• 한국음향학회지
• /
• 제24권7호
• /
• pp.395-401
• /
• 2005

본 논문에서는 대역폭 계층 구조의 광대역 음성 부호화기를 위한 8kbps 상위 대역 부호화기를 제안한다. 광대역 입력 음성 신호는 하위 대역 신호와 상위 대역 신호로 분리되고, 하위 대역 신호는 표준 협대역 음성 부호화기로 처리하고, 상위 대역 신호는 제안하는 부호화기로 처리하는 구조를 가진다. 제안한 상위 대역 부호화기는 입력 신호를 부프레임 단위로 MLT 변환하고 MLT 계수를 크기와 부호로 분리하여 각각의 특성에 적합하도록 양자화 한다. MLT 계수 크기는 다수의 시간과 주파수 성분을 함께 가지는 밴드로 분할하고, 각 밴드 신호는 2차원 DCT 변환하여 양자화하며, 하위 대역의 에너지 정보를 이용하여 양자화 성능을 향상시킨다. MLT 계수 부호는 각각의 중요도를 판정하여 일부 부호만 선택적으로 양자화 하는 방법을 사용한다. 제안한 상위 대역 부호화기를 포함하는 19.8kbps 광대역 부호화기의 객관적 성능과 주관적 성능을 측정하였으며, 32kbps G.722.1보다 우수한 성능을 가지는 것을 확인하였다.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 춘계 학술대회 발표논문집
• /
• pp.131-134
• /
• 2006

The narrowband speech over the telephone network is lacking in the information from low-band (0-300 Hz) and high-band (3400-8000 Hz) that are found in wideband speech (0-8000 Hz). As a result, narrowband speech is characterized by the reduced intelligibility and muffled quality, and degraded speaker identification. Spectral folding is the easiest way to reconstruct the missing high-band; however, the reconstructed speech still brings the sense of band-limited characteristic because of the absence of low-band and mid-band frequency components. To compensate for the lack of the extended speech, we propose to combine the spectral folding method and GMM transformation method, which is a statistical method to reconstruct wideband speech. The reconstructed wideband speech showed that the absent frequency components was filled up with relatively low spectral mismatch. According to the subjective speech quality evaluations, the proposed method was preferred to other methods.

• 한국정보통신학회논문지
• /
• 제13권4호
• /
• pp.636-644
• /
• 2009

본 논문에서는 구형공진기와 SIOS를 사용하여 삽입손실이 작고, 차단특성이 아주 좁고, 광대역 특성을 갖는 마이크로스트립 대역통과필터를 연구하였다. 계단 입피던스 스터브는 일반$0.25{\lambda}$ 스터브 보다 약 30%의 길이를 줄일 수 있고, 또한 스터브의 임피던스의 크기를 변경할 수 있는 장점이 있음으로 필터의 특성 개선에 적용할 수 있다. 본 논문의 객관성을 입증하기 위해서 이중모드 구형공진기를 사용한 최적화된 광대역 대역통과 필터를 구현하였다. 전송선로 모델을 사용하여 계산한 주파수 특성 결과는 실험 값과 아주 잘 일치하였다. 구현된 필터의 주파수 특성은 $L_4$ = 1.94mm인 경우에 필터의 3dB 대역폭은 52.5%(3.267GHz)이고, 삽입 손실은 0.33dB, 30dB 차단특성은 저주파수 대역에서 221MHz, 고주파수대역에서 0.181MHz이다. 최대 차단특성은 저주파 대역에서 -54dB, 고주파 대역에서 -60dB이다.

• 전자공학회논문지 IE
• /
• 제46권1호
• /
• pp.1-6
• /
• 2009

본 논문에서는 광대역 주파수 합성기의 구현을 위하여 주파수 검출 범위와 락킹 시간을 개선한 디지털 PLL의 구조 및 설계에 대하여 기술한다. 제안된 구조에서는 광대역의 고속 주파수 비교기를 위하여 광역 디지털 로직 직교상관기를 사용하였고, 2 비트 업-다운 카운터 및 시그마-델타 변조기를 적용하여 디지털 제어 발진기의 주파수가 제어되도록 하였다. 따라서 양자화에 의한 잡음으로부터 추가되는 위상 잡음을 감소시킬 수 있으며, 최근의 휴대용 멀티미디어 통신 단말기 등에서 요구되는 고속의 락킹 및 광대역 지원, 그리고 저전력 현에 적합하다.

• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.39-44
• /
• 2008

In this paper, fully embedded 2.4GHz WLAN band pass filter (BPF) was investigated into a multi-layered organic packaging substrate using high Q spiral stacked inductors and high Dk MIM capacitors for low cost RF System on Package (SOP) applications. The proposed 2.4GHz WLAN BPF was designed by modifying chebyshev second order filter circuit topology. It was comprised of two parallel LC resonators for obtaining two transmission zeros. It was designed by using 2D circuit and 3D EM simulators for finding out optimal geometries and verifying their applicability. It exhibited an insertion loss of max -1.7dB and return loss of min -l7dB. The two transmission zeros were observed at 1.85 and 6.7GHz, respectively. In the low frequency band of $1.8GHz{\sim}1.9GHz$, the stop band suppression of min -23dB was achieved. In the high frequency band of $4.1GHz{\sim}5.4GHz$, the stop band suppression of min -l8dB was obtained. It was the first embedded and the smallest one of the filters formed into the organic packaging substrate. It has a size of $2.2{\times}1.8{\times}0.77mm^3$.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.665-672
• /
• 2015

We demonstrate an ultrathin metamaterial for polarization independent perfect absorption as well as a band-pass filter (BPF) which works at a higher frequency band compared to the perfect absorption band. The planar metamaterial is comprised of three layers, symmetric split ring resonators (SSRRs) at the front and structured ground plane (SGP) at the back separated by a dielectric layer. The perfect metamaterial absorber (MA) can realize near 100% absorption due to high electromagnetic losses from the electric and/or magnetic resonances within a certain frequency band. The thickness of the structure is only 1/28 of the maximum absorption wavelength.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.75-83
• /
• 2013

PURPOSES: The purpose of study is to understand the characteristic of driving noise from the front and rear tire for effective active noise cancellation application. METHODS : As literature review, noise measurement methods were reviewed. Noise measurement conducted at three kind of section by road slope using CPX(Close Proximity Method). Noise data was compared by total sound pressure level and 1/3 octave band frequency sound pressure level. Also, each section was compared by T-test using SPSS. RESULTS : In the case of the uphill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low and high frequency band. In the case of high slope section of Sangsaek-Ri, the sound pressure level of the front tire was higher than that of the rear tire in high frequency. Also, in the case of the downhill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low frequency band. However, the sound pressure levels of both the front and rear tires were approximately the same in the high slope section of Sangsaek-Ri. The result of T-test showed that total sound pressures of the front and rear tires were not different from each other in the case of high slope and high speed. CONCLUSIONS: Road slope was not an important variable for effective active noise cancellation.

• 대한전자공학회논문지TC
• /
• 제47권2호
• /
• pp.62-66
• /
• 2010

본 논문은 높은 Q 특성을 갖는 이중 H자 형태의 메타 전자파구조의 공진기를 적용한 발진기를 제안하였다. 제안된 발진기는 고성능의 주파수합성부에 적용하기 위한 것으로 저위상잡음 및 높은 출력 전력을 요구한다. 특히 이중 H자 형태의 메타 전자파구조(DHM)는 전기장의 커플링을 강하게 하여 발진 주파수에서 높은 Q 값을 갖도록 설계되었다. 이러한 특성을 통해 우수한 위상잡음 특성을 얻을 수 있다. 이중 H자 형태의 메타 전자파구조를 이용한 발진기는 레이더 시스템의 주파수 합성부에 적용하기 위한 X 대역 내 발진을 형성하였으며 출력 전력은 4.33 dBm, 위상잡음은 100 kHz 옵셋에서 -108 dBc를 얻을 수 있었다.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.49-55
• /
• 2020

In order to improve the electromagnetic shielding rate of Carbon Fiber (CF), it was produced using the nickel nano-powder impregnating method. Using two types of nickel powder having thicknesses of 50 ㎛ and 100 ㎛, and a thermoplastic elastomer resin, a compound containing 10-20% nickel content was mixed and then manufactured through an extruder. The CF coated with the compound was woven and manufactured using a 1-ply specimen. The final nickel content of the specimen was verified using TGA and the distribution of nickel powder on the CF surface was verified using SEM. The metal shows a high shielding rate in the low-frequency band, but the shielding rate decreases at higher-frequency bands. The CF improves at the higher frequency band, and metals reflect electromagnetic waves while carbon absorbs electromagnetic waves. The study of shielding materials, which are stronger and lighter than metal, by using CF lighter than metal and enabling the shielding rate from low-frequency band to high-frequency band, confirmed that the larger the area coated with nickel nano-powder, the better the electromagnetic shielding performance. In particular, CF coated with a thickness of 100 ㎛ has a shielding rate similar to that of copper and can also be used for EV/HEV automotive cables and other applications in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.219-223
• /
• 2001

In this paper, electromagnetic waves were measured in accordance with propagating the discharge when positive and negative DC high voltage was applied to needle-plane electrdes and plane-plane electrdes that solid dielectric was inserted between the electrodes. The radiated electromagnetic waves were investigated in bandwidth of VHF($30{\sim}230$[MHz]) using an biconical antenna. In needle-plane electrodes high electric field intensity is shown in both frequency band of 90(MHz) and 170[MHz], and gradually decreasing characteric is appeared at high frequency band. However high electric field intensity is shown in both 80[MHz] and 140[MHz] in case of plane-plane electrodes configuration. And over 150[MHz] frequency band, rapidly decreasing characteristic is shown. Moreover, electric field intensity of positive DC is about $5{\sim}10$[dB] higher than negative DC.