• 한국분무공학회지
• /
• 제17권4호
• /
• pp.197-204
• /
• 2012

The vast stores of biomass available in the worldwide have the potential to displace significant amounts of fuels that are currently derived from petroleum sources. Fast pyrolysis of biomass is one of possible paths by which we can convert biomass to higher value products. The wood pyrolysis oil (WPO), also known as the bio crude oil (BCO), has been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of WPO in a diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the WPO. One of the easiest way to adopt WPO to diesel engine without modifications is emulsification of WPO with diesel or bio diesel. In this study, a DI diesel engine operated with diesel, bio diesel (BD), WPO/BD emulsion was experimentally investigated. Performance and gaseous & particle emission characteristics of a diesel engine fuelled by WPO/BD emulsion were examined. Results showed that stable engine operation was possible with emulsion and engine output power was comparable to diesel and bio diesel operation.

• 한국항공우주학회지
• /
• 제33권5호
• /
• pp.99-105
• /
• 2005

장기체공 소형 무인기 실용화를 위해서는 연료소비율이 우수한 엔진 개발이 매우 중요하다. 본 연구에서는 4행정 글로우 플러그 엔진을 가솔린 엔진으로 개조하였다. 고공에서의 엔진 성능예측에 필요한 시뮬레이션 프로그램 개발을 위하여 지상에서 엔진 성능을 측정하였다. 측정결과 고속에서 윤활부족으로 인하여 엔진 마찰력이 급격히 증가함을 알 수 있었다. 지상 시험결과를 토대로 개발된 엔진성능 예측 프로그램에 의하면 고도가 상승할수록 연료소비율이 악화되는데 이는 윤활부족에 의한 마찰력 손실은 고도에 관계없이 거의 일정하기 때문이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.196-201
• /
• 2003

Axial fans are widely used for automotive engine cooling device due to their ability to produce high flow rate to keep engine cool. At the same time, the noise generated by these fans causes one of the most serious problems. Especially, engine cooling fan noise in idle condition of a car is noticeable. Therefore, the high efficient and low-noise fan is seriously needed. When a new fan system is designed, system resistance and non-uniform inflow are the key factors to get the high performance and low noise fan system. In this study, experimental study on the fan and system was carried out and brought a successful result of performance and noise from a designed fan. And through the modification of the fan system, the fan produced more flow rate and became less noisy.

• 한국분무공학회지
• /
• 제26권4호
• /
• pp.204-211
• /
• 2021

Lean combustion performance of natural gas and hydrogen was compared in a spark-ignition engine. The lean combustion engine operation with natural gas was limited due to combustion instability at an excess air ratio (EAR) above 1.8. The total hydrocarbon (THC) emissions increased significantly with increasing EAR. The nitrogen oxides (NO_X) emissions were also high due to the limitation of increasing EAR. The lean combustion engine operation with hydrogen showed superior combustion stability as well as low THC and NO_X emissions, even at high EARs. However, boosting technology was required to reach the high EARs.

• 에너지공학
• /
• 제14권3호
• /
• pp.180-186
• /
• 2005

실험에 사용된 엔진은 $3000\~12000$ RPM의 광범위한 회전수범위를 가지고 있어 엔진성능을 향상시키기 위해서는 다양한 제어장치가 필요하다. SCV는 저회전수에서 엔진의 성능을 개선시키기 위한 방법 중의 하나로 자주 언급되어지고 있다. 본 연구에서는 소형고속엔진에 SCV를 장착하여 저회전수 범위에서 SCV가 엔진에 미치는 영향에 대해 조사하였다. 실험에서는 4valve SOHC 공랭식 단기통 엔진에 SCV의 형상에 따른 스월 강도, 출력, 연료소비율, 배기가스를 조사하였다 그 결과 SCV의 사용 가능 범위 5000 RPM에서 연료소비율 $9\%$의 저감효과를 보았다.

• 한국가스학회지
• /
• 제15권4호
• /
• pp.33-38
• /
• 2011

The introduction of alternative fuels is beneficial to overcome the fuel shortage and reduce engine exhaust emissions. LPG and CNG are relatively clean fuel and considered as most promising alternative automotive fuels worldwide because of its emission reduction potential and lower fuel price compared to gasoline. Now a day’s adaptation of dual fuel approach is the growing as common trend. The two fuels can be successfully implemented with existing gasoline engine with little modification. The present study was done to analyze the performance and emissions analysis of a multi cylinder spark ignition engine fuelled with the benefits of CNG and LPG aseffective alternate automotive fuels by simply using them in an unmodified petrol engine. The test results indicate, the energy content of CNG and LPG is the most limiting factor in acceptance for fuel economy and performance reasons. Thermal efficiency was high for CNG lowest for gasoline and LPG between the two. BSFC, CO and HC were low and NOx was high for CNG and low for gasoline, LPG lies between the two.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.431-438
• /
• 2012

고기동 무인항공기용 터보제트엔진의 고성능 운용을 위한 비선형 제어기를 설계하였다. 제트엔진의 비선형특성을 제어기 설계에 반영하기 위해 당해엔진의 동적해석코드를 개발하였고 이를 이용한 선형모델로부터 선형해석의 한계성을 검증함으로써 비선형 제어기 설계의 당위성을 보였다. PI형 퍼지제어기를 일반 미분제어기와 결합하여 효율적인 퍼지제어기를 설계하였으며, 일반 PID제어기와 비교하여 압축기서지 및 연소정지영역, 터빈온도의 제한 등 안전운전 범위 내 운전을 보장하면서도 월등한 제어성능을 보임으로써 설계된 퍼지제어기의 유용성을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.481-487
• /
• 1997

The development of transportation and construction equipment has required higher engine power and lower operation cost. The sound which the engine emits often degrade the performance of the whole system which adopts that engine. Specially the marine engine requires high restriction on the noise level for the customer's comfort and safety. The noise and vibration of Diesel engine must be carefully considered in the early design step. The double antivibration system is effective to increase the efficiency of antivibration, and the acoustic enclosure for reducing the noise level. 2 DOF model was effective to estimate the antivibration performance, which allows to determine the mass of the engine bed and the specification of the engine mount. The mass distribution of the enclosure system can be considered effectively by using the FEM model. The design contains structurally rigid engine bed by FEM, which is for reducing the influence of the flexible vibration, rubber mount selection as well as the acoustic enclosure design.

• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.15-21
• /
• 2006

Parametric cycle analysis of a dual-spool, mixed exhaust turbofan engine with turbine blade cooling were described to investigate the effect of turbine blade cooling on the engine performance such as specific thrust and thrust specific fuel consumption. Coolant of low pressure turbine triggers high engine performance loss and cooling effect loss in high pressure turbine. Therefore low pressure turbine coolant should be much more considered for effective design.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.151-152
• /
• 2012

Collectors connected to diesel engine exhaust pipe for application of PM reduction facilities which was used to reduce PM from the exhaust gas produced from ship, Filtration performance of PM was tested. In this system, it was confirmed that the bag house can remove over 90 percent of PM from a lot of high temperature and high pressure gases produced in diesel engine. The results obtained from performance test show the potential possibility for commercialization of ceramic filter collectors which is applied to reduction facilities of flue gas produced from a diesel engine on the ship.