• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.519-524
• /
• 2003

Porous carbon with high surface area and pore volume was prepared by a reverse replication process and its toluene equilibrium adsorption behavior was investigated. The preparation process of the porous carbon was composed of fellowing sub-processes in series: synthesis and template preparation of silica gel, impregnation and polymerization of DVB monomer in silica template, carbonization of DVB polymer in a silica-polymer composite, and HF-assisted selective etching of silica in carbon-silica composite. The prepared porous carbon was nano porous and had ultrahigh specific surface area (2007 ㎡/g) and large pore volume (3.07 ㎤/g). The nanoporous carbon showed rapid toluene adsorption rate and good toluene adsorption capacity, compared with a commercial Y-type zeolite. In the present study, a reverse replication process to prepare nanoporous carbons will be introduced and its application potential as a gas adsorbent will be discussed.

• 한국염색가공학회지
• /
• 제21권2호
• /
• pp.7-13
• /
• 2009

The effects of 0.1g/dl nonionic surfactant solutions on liquid wetting and retention properties of wool fabric are reported. The 10 different nonionic surfactants (Span 20, Tween 20, 40, 60, 80, 21, 61, 81, 65, 85), wool cloth (EMPA 217), and wool soiled cloth (EMPA 107) are used in the study. Both EMPA 217 and 107 have water contact angle($\Theta$)>$90^{\circ}$, which indicates that water spreading over a fabric surface and penetration into the fabric rarely occur. However, EMPA 217 and 107 are easily wetted with perchloroethylene(PCE) having very low values of $\Theta$'s and high values of liquid retention. Water wetting properties are greatly improved by adding nonionic surfactants into the system. Generally, hydrophilic surfactants which have low number of carbon atoms or unsaturated hydrophobic structures are effective in improving water wetting of wool fabrics. The water retention of EMPA 217 and 107 in surfactant solutions have positive relations with $cos{\Theta}$, adhesion tension, and work of adhesion. 40.3% pore volume of EMPA 217 and 26.1% pore volume of EMPA 217 can be filled with water even when we assume $cos{\Theta}=1$ (${\Theta}=0^{\circ}$).

• 한국대기환경학회지
• /
• 제32권2호
• /
• pp.176-183
• /
• 2016

Activated carbon fibers (ACFs) for $CO_2$ adsorption were prepared from polyacrylonitrile (PAN) fiber through the systematic processes such as oxidation, activation and amination with the focus on the formation of nitration functional groups. Textural analysis of test samples revealed the decrease of specific surface area and pore volume by chemical activation including amination. The ratio of micropores to the total volume was 0.85 to 0.91, which was high enough with the pore size of 1.57 to 1.77 nm. Nitrogen compounds such as imine, pyridine and pyrrole presenting favorable interforces to $CO_2$ molecules were formed throughout the whole preparation steps. The aminated ACF adsorbent showed the enhanced adsorption capacity, 0.40 mmol/g for low-level $CO_2$ flow (3000 ppm) at room temperature. Selectivity of $CO_2$ against dry air ($O_2$ & $N_2$) also increased from 1.00 to 4.66 by amination.

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.47-54
• /
• 2006

Activated carbon fibers (ACFs) with high surface area and pore volume were modified with metal Ni impregnation and fluorination and investigated hydrogen storage properties by volumetric method. Micropore volume values of ACFs obtained from surface modification with Ni impregnation and fluorination were decreased 9 and 35 %, respectively. Hydrogen storage capacities of fluorinated ACFs were slightly changed, on the other hand, that of Ni impregnated ACF was considerably increased. It means that hydrogen was not only adsorbed on ACF surface, but also on Ni metal surface by means of dissociation. Although the microphone volume of ACF modified with fluorination was decreased, its hydrogen storage were found not to be changed compared with fresh ACF. These results indicated that the surface of ACF after fluorination modification may be strongly attracted hydrogen due to high electronegativity of fluorine. Therefore, it was proven that hydrogen storage capacity was related with micropore volume and surface property of carbon materials as well as specific surface area.

• 한국식품조리과학회지
• /
• 제13권1호
• /
• pp.64-69
• /
• 1997

벼 8품종의 현미와 백미로 쌀빵을 제조하여 쌀빵가공성에 대한 벼 품종간 및 현 백미간 비교를 실시하고 관련특성간 상관관계를 살펴 보았다. 벼 품종간에는 제빵성의 차이가 있으나 현미와 백미간에는 유의한 차이가 없었다. 그러나 품종에 따라서는 현미와 백미간에 쌀빵특성의 현저한 차이를 나타내었다. 찰벼 품종인 한강찰벼는 백미로는 쌀빵의 제조가 불가능하였으나 현미로는 다른 어떤 품종 보다도 제빵성이 우수한 결과를 얻었다. 메벼 품종들 중에서는 AC 27, IR 44, 수원조가 백미의 제빵성이 우수하였고, 이 세 품종을 제외하고는 모두 백미보다 현미로 쌀빵을 만들 경우 가공특성이 좋은 경향이 있었다. 쌀의 일반성분 및 쌀빵의 제 특성 간의 상관성을 현미와 백미에 대해 별도로 살펴보면, 현미의 경우에는 부피 증가율이 큰 쌀빵 반죽일수록 푹신한 감이 있는 쌀빵 제조가 가능하였고, 촉촉한 쌀빵일수록 부드럽고 응집성이 높은 경향이었다. 백미의 경우에는 단백질 함량이 낮을수록 촉촉한 느낌의 쌀빵이 되는 경향이었으며, 지질함량이 높을수록 기공의 크기가 작고 균일하며 탄력성이 적은 쌀빵이 제조되는 경향이 있었다 또한 쌀빵 성형이 양호할수록 경도 및 씹힘성이 낮은 부드러운 빵이되는 경향이었으며, 기공의 크기가 균일할수록 기공의 크기가 작으면서 푹신한 감이나 탄력성이 낮은 빵이 되는 경향이었다.

