• 한국재료학회지
• /
• 제13권2호
• /
• pp.120-125
• /
• 2003

A low melting borosilicate glass frit was used as an adhesion promoter, which enables $MnWO_4$to be sintered with in a reasonable sintering temperature range ($800∼1000^{\circ}C$). The glass was evaluated for glass transition temperature ($Τ_{g}$ X) and thermal expansion coefficient($\alpha$). Mechanical property (Vickers hardness), grain growth, the comparison of lattice parameter and pore distribution of sintered $MnWO_4$ with the frit were methodically discussed. As sintering temperature increased, a typical liquid phase sintering showed the rapid grain growth and high densification of X$MnWO_4$grain, improvement of hardness (until $920^{\circ}C$) and different pore size distribution. Resistance of sintered $MnWO_4$varied from 450k$\Omega$ to 8.8M$\Omega$ under the measuring humidify ranging from 30 to 90%. Thus, the results will contribute to the application of glass frit containing sensor materials and their future use.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.152-155
• /
• 2006

Carbon nitride ($CN_X$) films were prepared by reactive RF magnetron sputtering system at various deposition conditions and the C-V characteristics of MIS(metal - insulator - semiconductor) capacitors that have the structures of Al/$CN_x$/p-Si/Al and Al/$CN_x$/$Si_3N_4$/p-Si/Al were investigated. The resistivity of carbon nitride was above $2.40{\times}10^8{\Omega}{\cdot}cm$ at room temperature. The C-V plot showed a typical capacitance-voltage characteristics of semiconductor insulating layers, while it showed hysterisis due to interface charges. Amorphous carbon nitride (a-$CN_x$) films, that have relatively high resistivity and low dielectric constant could be useful as interlayer insulator materials of VLSI(very large-scale integration) and ULSI(ultra large-scale integration).

• 보존과학연구
• /
• 통권13호
• /
• pp.96-112
• /
• 1992

We made biological investigation on the conservational environment of collections in the Ho Am museum. Annual average temperature and relative humidity outside the museum were $11. 0∼11.7^{\circ}C$ and 64.8∼74.4% respectivey. On the other hand, average annual temperature and relative humidity inside the main storage were $19.1∼20.1^{\circ}C$ and 53.0∼63.4%. We isolated fungi and classified into 8 genus 13species fungi and selected four fungi having high cellulotic activity such as Alternaria brassicae KCPRI 9202, Aspergillus niger KCPRI 9205, Aspergillusversicolor KCPRI 9206, Penicillium adametzi KCPRI 9208. These fungi were examined on the posibility of collections being damaged under current conservation al environment in the museum. KCPRI 9208 was non-tonophilic fungus and other were facutative tonophilic fungi. These showed maximal cellulotic activity of enzymeshaking culture at pH 5.0∼5.5 for 4 and 5 days. In proprtion to the period damaged, cellulase activity for paper damaged artifically with growing worse of material. As are sult cellulotic activity by fungi increased.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.702-707
• /
• 2008

Improving quality of life and wellbeing of the residential environment and increased interests and importance is growing confidentiality, insulation, high-rise due to a lack of ventilation and indoor air pollution. Several human diseases caused tremendously due to the indoor air which consists of formaldehyde, radon, pollutants such as volatile substances that is called the phenomenon of a new house syndrome. It has become a world-wide issue that the United States, Japan and several other countries of Europe are showing more interests. Furthermore, a lot of damages caused by the syndrome occurs in the new house should be resolved by somehow is urgent. Thus, this study would like to propose the measures based on the whether condition and the way of heating in korea against a new house syndrome via analysis of indoor contaminant Reduction comparison according to vary ventilation and humidity when operating bake-out on a new apartment.

• 통합자연과학논문집
• /
• 제4권4호
• /
• pp.298-310
• /
• 2011

Recently the traffics and transportation hazzards by fog are tremendously Increased. There occurred the greater traffic disaster by Dense Fog of Oct.2006. In this study frequent occurrences of advection fogs centerd over Honam Prov are investigated. Increment of transportation during the Fog period for 1996~2005(decade)are statistically analyzed with Honam Prov.'s fogs. For Honam west coast(Gunsan, Mokpo), inland of Honam(Junju, Gwangju, Suncheon), Honam south coast(Wando, Yepsu), Wind, Dew point, Diff. of air and sea temp. relative humidity are classified between 12 hours before and on time of fog with three Dimensional Analysis System(KLAPS). High frequencies of advection-radiation Fog occurrence in western Coasts except for Suncheon. The application of fog characteristics analyzed by KLAPS for denser fog over the western coast in Fall to Fog prediction and special advisory issues. The advection-radiation fog can occure favorably when the moisture index is less than $2^{\circ}C$, relative humidity is greater than 90%, but the moisture depth is under 1.5 km. In addition when the height of 925 hPa is rising, then fog occurs, but for sinking is disappearing.

