• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.469-471
• /
• 1999

In this paper, the method of Space-Vector Pulse Width Modulation(SVPWM) with Fuzzy Logic Regulator(FLR) is proposed. In a conventional SVPWM, the procedures of phase transformation and choosing PWM patterns are complex. So, it should be implemented with high performance processor like Digital Signal Processor(DSP). In order to reduce a calculation burden, a proposed system adopts FLR. Using a linguistic contro strategy based on expert knowledge, FLR relieves the processor from a heavy computations. In simulations, the proposed system is validated.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.203-205
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.387-390
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit Incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.326-328
• /
• 2005

In order to reduce the capital and overall operating cost of a fuel-cell system, a high-efficiency fuel-cell power inverter with a simple framework is required. The high-order two-inductance two-capacitance (LLCC) resonant technique is adopted in this study to implement a low-frequency 60-Hz sine wave voltage inverter utilized in the proton exchange membrane fuel-cell (PEMFC) system. The methodology for inverting dc voltage into low-frequency ac boltage is usually generated by the pulse-width-modulation (PWM) technique. However, the PWM-type inverter output has high-frequency harmonic components. Although an adequately designed filter could be utilized to overcome this problem, there are still some undesirable effects introduced by the high-frequency switching loss, electromagnetic-interference, harmonic current, and load variation. A novel power inverter via the LLCC resonant technique is designed for inverting dc voltage into 60-Hz ac sine wave voltage in the PEMFC system. This circuit scheme has the merits of low harmonic components, soft switching, high efficiency, and simplified implementation. The effectiveness of the proposed resonant inverter used for the PEMFC system is verified by numerical simulations and experimental results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.156-161
• /
• 2007

In a TDD system, the length of slots can be unequal, and the number of downlink (DL) and uplink (UL) slots per frame can be different as well. The advantage of using TDD is the capability to accommodate asymmetric high-bit-rate services for the DL and It, which will be one of the prominent features in 4G systems. This paper analyzes the performance of TDD system on mobile channel environments like indoor pedestrian and vehicular channel, and proposes optimum modulation/demodulation method in TDD system. A rectangular QAM (RQAM) used in various communication systems has good BER performance but the much more signal amplitudes also have become one of the barriers to implement receiver. While PSK receiver is implemented easily because it has a constant amplitude, but it's BER performance is worse than RQAM. APSK proposed in this paper integrates merits of RQAM and PSK, and minimizes demerits of then And a simple method is also proposed to demodulate the soft symbol. The results indicate that the proposed APSK has a little worse performance than RQAM but the dynamic range of APSK is about 4 dB, 8 dB better than RQAM at 16-ary, 64-ary modulation/demodulation respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.531-538
• /
• 2016

In this paper, we have proposed MIMO-IBFD system that can transmit and receive multiple data stream at the same time in the single band, and analyze the system. We have confirmed that MIMO-IBFD system requires multiple RF cancellation and multiple Digital cancellation techniques. In simulation, we have analyzed characteristic of received signal on MIMO-IBFD system, and evaluate system performance of conventional $2{\times}2$ MIMO system and MIMO-IBFD system. As simulation results, we have confirmed that MIMO-IBFD system can transmit and receive multiple data stream at the same time in the single band by using multiple RF and digital cancellation techniques. Additionally, we have confirmed that BER performance of $2{\times}2$ MIMO-IBFD system with low-level QAM modulation is similar to performance of $2{\times}2$ MIMO system, and BER performance of $2{\times}2$ MIMO-IBFD system with high-level QAM modulation is degraded in comparison with $2{\times}2$ MIMO system with high-level QAM modulation. We can confirm that MIMO-IBFD system requires high level self-interference cancellation technique in order to use high level modulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.27-31
• /
• 2006