• Carbon letters
• /
• 제22권
• /
• pp.70-80
• /
• 2017

Activated carbons (ACs) have been used as electrode materials of electric double-layer capacitors (EDLC) due to their high specific surface areas (SSA), stability, and ecological advantages. In order to make high-energy-density ACs for EDLC, petroleum pitch (PP) pre-carbonized at $500-1000^{\circ}C$ in $N_2$ gas for 1 h was used as the electrode material of the EDLC after KOH activation. As the pre-carbonization temperature increased, the SSA, pore volume and gravimetric capacitance tended to decrease, but the crystallinity and electrode density tended to increase, showing a maximum volumetric capacitance at a medium carbonization temperature. Therefore, it was possible to control the crystalline structure, SSA, and pore structure of AC by changing the pre-carbonization temperature. Because the electrode density increased with increasing of the pre-carbonization temperature, the highest volumetric capacitance of 28.4 F/cc was obtained from the PP pre-carbonized at $700^{\circ}C$, exhibiting a value over 150% of that of a commercial AC (MSP-20) for EDLC. Electrochemical activation was observed from the electrodes of PP as they were pre-carbonized at high temperatures above $700^{\circ}C$ and then activated by KOH. This process was found to have a significant effect on the specific capacitance and it was demonstrated that the higher charging voltage of EDLC was, the greater the electrochemical activation effect was.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.271-273
• /
• 2012

This paper is to investigate the effect of waste cooking oil(WCO) on carbonation resistance of high volume fly ash and blast furnace slag concrete. WCO and paint were applied for carbonation resistance materials. As expected, the application of WCO to the concrete help it reduce carbonation depth remarkably, regardless of mixture types. This may be due to the fact that WCO makes the capillary pore block by activating saponification. It is found that the degree of carbonation reduce due to WCO is much higher than the case by Paint.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.617-623
• /
• 2017

Mesoporous carbon nanofibers as electrode material for electrical double-layer capacitors(EDLCs) are fabricated using the electrospinning method and carbonization. Their morphologies, structures, chemical bonding states, porous structure, and electrochemical performance are investigated. The optimized mesoporous carbon nanofiber has a high sepecific surface area of $667m^2\;g^{-1}$, high average pore size of 6.3 nm, and high mesopore volume fraction of 80 %, as well as a unifom network structure consiting of a 1-D nanofiber stucture. The optimized mesoporous carbon nanofiber shows outstanding electrochemical performance with high specific capacitance of $87F\;g^{-1}$ at a current density of $0.1A\;g^{-1}$, high-rate performance ($72F\;g^{-1}$ at a current density of $20.0A\;g^{-1}$), and good cycling stability ($92F\;g^{-1}$ after 100 cycles). The improvement of the electrochemical performance via the combined effects of high specific surface area are due to the high mesopore volume fraction of the carbon nanofibers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.107-108
• /
• 2011

The purpose of present study is to examine the application of effective curing to hardener-free epoxy-modified mortars. The epoxy-modified mortars are prepared with polymer-cement ratios, subjected to two types of curing conditions, and tested for compressive, flexural and tensile strengths. As a result, hardener-free epoxy-modified mortars with steam curing is markedly improved with increasing air-dry curing period. High strength development of the epoxy-modified mortars may be achieved by the dense microstructure by cement and the hardener of the epoxy resin in the mortars.

• Carbon letters
• /
• 제2권1호
• /
• pp.55-60
• /
• 2001

Graphite intercalation compounds (GIC) were prepared by direct reaction of $SO_3$ gas with flake graphite. The intercalated $SO_3$ molecules were ejected by rapid heating to $950^{\circ}C$ under an oxidizing atmosphere for about 1 minute, resulting in surprisingly high expansion in the direction of c-axis. The characteristics of the micro-structure and pore size distribution were examined with a SEM and mercury intrusion porosimetry. The XRD analysis and spectroscopic analysis were used for the identification of the graphite and surface chemistry state. The pore size distribution of the exfoliated graphite (EG) was a range of $1{\sim}170{\mu}m$. The higher expanding temperature the higher expanded volume, so oil sorption capacities were 58.8 g of bunker-C oil and 34.7 g of diesel oil per 1 g of the the EG. The sorption equilibrium was achieved very rapidly within several minutes. As the treatment temperature increases, bulk density decreases.