• 한국화재소방학회논문지
• /
• 제22권5호
• /
• pp.83-89
• /
• 2008

ISO 7203-2의 고팽창포 표준 발포기를 이용하여 포수용액을 5기압에서 6리터로 방사하면서 풍량, 스크린 매쉬, 포수용액의 농도 및 소금물의 농도 등 외적 요인에 의한 발포 특성을 살펴보았다. 연구결과 풍량이 증가할수록 발포배율이 증가하는 경향을 보였으며 표준발포용 스크린이 평직 철망에 비해 발포배율이 높았다. 포수용액의 농도 증가에 따라 발포 배율과 환원시간이 긴 안정성이 좋은 포를 발생하였으며 소금물의 농도가 증가하는 경우는 발포 배율과 환원시간 모두 감소하는 경향을 나타내었다.

• 한국안전학회지
• /
• 제25권4호
• /
• pp.25-29
• /
• 2010

Foam concentrate is used for fire-extinguishing purposes, occurring foam, mixed with air. In huge oil-fire or the efficiency of fire-extinguishing with small quantity of water, Foam concentrate is used widely. However, perfluorooc tanoicsulfonate and nonylpenol that are included in Foam concentrate could be exposure in danger while they were discharged. The purpose of the research is the development of environment-friendly high expansion foam that exclude the dangerous substances and improvement of danger of the existing foam concentrate. The developed foam is analyzed as the environment-friendly foam in indexes of the environment-toxicity, the biodegradation appraisal, and the dangerous substances-detecting. In addition, the performances of expansion rate, discharge rate, and fire-extinguishing are suitable in the domestic regulation, so it is useful for fire-extinguishing in real fire situation.

• 한국재난정보학회 논문집
• /
• 제15권3호
• /
• pp.402-408
• /
• 2019

연구목적 : 포소화설비에 사용되는 중발포 소화약제는 기류에 영향이 적어 방출거리를 유지 할 수 있을뿐만 아니라 소화약제도 효율적으로 사용 할 수 있기 때문에 중발포기를 이용하여 발포배율 및 소화성능을 실험으로 밝히고자 한다. 연구방법 : 본 연구를 위해 중발포 시험장치를 제작하여, 합성계면활성 제포를 대상으 로 유류화재(B급) 소화성능 및 발포배율 분석과 포소화약제 소모량을 측정하고 분석하였다. 연구결과: 중발포기로 발포배율을 측정한 결과 팽창율이 26.1배의 중발포 배율로 나타났으며, 유류화재 20단위 소화모형 실험결과 소화시간이 고발포 및 저발포 보다 빠르게 나타나, 수동식설비인 호스릴 또는 중발포기 적용이 가능할 것으로 본다. 결론: 본 연구를 통해 중발포 포소화약제 발포성능 및 소화성능이 우수하게 나타나는 점을 고려하여 중발포 소화약제를 활용한 호스릴 또는 중발포기의 기술기준 도입이 필요하다.

• 대한가정학회지
• /
• 제28권2호
• /
• pp.37-45
• /
• 1990

The purpose of this study was to determine the foaming properties of two small red bean protein isolates at various conditions. Data concerning the effects of pH, temperature, MaCl concentration, sugar concentration and protein concentration on the properties such as solubility, foam expansion, foam stability were presented. The results were summarized as follows : 1. The crude protein contents of two small red beans were 26.14% and 22.71%. The percentage of nonpolar amino acid group was the highest and that of sulfur containing amino acid group was the lowest. 2. Protein solubility showed the minimum at pH 4.5 which is isoelectric point of small red bean protein isolate adn heat treatment lowered solubility(P<0.05). At pH 4.5, solubility increased sighificantly as 0.4M NaCl was added. However, the effect of sugar concentration in the solubility was not significant. 3. Foam expansion of two small red bean protein isolates was high at pH 4.5 and heat treatment at 10$0^{\circ}C$ lowered foam expansion(P<0.05). While addition of NaCl, sugar did not affect the foma expansion, gradual increment of the protein isolates concentration up to 9% decreased the foma expansion slightly. 4. Foam stability was significantly high at pH 4.5 and heat treatment at 10$0^{\circ}C$ lowered foam stability. Addition of sugar caused slight decrease in foam stability. From 1% to 9% suspension, foma stability increased significantly as protein concentration increased(P<0.05)

