• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.58-63
• /
• 2005

The estimation of springing responses for recent ships is carried out, and application to a ship design is described. To this aim, springing effects on hull girder were re-evaluated, including non-linear wave excitations and torsional vibrations of the hull. The Timoshenko beam model was used to calculate stress distribution on the hull girder, using the superposition method. The quadratic strip method was employed to calculate the hydrodynamic forces and moments on the hull. In order to remove the irregular frequencies, we adopted 'rigid lid' on the hull free surface level, and addedasymptotic interpolation along the high frequency range. Several applications were carried out on the following existing ships: The Bishop and Price's container ship, S-175 container ship, large container, VLCC, and ore carrier. One of them is compared with the ship measurement result, while another with that of the model test. The comparison between the analytical solution and the numerical solution for a homogeneous beam-type artificial ship shows good agreement. It is found that Most springing energy comesfrom high frequency waves for the ships having low natural frequency and North Atlantic route etc. Therefore, the high frequency tail of the wave spectrum should be increased by $\omega$$\^{-3}$ instead of $\omega$$\^{-4}$ or $\omega$$\^{-5}$ for the springing calculation.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.182-190
• /
• 1997

A new method to prevent reinforced concrete columns from brittle failure. The method is called transversely reinforcing method in which only the critical regions are confined in steel tube. The steel tubes can change the failure mode of the latter columns from the shear to the flexure. The steel tubes also increase the compressive strength, shear strength and deformation capacity of the infilled concrete. The following conclusions are reached on bases of the study on the seismic performance of the high-strength RC rectangualr short columns confined in steel tube with shear span tho depth ratio of 2.0 The brittle shear failure of high-strength reinforced concrete short columns with large amount of longitudinal bars, which cannot prevented by using the maximum amount of welded hoops, can be prevented by using the steel tube which confines all the maximum amount of welded hoops, can be prevented by using the steel tube which confines all the concrete inclusive of cover concrete. High-strength RC short columns confined in rectangular steel tube provided excellent enhancement of seismic performance but, found that plastic buckling of the steel tube in the hinge regions tended to occur when the columns were subjected to large cyclic lateral displacements. In order to prevent the plastic buckling when the columns lies on large on cyclic lateral displacements, the steel ribs were used for columns. Tests have established that the columns provide excellent enhancement of seismic performance of inadequately confined columns.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.16-21
• /
• 2008

In order to protect the environment from the refrigerant pollution, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be different because of $CO_2$'s unique properties as a refrigerant. Especially, the high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. High-side pressure algorithms, which were composed of the pressure setpoint algorithm and the pressure setpoint reset algorithm, were developed. Pressure setpoint algorithms, by using a neural network and by using a least square method, were developed and compared. Pressure setpoint reset algorithms, by using a fuzzy logic and by using a proportional logic, were also developed and compared. Simulation results showed that a least square method was more useful than a neural network for the pressure setpoint algorithm. And a proportional logic was more practical than a fuzzy logic for the pressure setpoint reset algorithm.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.173-178
• /
• 2004

The estimation of springing responses for recent ships are carried out and application to a ship design are described. To this aim, springing effects on hull girder were re-evaluated including non-linear wave excitations and torsional vibrations of the hull. The Timoshenko beam model was used to calculate stress distribution on the hull girder by the superposition method. The strip method was employed to calculate the hydrodynamic forces and moments on the hull. In order to remove the irregular frequencies, we adopted 'rigid lid' on the hull free surface level and added asymptotic interpolation along the high frequency range. Several applications to the existing ships were carried out. They are Bishop and Price's container ship, S-175 container ship, large container, VLCC and ore carrier. One of them is compared with ship measurement result while another with that of model test. Comparison between analytical solution and numerical one for homogeneous beam type artificial ship shows good agreement. It is found that most springing energy came from high frequency waves for the ships having low natural frequency and North Atlantic route etc. Therefore, the high frequency tail of the wave spectrum should be increased by $\omega^{-3}\;instead\;of\;\omega^{-4}\;or\;\omega^{-5}$ for springing calculation.

• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.95-100
• /
• 2019

Whilst most research focuses on the reduction of operative energy use in buildings, the aspect of which (and how many) materials are used is often neglected and poorly explored. However, considering the continuous growth of the global population and the limited availability of resources, it is clear that focusing on operative energy alone is too short-sighted. The tasks lying ahead for architects and engineers cannot be accomplished with conventional methods of construction. With a share of 50-60% of global resource consumption, the building industry has a decisive impact on our environment. If business as usual continues, resources will be significantly depleted in a matter of decades. Therefore, researchers of the University of Stuttgart are investigating the concept of adaptivity as a promising method for saving resources in the built environment. The term adaptivity in the context of building structures was first introduced by Werner Sobek. It describes a method where sensors, actuators and control units are implemented in systems or facades in order to oppose physical impacts in an ideal way. The applicability of this method will be verified on an experimental high-rise building at the University campus in Stuttgart. Thus, this paper describes this innovative research project and depicts the concept of adaptivity in high-rise structures. Furthermore, it gives an overview of potential actuation concepts and the interdisciplinary challenges behind them.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.739-745
• /
• 2011

Beta-type alloys are the most versatile class of titanium alloys. They offer the highest strength to weight ratios and very attractive combinations of strength, toughness, and fatigue resistance inlarge cross sections [1]. The present study was made to obtain useful information for the design of ${\beta}$-type titanium alloys with high-strength properties by using the $DV-X{\alpha}$ method. Employing two calculated parameters, the bond order (Bo) and the d-orbital energy level (Md) of alloying elements in ${\beta}$-type titanium alloy was introduced and used for prediction of mechanical properties. Thus, high-strength titanium alloys were designed by calculating the Md and Bo values of the previous and present titanium alloys.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.505-517
• /
• 2005

