• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.12
• /
• pp.133-140
• /
• 2013

Cascaded H-Bridge multi-level inverters can be implemented through the series connection of single-phase modular power bridges. In recent years, multi-level inverters are becoming increasingly popular for high power applications due to its improved harmonic profile and increased power ratings. This paper presents a control method for balancing the dc-link voltage and ride-through enhancement, a modified pulse width-modulation Compensation algorithm of cascaded H-bridge multi-level inverters. During an under-voltage protection mechanism, causing the system to shut down within a few milliseconds after a power interruption in the main input sources. When a power interruption occurs finish, if the system is a large inertia restarting the load a long time is required. This paper suggests modifications in the control algorithm in order to improve the sag ride-through performance of ac inverter. The new proposed strategy recommends maintaining the DC-link voltage constant at the nominal value during a sag period, experimental results are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.469-474
• /
• 2006

In this paper, we develop a method that derive the average sector throughput of HSDPA system. This proposed method reflects the effects of AMC, scheduling and multi-code transmission, and is performed by simple calculation procedures such as link budget analysis. Link budget table is used to estimate a cell coverage in general. We modify the link budget table in order to calculate C/I of the user according to the location of the user in CDMA packet system employing AMC. Furthermore, we utilize the proposed method to analyze the effects of scheduling and multi-code transmission.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.30-41
• /
• 2011

In order to obtain more clear x-ray images, an antiscatter grid, which can absorb the scattered rays, is employed. In the high-resolution direct digital radiography, however, the artifacts due to the grid are visible. In this paper, within the methods of obtaining x-ray digital images by employing the rotated grids for the facility of grid artifact reduction, the previous work, where the frequencies of the artifact components on the boundary, is further analyzed and extended, and a min-max optimization for a given grid density is proposed. For practical grid densities, appropriate grid angles are provided and a grid artifact reduction algorithm is proposed for the appropriate grid angles. The proposed algorithm is tested for real x-ray digital images with a comparison, and can remove the grid artifacts while maintaining the resolution of the original image.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1222-1225
• /
• 2004

This paper presents multibit Sigma-Delta ADC using noise-shaped dynamic element matching(DEM). 5-bit flash ADC for multibit quantization in Sigma Delta modulator offers the following advantages such as lower quantization noise, more accurate white-noise level and more stability over single quantization. For the feedback paths consisting of DAC, the DAC element should have a high matching requirement in order to maintain the linearity performance which can be obtained by the modulator with a multibit quantizer. The DEM algorithm is implemented in such a way as to minimize additional delay within the feedback loop of the modulator Using this algorithm, distortion spectra from DAC linearity errors are shaped. Sigma Delta ADC achieves 82dB signal to noise ratio over 615H7z bandwidth, and 62mW power dissipation at a sampling frequency of 19.6MHz. This Sigma Delta ADC is designed to use 0.25um CMOS technology with 2.5V supply voltage and verified by HSPICE simulation.

• Journal of Power Electronics
• /
• v.12 no.2
• /
• pp.344-356
• /
• 2012

In recent years, multilevel technology has become an effective and practical solution in the field of moderate and high voltage applications. This paper discusses an APF with a three-level NPC inverter. Obviously, the application of such converter to APFs is hindered by the problem of the voltage unbalance of DC capacitors, which leads to system instability. This paper comprehensively analyzes the theoretical limitations of the neutral-point voltage balancing problem for tracking different harmonic currents utilizing current switching functions from the space vector PWM (SVPWM) point of view. The fluctuation of the neutral point caused by the load currents of certain order harmonic frequency is reported and quantified. Furthermore, this paper presents a close-loop digital control algorithm of the DC voltage for this APF. A PI controller regulates the DC voltage in the outer-loop controller. In the current-loop controller, this paper proposes a simple neutral-point voltage control method. The neutral-point voltage imbalance is restrained by selecting small vectors that will move the neutral-point voltage in the direction opposite the direction of the unbalance. The experiment results illustrate that the performance of the proposed approach is satisfactory.

