• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.750-752
• /
• 1992

The paper presents the effects of environment on glass-cloth/epoxy composites exposed to humid air were investigated. Tests were performed at temperature 40$^{\circ}C$ and 70$^{\circ}C$ with the materials exposed to humid air at 76% and 90% relative humidity. This investigation surveyed include (a) the moisture absorption and desorption characteristics of single and multi layered composites exposed to steady and to transient ambients, and (b) the resulting changes in tensile strength, dielectric strength, tan $\delta$ and $\varepsilon_{\tau}$ and the effects of environment on these parameters were assessed.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.1 s.60
• /
• pp.82-90
• /
• 1998

A large number of studies have indicated associations between particulate air pollution and daily mortality. Daily measurements of total suspended particulates (TSP) by high volume air sampler were matched to daily death counts supplied by the National Statistics Office, Korea. All deaths, except deaths from accidents, occurred at Ulsan from 1 January 1991 to 31 December 1994 were considered in the poisson regression analysis. The multiple regression models were used to investigate a main effects of air particulate pollution controlling for $SO_2$ levels, air temperature, relative humidity, seasonal variation, and calendar year. The results indicated that the effects of TSP, $SO_2$, temperature, and relative humidity were not significantly associated with all cause mortality. It could, however, be emphasized that the size of the parameter estimate of TSP was very similar to that of previous studies. An increase in particulates of $100{\mu}g/m^3$ was associated with a 3% increase in mortality. This relationship was observed at TSP levels well below the current National Ambient Air Quality Standard of $150{\mu}g/m^3$ in Korea as well.

• Journal of Biosystems Engineering
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2009

In order to evaluate environmental comfort of tractor cabs, temperature, relative humidity and noise within the cab were taken from 31 tractors during plowing and rotovating operations. The temperature and humidity were evaluated with regard to the comfort zone of KS B ISO 14269-2 and PMV of ISO 7730. The noise was evaluated with regard to the permissible sound level of OSHA for daily exposure of 8 hours. The collected data indicated that thermal environment of the cabs was out of the comfort zone, which meant tractor operators worked under uncomfortable thermal conditions. Difference in the thermal comfort by tractor power and maker, and type of works was not found. However, 25% of the studied tractors showed PMV in a range of -0.5 to +0.5, which indicated their operators worked under the comfort criteria. PMV was improved when the cab was air-conditioned. Levels of measured cab noise were lower than the permissible criteria, and 76.7% of the studied tractors had cab noise ranged from 75 to 85 dBA. There was a tendency that high powered tractors, rotovating operations and locally-made tractors had greater cab noise levels. However, their differences were insignificant.

• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.127-135
• /
• 2018

PURPOSES : This study develops various models that can estimate the pattern of road surface temperature changes using machine learning methods. METHODS : Both a thermal mapping system and weather forecast information were employed in order to collect data for developing the models. In previous studies, the authors defined road surface temperature data as a response, while vehicular ambient temperature, air temperature, and humidity were considered as predictors. In this research, two additional factors-road type and weather forecasts-were considered for the estimation of the road surface temperature change pattern. Finally, a total of six models for estimating the pattern of road surface temperature changes were developed using the MATLAB program, which provides the classification learner as a machine learning tool. RESULTS : Model 5 was considered the most superior owing to its high accuracy. It was seen that the accuracy of the model could increase when weather forecasts (e.g., Sky Status) were applied. A comparison between Models 4 and 5 showed that the influence of humidity on road surface temperature changes is negligible. CONCLUSIONS : Even though Models 4, 5, and 6 demonstrated the same performance in terms of average absolute error (AAE), Model 5 can be considered the optimal one from the point of view of accuracy.

• Journal of Korean Society of Forest Science
• /
• v.99 no.2
• /
• pp.163-171
• /
• 2010

Forest fires have potentials to change the structure and function of forest ecosystems and significantly influence on atmosphere and biogeochemical cycles. Forest fire also affects the quality of public benefits such as carbon sequestration, soil fertility, grazing value, biodiversity, or tourism. The prediction of fire occurrence and its spread is critical to the forest managers for allocating resources and developing the forest fire danger rating system. Most of fires were human-caused fires in Korea, but meteorological factors are also big contributors to fire behaviors and its spread. Thus, meteorological factors as well as social factors were considered in the fire danger rating systems. A total of 298 forest fires occurred during the fall season from 2002 to 2006 in South Korea were considered for developing a logistic model of forest fire occurrence. The results of statistical analysis show that only effective humidity and temperature significantly affected the logistic models (p<0.05). The results of ROC curve analysis showed that the probability of randomly selected fires ranges from 0.739 to 0.876, which represent a relatively high accuracy of the developed model. These findings would be necessary for the policy makers in South Korea for the prevention of forest fires.

