kV XLPE cable is to be applied at an overseas power plant project. This paper introduces the project profile, the design of the XLPE cable and its accessories, the cable system design and the installation design.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.246-256
• /
• 2007

In this paper, a novel type auxiliary active edge resonant snubber assisted zero current soft switching pulse modulation Single-Ended Push Pull (SEPP) series load resonant inverter using IGBT power modules is proposed for cost effective consumer high-frequency induction heating (IH) appliances. Its operating principle in steady state is described by using each switching mode's equivalent operating circuits. The new multi resonant high-frequency inverter with series load resonance and edge resonance can regulate its high frequency output power under a condition of a constant frequency zero current soft switching (ZCS) commutation principle on the basis of the asymmetrical pulse width modulation (PWM) control scheme. Brand-new consumer IH products using the proposed ZCS-PWM series load resonant SEPP high-frequency inverter using IGBTs is evaluated and discussed as compared with conventional high-frequency inverters on the basis of experimental results. In order to extend ZCS operation ranges under a low power setting PWM as well as to improve efficiency, the high frequency pulse density modulation (PDM) strategy is demonstrated for high frequency multi-resonant inverters. Its practical effectiveness is substantially proved from an application point of view.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.63-66
• /
• 2004

The extraordinary intrinsic properties of SiC have made this material a suitable choice to use in high temperature, high frequency, and high voltage applications. In additional to these, SiC could be employed as the based material for nonvolatile memory applications, mainly due to its extremely low thermal-generation rate at room temperature. In this paper, the reasons of using this material in this particular application is presented and the development of the application over the past fifteen years is reviewed.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.701-707
• /
• 2015

Recently, it has to design the motor to raise power density because of many necessary application, such as home appliances and hybrid electric vehicles. Power of motor is made up of the torque and speed. So, if the motor which is the same size and shape is designed to raise speed, power and power density are increase.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.114-121
• /
• 2004

Switched reluctance motors have received much attention as a driving means for various industrial applications because they have simple construction, low cost and high efficiency. Nevertheless, the requirements of drive converters make it difficult to lower the overall system cost as compared with the DC motor application. Single phase switched reluctance motors (SPSRMs) provide a solution to the high cost problem since the number of switching power devices can be reduced and consequently the trials for application are increased. However, research involving SPSRMs, especially in the area of design work, is insufficient. This paper introduces a novel design methodology of single phase SRM. The design work for SPSRM comprises the determination of many variables such as stator and rotor pole arc as well as on, off and so on. Managing all variable combinations leads to lengthy computation time and a fault in the design process. For that reason, a reliable technique and brief procedure term are required in SPSRM design.