• Journal of Information Processing Systems
• /
• v.12 no.3
• /
• pp.525-537
• /
• 2016

Data hiding is a wide field that is helpful to secure network communications. It is common that many data hiding researchers consider improving and increasing many aspects such as capacity, stego file quality, or robustness. In this paper, we use an audio file as a cover and propose a reversible steganographic method that is modifying the sample values using modulus function in order to make the reminder of that particular value to be same as the secret bit that is needed to be embedded. In addition, we use a location map that locates these modified sample values. This is because in reversible data hiding it needs to exactly recover both the secret message and the original audio file from that stego file. The experimental results show that, this method (measured by correlation algorithm) is able to retrieve exactly the same secret message and audio file. Moreover, it has made a significant improvement in terms of the following: the capacity since each sample value is carrying a secret bit. The quality measured by peak signal-to-noise ratio (PSNR), signal-to-noise ratio (SNR), Pearson correlation coefficient (PCC), and Similarity Index Modulation (SIM). All of them have proven that the quality of the stego audio is relatively high.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.3
• /
• pp.494-507
• /
• 2011

In this paper, we propose two schemes to reduce the complexity of fixed-complexity sphere decoder (FSD) algorithm in the ordering and tree-search stages, respectively, while achieving quasi-ML performance. In the ordering stage, we propose a QR-decomposition-based FSD signal ordering based on the zero-forcing criterion (FSD-ZF-SQRD) that requires only a few number of additional complex flops compared to the unsorted QRD. Also, the proposed ordering algorithm is extended using the minimum mean square error (MMSE) criterion to achieve better performance. In the tree-search stage, we introduce a threshold-based complexity reduction approach for the FSD depending on the reliability of the signal with the largest noise amplification. Numerical results show that in 8 ${\times}$ 8 MIMO system, the proposed FSD-ZF-SQRD and FSD-MMSE-SQRD only require 19.5% and 26.3% of the computational efforts required by Hassibi's scheme, respectively. Moreover, a third threshold vector is outlined which can be used for high order modulation schemes. In 4 ${\times}$ 4 MIMO system using 16-QAM and 64-QAM, simulation results show that when the proposed threshold-based approach is employed, FSD requires only 62.86% and 53.67% of its full complexity, respectively.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1042-1051
• /
• 2016

The mobile hotspot network (MHN), which is capable of providing a data rate of gigabits per second at high speed, is considered a potential use case of the future enhanced mobile broadband for 5G. Because a unidirectional network deployment has been considered for an MHN, non-orthogonal multiple access (NOMA) can be employed to improve the system performance. For a practical implementation of NOMA under an MHN highway scenario where multiple pieces of MHN terminal equipment are served through the same beam simultaneously, a NOMA transceiver is proposed in this paper. For the NOMA transmitter, Gray-coded QAM constellation mapping is extended to arbitrary modulation order q. For the NOMA receiver, successive interference cancellation (SIC) is no longer necessary, and instead, a parallel demodulation is proposed. The numerical and simulation results suggest that the proposed NOMA transceiver outperforms the conventional NOMA SIC receiver and can be flexibly used for an MHN highway scenario.

• Journal of ILASS-Korea
• /
• v.21 no.3
• /
• pp.155-161
• /
• 2016

Injected fuel pressure waves of a common rail injector with various current profiles supplied to the injecor were measured using Bosch method. In order to drive the common rail injector, the current in the solenoid should be controlled using what is known as a peak and hold pattern, which consists of a high current level with a short time duration (peak) in the first step and a low current level with a long time duration (hold) in the subsequent step. The current profile can be shaped by swithcing an injector driving power source with the peak and hold waves. The capture, compare and PWM (CCP) pin in the microprocessor was used to generate the combined peak and hold waves. The PWM square wave generated from the CCP pin has a duty ratio of 100% for the peak current and 10% or 30% for the hold pattern. Five patterns of the current profile were generated by combining the peak and hold wave. The common rail pressure is controlled at 75, 100, and 130 MPa. As the fuel rail pressure increases, the variations of the measured fuel injection pressure wave according to the current profiles decrease.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.399-404
• /
• 2014

A power amplifier (PA) for a femto-cell base station should be highly efficient, linear and small. The efficiency for amplification of a high peak-to-average power ratio (PAPR) signal was improved by designing an asymmetric Doherty PA (DPA). The linearity was improved by applying third-order inter-modulation (IM3) cancellation method. A small size is achieved by designing the DPA using GaN MMIC process. The implemented 2-stage DPA delivers a power-added efficiency (PAE) of 38.6% and a gain of 33.4 dB with an average power of 34.2 dBm for a 7.2 dB PAPR 10 MHz bandwidth LTE signal at 2.14 GHz.