• Journal of Industrial Technology
• /
• v.3
• /
• pp.87-94
• /
• 1983

Heating characteristics of red pepper paste packed in report pouches of various thicknesses and their storage stability were investigated to determine the adequate processing conditions that good bacteriological safty and minimal quality changes could be obtained, when sterilized by using a steam-air system retort. A heat penetration into pouch-packed red pepper paste was carried out through by a conductive heat transfer, indicating a simple logarithmic heating curve, and the smaller thickness revealed the higher heat penetration rate, suggesting the possibility of high temperature-short time sterilization of red pepper paste. The processing conditions with Fo-value of 4.5 or higher were sufficient for keeping up bacterial safty, but based on C-value, better quality retention was obtained at pouch thickness of 15mm under the processing temperature of $120^{\circ}C$. Subsequent storage study revealed that the red pepper paste packed in 15mm and processed at $120^{\circ}C$ with Fo=4.5 could be held without any spoilage and overall acceptance change, when stored for 6 months at room temperature under the relative humidity of 70%. After 3 months storage in $38^{\circ}C$ under saturation humidity, overall acceptance of red pepper paste were judged not to be maintainable on the acceptable level, but it may be suggested that above the results could be kept up a desirable quality without any remarkable deterioration.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.241-247
• /
• 2005

A series of proton conductive inorganic-organic hybrid membranes doped with phosphoric acid ($H_3PO_4$) and/or triethylphosphate (PO(OEt)$_3$) have been prepared by sol-gel process with 3-glycidoxypropyltrimethoxysilane (GPTMS), 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS) as precursors. High proton conductivity of 3.0 ${\times}$ $10^{-3}$ S/cm with composition of 50TEOS-30GPTMS-20APTES-50$H_3PO_4$ was obtained at 120 ${^{\circ}C}$ under 50% relative humidity. Thermal stability of membrane was significantly enhanced by the presence of SiO$_2$ framework up to 250 ${^{\circ}C}$. XRD revealed that the gels are amorphous. IR spectra showed a good complexation of $H_3PO_4$ in the matrix. The conductivity under 75% relative humidity was significantly improved by addition of APTES due to the increase in concentration of defected site in hybrid matrix. The effect of PO(OEt)$_3$, humidifying time, and heat-treatment were also investigated. PO(OEt)$_3$ had no improvement on conductivity and conductivity increased with humidifying time, however, decreased with heating temperature.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.183-188
• /
• 1998

Gas sensitizations of tin oxide film were investigated by measuring the change of film resistance in various gas atmospheres such as $N_2,\; O_2,\; H_2O$. The main test sample, polycrystalline $SnO_2$ film containing small Sb as a dopant was prepared by a sputtering technique and showed a long term stability in base resistance and thus, in gas sensitivity. The adsorption of oxygen on the film surface as a type of $(O_{ads})$ at the temperature of around $300^{\circ}C$ played important roles in sensor operating mechanism. The roles were ⅰ) the increase of base resistance in ambient air, which consequently lead to high sensitivity and ⅱ) the promotion of fast recovery. The reaction of hydrogen gas with the already adsorbed $(O_{ads})$ ions was considered as a decisive sensitization mechanism of tin oxide film. However, the dissociation of hydrogen molecules on film surface, by direct donation of electron to film also took a major part in the sensitization. The effect of humidity on gas sensitization was found to be negligible at the sensor operating temperature of around $300^{\circ}C$.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.369-370
• /
• 2002

A fungus. Penicillium sp. PS-113, with high phosphate-solubilizing activities was isolated from soil and formulated to powder type in order to manufacture it as a solid powder fertilizer. First of all, in this research, we are trying to establish an optimal condition for a drying process based on the drying time, temperature and humidity by testing its viability on potato dextrose agar(PDA) media after storing at $4^{\circ}C$. As a result the number of Penicillium sp. PS-1l3 conidia, which was dried at $80^{\circ}C$ and 15% humidity, and then stored at $4^{\circ}C$, was maximally increased to 60 times more than the control. But the viability of the conidia at $100^{\circ}C$ or over was decreased suddenly in spite of the period of storage.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.37-42
• /
• 1998

Latent and sensible heat fluxes over the global oceans are estimated using SSM/I (Special Sensor Microwave Imager) and AVHRR MCSST (Advanced Very High Resolution Radiometer Multi-Channel Sea Surface Temperature). The heat fluxes are computed from SSM/I wind speeds and surface humidity, the MCSST, and NCEP Reanalysis sea level pressures and 2-m temperatures from 1996 to 1997. The diabatic conditions bulk formula (Kondo, 1975) is used to compute the heat fluxes. To validate, the derived fluxes are compared to the measurements of 3 JMA buoys. The wind speeds and surface humidity derived from SSM/I have accuracies of 1.37m/s and 1.7g/kg, respectively. The heat fluxes were estimated these factors and the standard error of the latent and sensible heat fluxes are 5.53 W/m$^2$ and 3.33 W/m$^2$. The latest El-Nino phenomenon started at the beginning of 1997 and this event was larger than any others. We compare the heat fluxes in 1997 with the fluxes in 1996 and investigate the spatial movement of meteorological factors as well as the heat fluxes associated with El-Nino appearance.