The Purposes of this study were to find complementary connectible new factors that analyzed correlation relate of Sasang Constitution and GCM Body Type in Static Posture and Dynamic Hyper/Hypo-mobility Pattern. Method of this study was asymtomatic volunteers 232(unmarried man and women), conducted from September 1 to December 31. In this main study progressing step diagnosised first, Constitution of Sasang medicine after being classified into four groups of Soyangin, Taeumin, Soeumin, Taeyangin diagnosis of GCM Body Type and progressed that related Static Posture and Dynamic Hyper/Hypo mobility Pattern. The results are as follows. Distribution of Sasang Medicine Constitution proved to be Taeyangin 13, Soyangin 66, Taeumin 67, Soeumin 86 respectively. Distribution of GCM Body Type proved I Body Type 72(31.0%), II Body Type 54(23.3%), III Body Type 89(38.4%), IV Body Type 17(7.3%). The distribution of Sasang Constitution according to GCM Body Type was that; I Body Type was distributed in the order Soeumin 34.7%(25), Taeumin 31.9%(23), Soyangin 30.6%(22), Soeumin 34.7%(25) is the most people. II Body Type was distribution of in the order Soeumin 42.6%(23), Soyangin 5.9%(14), Taeumin 24.1%(13), Soeumin 42.6%(23) is the most people. III Body Type was distribution of in the order Soeumin 37.1%(33), Taeumin 30.3%(27), Soyangin 28.1%(25), Soeumin 37.1% is the most people. IV Body Type proved high distribution each of Soeumin 29.4%(5) and Soyangin 29.4%(5). In case of main left side posture character of spine and limbs about I Body Type 72 persons with left scapular and ilium forward tilted pattern proved in the order high distribution iliac crest thigh and scapular high 70(97.2%), gluteal fold high and scapular abduction 69(95.8%), lumbar scoliosis 65(90.3%). Also, in case of right side posture character proved in the order high distribution deep gluteal fold 69(95.8%), umbilical deviation 68(94.4%). Incase of main left side posture character of spine and limbs about n Body Type 54 persons proved in the: order high distribution knee hyperextension 50(92.6%), shoulder deviation 49(90.7%) etc. Also, in case of right side posture character proved in the order high distribution pelvic deviation 53(98.1%), iliac crest thigh 52(96.3%), hip flexion and ankle inversion 51(94.4%) etc. In case of main left side posture character of spine and limbs about III Body Type 89 persons proved in the order high distribution shoulder deviation 87(97.8%), scapular abduction 86(96.6%), scapular high 85(95.5%) etc. And in case of right side posture character proved in the order high distribution pelvic deviation and iliac crest thigh 86(96.6%) etc. In case of main left side posture character of spine and limbs about IV Body Type 17 persons proved in the order high distribution pelvic deviation, lumbar sciliosis and lumbar lordosis increase 15(88.2%) etc. Also, in case of right side posture character proved in the order high distribution wrist dorsiflexion 16(94.1%), thickened achilles tendon etc.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.1
• /
• pp.25-30
• /
• 2012

Desirability approaches have been proposed to find an optimum of multiple response problem. The existing desirability approaches use either of mean or min of individual desirability in aggregation of multiple responses. However, in order to find an optimum having high mean and low dispersion among individual desirability, the dispersion needs to be simultaneously considered with its mean. This study proposes bias and variance (BV) method which aggregates bias (ideal target-mean) and variance of individual desirability in multiple response optimization. The proposed BV method was applied to an example to evaluate its usefulness by comparing with existing methods. Evaluation results showed that the solution of BV method was a fairly good compared with DS (Derringer and Suich, 1980) and KL (Kim and Lin, 2000) methods. The BV method can be utilized to multiple response surface problems when decision makers want to find an optimum having high mean and low variance among responses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.317-323
• /
• 2006

The conventional Wheeler cap method can extract the reliable efficiency of the antenna when the antenna operates as a simple series or parallel RLC circuit model. This method, however, may give an unreliable efficiency when the antenna under test has a complicated operating principle. In this paper, we revisit the conventional Wheeler cap method and propose a modified Wheeler cap method basedon the high-order circuit model. The proposed method can provide an accurate efficiency even for the antenna with a more complicated operating principle. Then we calculate efficiencies of other antennas with different operating principles and compare the results with the simulations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.3
• /
• pp.249-254
• /
• 2004

The hydro-acoustic method is widely used for estimating biomass and distribution of fisheries resources along the coast and in the ocean. High costs and time are necessary to construct systems for this method and to initially educate specialists. It has been used in fisheries of advanced nations like Japan and Norway, because it is more efficient than other methods. In order to research the behavior of fish around an artificial reef using an echo sounder, volume backscattering strength (SV) and fish per cubic meter (FPCM) of darkbanded rockfish around the model artificial reef in a water tank were measured. Moreover, behavior of fish was observed in an adjacent artificial reef, which was constructed at Tongyeong marine ranching area. Following that, an acoustics survey was conducted at Mirukdo around the Tongyeong marine ranching area, in order to understand the spatial distribution and strength of fisheries resources. Very high patches of fish were found in a wide area around the artificial reef. It is thought that an approaching fish school around the artificial reef can be measured accurately by using an echo sounder of high resolution. Moreover, use of other monitoring methods like of diving or ROV simultaneous with an echo sounder is required in order to grasp the species and ecology of fish inhabiting the area around the artificial reef.