• 통합자연과학논문집
• /
• 제4권4호
• /
• pp.294-297
• /
• 2011

Quality of PEDOT electrode thin film vapor phase-polymerized on 3-aminopropyltriethoxysilane (APS) self-assembled monolayer (SAM) is very crucial for making an ohmic contact between electrode and semiconductor layer of an organic transistor. In order to improve the quality of PEDOT film, the quality of APS-SAM laying underneath the film must be in the best condition. In this study, in order to improve the quality of APS-SAM, the monolayer was self-assembled on $SiO_2$ surface by a dip-coating method under strictly controlled relative humidity (< 18%RH). The quality of APS-SAM and PEDOT thin film were investigated with a contact angle analyzer, AFM, FE-SEM, and four-point probe. The investigation showed that a PEDOT film grown on the humidity-controlled SAM is very smooth and compact (sheet resistivity = 20.2 Ohm/sq) while a film grown under the uncontrolled condition is nearly amorphous and contains quite many pores (sheet resistivity = 200 Ohm/sq). Therefore, this study clearly proves that a highly improved quality of APSSAM can offer a highly conductive PEDOT electrode thin film on it.

• 한국의류산업학회지
• /
• 제3권3호
• /
• pp.265-270
• /
• 2001

Korea and Japan, neighboring two nations, have similar cultural background and complicated relations in terms of their culture and constitution. In this study, clothing microclimate and subjective sensation of Korean and Japanese subjects for Hanbok, traditional costumes of Korea, were assessed and investigated differences between them. The results of the study were as follows. For Hanbok, the temperature within clothing at the chest have significant correlations with the variables of race and elapsed time with p<0.001. At the thigh, correlations with elapsed time were significant (p<0.001). For the humidity within clothing at the chest of Hanbok, correlations with variables of race were significant (p<0.001). At the thigh, correlations with race and elapsed time were significant(p<0.001). For Hanbok, Korean group reported 'slightly warm' whereas Japanese group reported 'hot' in the thermal sensation. For the humid sensation, Korean group reported 'neutral' and Japanese group reported 'humid'. For the comfort sensation, Korean group reported 'slightly uncomfortable' and Japanese group reported 'uncomfortable'. Japanese group reported high relation with comfort sensation and humidity of microclimate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.335-338
• /
• 2010

대기 중의 수증기는 가스터빈엔진의 주요성능에 많은 영향을 끼친다. 습공기의 영향은 기온 및 기압이 높은 여름철 해면 고도, 높은 비행 마하수 그리고 낮은 엔진 회전수에서 그 영향이 더욱 두드러진다. 이러한 습공기 유입에 따른 가스터빈 엔진의 성능변화의 정도를 살펴보고자 200lbf 급 초소형 터보제트 엔진의 고공환경 성능시험을 통해 습도가 엔진성능에 미치는 영향에 대하여 알아보았다. 고공환경 엔진시험을 통해, 건공기 유입에 비해 습공기 유입 시 순추력에서 2.826% 낮게, 비연료소모율에서 1.325% 높게 측정되었다.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.539-546
• /
• 2006

The Air Quality Sensor(AQS), located near the fresh air inlet, serves to reduce the amount of pollution entering the vehicle cabin through the HVAC(heating, ventilating, and air conditioning) system by sending a signal to close the fresh air inlet door/ventilation flap when the vehicle enters a high pollution area. The sensor module which includes two independent sensing elements for responding to diesel and gasoline exhaust gases, and temperature sensor and humidity sensor was designed for intelligent AQS in automobile. With this sensor module, AVR microcontroller was designed with back propagation neural network to a powerful gas/vapor pattern recognition when the motor vehicles pass a pollution area. Momentum back propagation algorithm was used in this study instead of normal backpropagation to reduce the teaming time of neural network. The signal from neural network was modified to control the inlet of automobile and display the result or alarm the situation in this study. One chip microcontroller, ATmega 128L(ATmega Ltd., USA) was used for the control and display. And our developed system can intelligently reduce the malfunction of AQS from the dampness of air or dense fog with the backpropagation neural network and the input sensor module with four sensing elements such as reducing gas sensing element, oxidizing gas sensing element, temperature sensing element and humidity sensing element.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.547-553
• /
• 1989

본 연구에서는 작동유체로서 수증기와 거동이 유사한 습공기를 대기 흡입식 풍동을 사용하여 원호 노즐로서 팽창시키는 경우에 대하여 응축충격파가 발생하는 흐름이 측정부내에 쐐기를 설치하여 발생시킨 경사충격파에 미치는 영향에 대해 실험적으로 조사하였다.