• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.515-525
• /
• 2022

The wireless power transfer (WPT) charging system for AGV depends highly on the coupling conditions due to air gap variation. To attain stable output power with high transfer efficiency under various coupling conditions, a single-stage, DC-DC converter that operates with robustness to changes in air gaps is proposed for the WPT system. The proposed converter is capable of soft switching under the set input voltage (V_in: 380 V_DC), load conditions (0-1 kW), and air gap changes (30-70 mm). In addition, a wide output voltage range (Vo: 39-54 V_DC) can be controlled by varying the link voltage due to the phase control at a fixed switching frequency. Experimental results are verified using a prototype of a 1 kW wireless power charging system.

• The KIPS Transactions:PartA
• /
• v.11A no.1
• /
• pp.49-56
• /
• 2004

The performance of the multiprocessor systems is limited by the several factors. The system performance is affected by the processor speed, memory delay, and interconnection network bandwidth/latency. By the evolution of semiconductor technology, off the shelf microprocessor speed breaks beyond GHz, and the processors can be scalable up to multiprocessor system by connecting through the interconnection networks. In this situation, the system performances are bound by the latencies and the bandwidth of the interconnection networks. SCI, Myrinet, and Gigabit Ethernet are widely adopted as a high-speed interconnection network links for the high performance cluster systems. Performance improvement of the interconnection network can be achieved by the bandwidth extension and the latency minimization. Speed up of the operation clock speed is a simple way to accomplish the bandwidth and latency betterment, while its physical distance makes the difficulties to attain the high frequency clock. Hence the system performance and scalability suffered from the interconnection network limitation. Duplicating the link of the interconnection network is one of the solutions to resolve the bottleneck of the scalable systems. Dual-ring SCI link structure is an example of the interconnection network improvement. In this paper, I propose a network topology and a transaction path algorism, which optimize the latency and the efficiency under the duplicated links. By the simulation results, the proposed structure shows 1.05 to 1.11 times better latency, and exhibits 1.42 to 2.1 times faster execution compared to the dual ring systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.851-856
• /
• 2013

Recently, as the tactical environment has changedto one of network-centric warfare, where all components are connected through a network, much emphasis has been placed on the use of an artificial satellite for achieving high communication speeds. To provide a high-quality artificial satellite link, stabilization is very important in a platform. Previous stabilization control techniques used PI control, which is commonly used for vessels. However, for ground terminals that require a higher communication speed, the antenna should move faster to track an artificial satellite within a short period of time. Moreover, the terminals must be equipped with proper sensors and algorithms so that they can detect and compensate for external disturbances while tracking the artificial satellite. In this study, through the analysis of the dynamic model of an antenna system, a stabilization algorithm for ground terminals was proposed;this algorithm shows high isolation performance in the low-frequency range and includes $PI^2$ control.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.859-865
• /
• 2007

This paper presents a method to analyze the unbalance response of a high speed polygon mirror scanner motor supported by sintered bearing and flexible supporting structures by using the finite element method and the mode superposition method. The appropriate finite element equations for polygon mirror are described by rotating annular sector element using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. The rotating components except for the polygon mirror are modeled by Timoshenko beam element including the gyroscopic effect. The flexible supporting structures are modeled by using a 4-node tetrahedron element and 4-node shell element with rotational degrees of freedom. Finite element equations of each component of the polygon mirror scanner motor and the flexible supporting structures are consistently derived by satisfying the geometric compatibility in the internal boundary between each component. The rigid link constraints are also imposed at the interface area between sleeve and sintered bearing to describe the physical motion at this interface. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem by using the restarted Arnoldi iteration method. Unbalance responses in time and frequency domain are performed by superposing the eigenvalues and eigenvectors from the free vibration analysis. The validity of the proposed method is verified by comparing the simulated unbalance response with the experimental results. This research also shows that the flexibility of supporting structures plays an important role in determining the unbalance response of the polygon mirror scanner motor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6B
• /
• pp.508-516
• /
• 2006

The explosive growth of wireless network users and the existence of various wireless services have demanded high rate throughput as well as user's QoS guarantees. Towards this, this paper proposes QoS-oriented subcarrier allocation scheme considering the QoS provisioning of multiple users, which is major requirement for wireless network design point of view. This paper introduces joint RR/K&H combined with M-LWDF(Modified Largest Weighted Delay First) scheme throughout observing statistical channel behavior and real time queuing analysis for appropriate resource allocation tightly connected to multiuser scheduling. Accordingly, the system throughput can be enhanced, and the QoS demanded for delay sensitive services can be satisfied. Furthermore, the proposed scheme is applied for OFDMA(Orthogonal Frequency Division Multiple Access) systems to allocate sub-carriers in optimal way. The simulation results verify plausible performances of proposed resource allocation scheme via showing superior effective capacity under time-varying physical-layer channel behaviors.