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.47-53
• /
• 2018

Sn-based lithium-ion batteries have low cost and high theoretical specific capacity. However, one of major problem is the capacity fading caused by volume expansion during lithiation/delithiation. In this study, 3-dimensional foam structure of Cu-Sn alloy is prepared by co-electrodeposition including large free space to accommodate the volume expansion of Sn. The Cu-Sn foam structure exhibits highly porous and numerous small grains. The result of EDX mapping and XPS spectrum analysis confirm that Cu-Sn foam consists of $SnO_2$ with a small quantity of CuO. The Cu-Sn foam structure electrode shows high reversible redox peaks in cyclic voltammograms. The galvanostatic cell cycling performances show that Cu-Sn foam electrode has high specific capacity of 687 mAh/g at a current rate of 50 mA/g. Through SEM observation after the charge/discharge processes, the morphology of Cu-Sn foam structure is mostly maintained despite large volume expansion during the repeated lithiation/delithiation reactions.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.574-579
• /
• 2005

• Computers and Concrete
• /
• 제33권4호
• /
• pp.471-479
• /
• 2024

In urban areas, appropriate backfilling design is necessary to prevent surface subsidence and subsurface cavities after excavation. Expandable foam grout (EFG), a mixture of cement, water, and an admixture, can be used for cavity filling because of its high flowability and volume expansion. EFG volume expansion induces a porous structure that can be quantified by the entrapped air content. This study observed the unit weight variations in the EFG before and after expansion depending on the various admixture-cement and water-cement ratios. Subsequently, the air content before and after expansion and the gravimetric expansion ratios were estimated from the measured unit weights. The air content before expansion linearly increased with an increase in the admixture-cement ratio, resulting in a decrease in the unit weight. The air content after the expansion and the expansion ratio increased nonlinearly, and the curves stabilized at a relatively high admixture-cement ratio. In particular, a reduced water-cement ratio limits the air content generation and expansion ratio, primarily because of the short setting time, even at a high admixture-cement ratio. Based on the results, the relationship between the maximum expansion ratio of EFG and the mixture ingredients (water-cement and admixture-cement ratios) was introduced.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.126-127
• /
• 2005

This paper provides information on the current issues and the progress of on-going researches relating onboard fixed fire extinguishing system in the IMO Sub-committee on Fire Protection. And also prepares to introduce the recent amendment to regulations and technical trends of the water mist fire extinguishing system and high expansion foam system.

• 한국화재소방학회논문지
• /
• 제24권6호
• /
• pp.139-144
• /
• 2010

기계포소화약제는 다량의 물에 포소화약제 원액을 녹인 포수용액을 발포기에 의하여 기계적인 수단으로 공기와 혼합 교반하여 거품을 발생시키는 약제를 말한다. 다양한 설비(이동식, 고정자동식) 적용성, 대형의 유류화재 적합, 대량.연속 생산이 가능한 약제의 특수성 및 장기보관이 가능한 특징이 있어 이에 대한 개발 및 연구가 꾸준히 진행되고 있다. 그러나 이러한 포소화약제는 주변의 온도 및 운용조건에 따라 발포력의 변화가 큰 특징이 있어 실제 겨울철 소방 활동시에는 사용을 자제하고 있다. 본 연구에서는 소화활동시 온도가 발포력에 미치는 영향을 분석하고 이를 활용하여 소방차에 적용 가능한 시스템을 개발하였다. 결과로 기준 약제 혼합비인 3.0%일 경우 온도차에 따라 최대 30.08%의 발포성능차가 발생하는 것으로 분석되었다. 또한 자동 혼합 시스템의 적용성을 분석한 결과 설계값과 실제실험값의 오차가 최대 0.012%로 나타남에 따라 해당 시스템의 적용성이 확보된 것으로 판단되었다.

• 한국식품조리과학회지
• /
• 제6권3호통권12호
• /
• pp.9-15
• /
• 1990

Peanut prptein isolate was tested for the purpose of finding out the effect of pH, Sodium Chloride concentration and heat treatment on the solubility, surface hydrophobicity, foam expansion and foam stability. The solubility of peanut protein isolate was affected by pH and showed the lowest value at pH 4.5. When the peanut protein isolate was heated, the solubility decreased at pH 3 and pH 7 but at pH 9 solubility increased. At all pH range, solubility decreased as NaCl was added. The surface hydrophobicity of peanut protein isolate showed the highest value at pH 1.5. Generally, at acidic pH range the surface hydrophobicity was high, but at alkaline region, the surface hydrophobicity increased as the temperature increased. And when NaCl was added, the surface hydrophobicity was also increased. Foam expansion of peanut protein isolate was no significant difference among the values about pH. When the peanut protein was heated and NaCl was added, foam expansion was increased at pH 7. Foam stability was significantly low at pH 4.5 and foam stability was increased at acidic pH region below pH 4.5. At pH 7 and pH 9, heat treatment above $60^{\circ}C$ increased foam stability. When NaCl was added, foam stability was significantly increased at pH 3 and pH 7.