• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.53-61
• /
• 2006

This paper is proposed adaptive fuzzy-neuro controller for high performance of induction motor drive. The design of this algorithm based on fuzzy-neural network controller that is implemented using fuzzy control and neural network. This controller uses fuzzy nile as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive fuzzy-neuro controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.706-715
• /
• 2001

TCP typically offers reasonable end-to-end performance to users regardless of the bandwidth and error characteristics of particular network technology, The robustness of TCP has contributed to its success in the internet environment. The role of communications is already well established in the office environment. With the advent of cheap, affordable broadband communications and the increasing complexity of consumer goods, it seems natural to extend the network into homes. In-home networking means a high-speed communication among the digital appliances within a home. Introduction of application over high-speed home network using TCP/IP protocol is increasing. The integrated environment of internet and home network is demanding as well. We have validated TCP model over high speed home network environment, investigated the throughput behavior of TCP over IEEE 1399 home networks, and evaluated a potential solution for high performance of TCP over IEEE 139t home networks. The simulation model has produced several interesting results in the performance of TCP over IEEE 1394 home network.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10b
• /
• pp.1351-1354
• /
• 2001

본 논문에서는 Differentiated Services (DiffServ) 망의 edge 라우터에 적용되는 3 단계 트래픽 제어기 (3 phased traffic conditioner : 3PTC)를 제안하였다. 제안된 3PTC 는 TCP 트래픽의 예약된 대역폭 (reserved rate) 의 차이, UDP/TCP의 상호작용, RTT 및 집합된 트래픽을 구성하는 작은 트래픽 수에 의한 영향을 최소화함으로써, DiffServ 망에서 제공하는 Assured Services 사용자들에게 공정한 대역폭을 보장해 줄 수 있다. 3PTC 는 토큰버킷 단계, 확률결정 단계, 그리고 버퍼관리 단계로 이루어져 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.348-351
• /
• 2000

In order to enact the technical standard of RF(Radio Frequency) in domestic, this paper analyzes the trends and the technical specifications of high performance radio local area network, for example HIPERLAN(Europe), U-Nll(U.S.A), broadband mobile access system(Japan). The contents of this paper are helpful to make a rule for the desirable national technical standard of high performance radio local area network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.893-910
• /
• 1996

Recently, there ary many researches on local area multichannel network as WDM technology developes. An ideal media access protocol in a multichannel network is one that shows short access delay under low load and high throughput under heavy load. This paper proposed a new media access protocol for WDM passive star coupler network. The proposed one is a random access rpotocol based on reservation. Access delay is short under low load by using random access method, and high throughput is achieved under heavy load by usin greservation access. Analytic model for the performance analysis of the proposed protocol is developed and performance of the proposed protocol is compared with the previous ones. The effect on the performance of the number of the nodes and channels, and the number of transceivers in each node are analyzed.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.28-32
• /
• 2007

This research proposed that development of wireless condition monitoring system using WLAN network. It offers the prospect of improved performance that removed a current a coaxial cable and reduced overall cost of condition monitoring. Recently, there is an interesting concern for wireless system as an infrastructure technology construct ubiquitous computing environment in the future. High performance computing board makes minimization with integrate of a various functions which support wireless LAN network. Instead of wired coaxial cable using measurement system in industry, wireless LAN network assists industry automation and engineer's convenience. Developed system adapted wireless LAN network on shipboard with engine room and deck house, it also executes wireless measurement test on 8500TEU containership.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.95-103
• /
• 2017

The PCI Express is a widely used system bus technology that connects the processor and the peripheral I/O devices. The PCI Express is nowadays regarded as a de facto standard in system area interconnection network. It has good characteristics in terms of high-speed, low power. In addition, PCI Express is becoming popular interconnection network technology as like Gigabit Ethernet, InfiniBand, and Myrinet which are extensively used in high-performance computing. In this paper, we designed and implemented a evaluation platform for interconnect network using PCI Express between two computing nodes. We make use of the non-transparent bridge (NTB) technology of PCI Express in order to isolate between the two subsystems. We constructed a testbed system and evaluated the performance on the testbed.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.263-268
• /
• 2022

Precise Point Positioning-Real Time Kinematic (PPP-RTK) is a high accuracy positioning method that combines RTK and PPP to overcome the limitations on service coverage of RTK and convergence time of PPP. PPP-RTK provides correction data in the form of State Space Representation (SSR), unlike RTK, which provides measurement-based Observation Space Representation (OSR). Due to this, PPP-RTK has an advantage that it can transmit less data than RTK. So, recently, several techniques for PPP-RTK have been proposed. However, in order to utilize PPP-RTK techniques, performance analysis of these in a real environment is essential. In this paper, we implement the local network PPP-RTK and analyze the positioning performance according to the distance within 100 km from the reference station in Korea. As results of experiment, the horizontal and vertical 95% errors of local network PPP-RTK were 6.25 cm and 5.86 cm or less, respectively.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.113-130
• /
• 2006

Recently with the explosive growth of Internet applications, the attacks of hackers on network are increasing rapidly and becoming more seriously. Thus information security is emerging as a critical factor in designing a network system and much attention is paid to Network Intrusion Detection System (NIDS), which detects hackers' attacks on network and handles them properly However, the performance of current intrusion detection system cannot catch the increasing rate of the Internet speed because most of the NIDSs are implemented by software. In this paper, we propose a new high performance network intrusion using Network Processor. To achieve fast packet processing and dynamic adaptation of intrusion patterns that are continuously added, a new high performance network intrusion detection system using Intel's network processor, IXP1200, is proposed. Unlike traditional intrusion detection engines, which have been implemented by either software or hardware so far, we design an optimized architecture and algorithms, exploiting the features of network processor. In addition, for more efficient detection engine scheduling, we proposed task allocation methods on multi-processing processors. Through implementation and performance evaluation, we show the proprieties of the proposed approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.