• Computers and Concrete
• /
• v.16 no.4
• /
• pp.503-529
• /
• 2015

Traditionally, multi-story buildings are designed to provide stiffer structural support to withstand lateral earthquake loading. Introducing flexible elements at the base of a structure and providing sufficient damping is an alternative way to mitigate seismic hazards. These features can be achieved with a device known as an isolator. This paper covers the design of base isolators for multi-story buildings in medium-risk seismicity regions and evaluates the structural responses of such isolators. The well-known tower building for police personnel built in Dhaka, Bangladesh by the Public Works Department (PWD) has been used as a case study to justify the viability of incorporating base isolators. The objective of this research was to establish a simplified model of the building that can be effectively used for dynamic analysis, to evaluate the structural status, and to suggest an alternative option to handle the lateral seismic load. A finite element model was incorporated to understand the structural responses. Rubber-steel bearing (RSB) isolators such as Lead rubber bearing (LRB) and high damping rubber bearing (HDRB) were used in the model to insert an isolator link element in the structural base. The nonlinearities of rubber-steel bearings were considered in detail. Linear static, linear dynamic, and nonlinear dynamic analyses were performed for both fixed-based (FB) and base isolated (BI) buildings considering the earthquake accelerograms, histories, and response spectra of the geological sites. Both the time-domain and frequency-domain approaches were used for dynamic solutions. The results indicated that for existing multi-story buildings, RSB diminishes the muscular amount of structural response compared to conventional non-isolated structures. The device also allows for higher horizontal displacement and greater structural flexibility. The suggested isolation technique is able to mitigate the structural hazard under even strong earthquake vulnerability.

• Journal of Convergence for Information Technology
• /
• v.9 no.3
• /
• pp.68-74
• /
• 2019

The purpose of this study was to identify research trends of 892 domestic articles (2009-2018) related to emotional labor by using text-mining and network analysis. To this end, the keyword of these papers were collected and coded and eventually converted to 871 nodes and 2625 links for network text analysis. First, network text analysis revealed that the top four main keyword, according to co-occurrence frequency, were burnout, turnover intention, job stress, and job satisfaction in order and that the frequency and the top four core keyword by degree centrality were all relatively the high. Second, based on the top four core keyword of degree centrality the ego network analysis was conducted and the keyword for connection centroid of each network were presented.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• The Journal of Korean Society for School & Community Health Education
• /
• v.2 no.2
• /
• pp.89-99
• /
• 2001

This paper is based on the assumption that the sexual awareness and sexual behaviour of high school students would show the difference between an academic high school and a vocational high school. The main purpose of this paper is to provide basic information on establishing the direction of a realistic and efficient education, which leads to the desirable sex ethics eventually. To do this, a comparative study was carried out to figure out the difference between academic high school students and vocational high school students in terms of their actual awareness and behaviour of sex. I put the following two questions in order to achieve the goal of this study. First, what is the difference in sexual awareness between academic high school students and vocational high school students? Second, what is the difference in sexual behaviour between academic high school students and vocational high school students? The subjects of the survey conducted were 595 high school students in Kyunggi Province and I made the questionnaires referencing pre-studies. The SPSS program was used to get a frequency and a percentage from the results of the survey and then, by applying t-text, $x^2$ verification and interrelation, the following results were obtained. First, regarding sexual awareness, there wasn't much difference in their idea of keeping virginity before marriage between academic high school students and vocational high school students. From the results obtained by analyzing the interrelation between students and their parents and friends in terms of a will to keep virginity, it is found that there was a relevance in both academic high school and vocational high school. When they have a sex problem, it was friends that they are looking for consulting and both groups showed thesame result. But pertaining to an experience of a sex education, the comparative analysis indicated an meaningful difference. Second, as for sex behaviour, it was shown that there was a difference in the experience of going out with the other sex between academic high school students and vocational high school students as well as in the degree of physical touch. However, not much difference was shown in controlling a sex desire between the two groups. As a results of the comparative analysis of the sex experience between the two groups, there was a meaningful difference. In terms of the object of their sex experience, the majority of students in the two groups chose a friend as their first answer and there was little difference. From these results I can draw some conclusions that most of the students in both groups have a link with friends and parents in keeping their virginity. Furthermore, a meaningful difference in experiencing a sex education is presented between the two groups. With regard to the sex behaviour of high school students, a meaningful difference is shown in dating the other sex, a physical touch and a sex experience between the two groups. Consequently, we realize that there is a meaningful difference in some variants on the sexual awareness and sexual behaviour of high school students between academic high school and vocational high school.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.565-575
• /
• 2021

The purpose of this study was to identify the amount of alcohol and drinking frequency among high school students based on social alcohol drinking supply. The data was on 161 drinkers aged between 16 and 19 from 21 high schools across the country using a questionnaire of the International Alcohol Control(IAC) Study, which was developed in 2012. Results show that the higher the number of social suppliers offering alcoholic beverages to high school students, the greater the consumption of alcohol per episode(59.433 g for one person, 113.40 g for two, and 133.56 g for three or more people). On the other hand, alcohol consumption among 'Honsul' people, a group that drinks alone without a social drinking supplier, was 167.84 grams, higher than that of groups that receive social drinking services. As a social drinking supplier for teenagers, drinking was the highest by their father (29.3 %), while friends (25.0 %) and mothers (20.7 %) were the main drinking suppliers. In particular, the provision of drinking due to father(𝛽=-.32, t=3.55, p<.01) and mother(𝛽=.22, t=2.71, p<.01) showed statistical significance as a factor in increasing the frequency of providing social drinking in adolescents. On the other hand, partner/boy or girl friend (𝛽=-.23, t=-2.73, p<.01) was a factor in reducing the frequency of alcohol provision. Friends(𝛽=.24, t=3.02, p<.01) and senior-junior schoolmates(𝛽=.16, t=2.04, p<.05) were the factors that increase the total alcohol intake of adolescents. This is due to the increase in the frequency of alcohol provision. This suggests that alcohol harm education should be expanded from students to parents, considering the role of parents as a social drinking supplier and the link between high alcohol intake among teenagers due to senior-junior friends and schoolmates.