Millimeter over Fiber (MMoF) technique modulates millimeter wave signal optically to transmit it through an optical fiber for long distances with small loss. MMoF system usually uses optical single sideband (OSSB) modulation scheme to reduce fiber chromatic dispersion and obtain high bandwidth efficiency. The optical link of MMoF system using OSSB is treated as a nonlinear amplifier, and the AM/AM characteristic function of the amplifier is a Bessel function of the first kind of order 1. In this paper, we investigate the performance of OFDM MMoF system considering nonlinearity of OSSB modulation. We estimate a power of the nonlinear distortion noise to analyze the theoretical bit error rate(BER), and perform a simulation to verify the theoretical BER.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.30-39
• /
• 2014

This paper studies a new three-level pulse-width modulation (PWM) resonant converter for high input voltage and high load current applications. In order to use high frequency power MOSFETs for high input voltage applications, a three-level DC converter with two clamped diodes and a flying capacitor is adopted in the proposed circuit. For high load current applications, the secondary sides of the proposed converter are connected in parallel to reduce the size of the magnetic core and copper windings and to decrease the current rating of the rectifier diodes. In order to share the load current and reduce the switch counts, three resonant converters with the same active switches are adopted in the proposed circuit. Two transformers with a series connection in the primary side and a parallel connection in the secondary side are adopted in each converter to balance the secondary side currents. To overcome the drawback of a wide range of switching frequencies in conventional series resonant converters, the duty cycle control is adopted in the proposed circuit to achieve zero current switching (ZCS) turn-off for the rectifier diodes and zero voltage switching (ZVS) turn-on for the active switches. Finally, experimental results are provided to verify the effectiveness of the proposed converter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.59-67
• /
• 2006

OFDM (Orthogonal frequency Division Multiplexing) systems convert serial data stream to N parallel data streams and modulate them to N orthogonal subcarriers. Thus spectrum utilization efficiency of the OFDM systems are high and high-speed data transmission is possible. However, with the OFDM systems using the same modulation method at all subcarriers, the error probability is dominated by the subcarriers which experience deep fades. Therefore, in order to enhance the performance of the system adaptive modulation is required, with which the modulation methods of the subcarriers are determined according to the estimated SNRs. The IEEE 802.11a system selects various transmission speed between 6 and 54 Mbps according to the modulation mode. There are three typical methods for SNR estimation: Direct estimation method uses the frequency domain symbols to estimate SNR directly by minimizing MSE (Mean Square Error), EVM method utilizes the distance between the demodulated constellation points and received complex values, and the method utilizing the Viterbi algorithm uses the cumulative minimum distance in decoding process to estimate the SNR indirectly. Through comparison analyses of three methods we propose a new SNR estimation method, which employs both the EVM method and the Viterbi algorithm. Finally, we perform extensive computer simulations to confirm the performance improvement of the proposed adaptive OFDM systems on the basis of IEEE 802.11a.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.111-118
• /
• 2005

In this paper, we employ the modulation technique for improving the characteristics of beamformer in the low frequencies and thus improving the overall noise reduction performance. In the 1-dimensional uniform linear microphone arrays, we can suppress the narrowband noise component using the delay-and-sum beamforming. But, for the wideband noise signal, the delay-and-sum beamformer does not work well for the reduction of low frequency component because the inter-element spacing is usually set to avoid spatial aliasing at high frequencies. Hence, the beamwidth is not uniform with respect to each frequency and it is usually wider at the low frequencies. In order to obtain the beamwidth independent of frequencies, subarray systems[1][2][3][4] and multi-beamforming[5] have been proposed. However these algorithms need large space and more microphones since they are based on the theory that the size of the array is proportional to the wavelength of the input signal. In the proposed beamformer, we reduce the low frequency noise by using modulation technique that does not need additional sensors or non-uniform spacing. More Precisely, the array signals are split into subbands, and the low frequency components are shifted to high frequencies by modulation and reduced by the delay-and-sum beamforming techniques with small size microphone array. Experimental results show that the proposed technique Provides better performance than the conventional ones, especially in the low frequency band.