• 한국수소및신에너지학회논문집
• /
• 제16권3호
• /
• pp.209-218
• /
• 2005

To find a suitable metal component in oxygen carrier particles for chemical-looping hydrogen generation system(CLH), oxygen transfer capacities of metal components were compared and Ni has been selected as the best metal component. The proper operating conditions to achieve high hydrogen generation rate have been investigated based on the chemical-equilibrium composition analysis for water splitting reactor. Moreover, suitable compositions of syngas from gasifier of heavy residue to achieve high energy efficiency have been investigated by calculation of heat of reaction. Based on the selected operating conditions, the best configuration of two interconnected fluidized beds system for the chemical-looping hydrogen generator has been investigated as well.

• 한국태양에너지학회 논문집
• /
• 제32권spc3호
• /
• pp.207-212
• /
• 2012

It is important to produce the high-temperature and high-pressure air for the concentrated solar power system using the combined cycle. In this paper, we designed two types of tubular receivers to heat up the compressed air and provided their preliminary experimental results for performance evaluation and further improvements. The developed receivers are in a square cavity shape surrounded by flow conduits for easy scale-up and radiation loss reduction. The two receivers were tested with 5 bar air in the KIER solar furnace and evaluated in terms of the outlet temperature and the efficiency.

• 전자공학회논문지D
• /
• 제34D권7호
• /
• pp.37-44
• /
• 1997

A dadaptive refinement tetrahedron mesh has been presented for using in full band GaAs monte carlo simulation. A uniform tetrahedron mesh is used without regard to energy values and energy variety in case of the past full band simulation. For the uniform tetrahedron mesh, a fine tetrahedron is demanded for keeping up accuracy of calculation in the low energy region such as .GAMMA.-valley, but calculation time is vast due to usin gthe same tetrahedron in the high energy region. The mesh of this study, thererfore, is consisted of the fine mesh in the low energy and large variable energy region and rough mesh n the high energy. The density of states (DOS) calculated with this mesh is compared with the one of the uniform mesh. The DOS of this mesh is improved th efive times or so in root mean square error and the ten times in the correlation coefficient than the one of a uniform mesh. This refinement mesh, therefore, can be used a sthe basic mesh for the full band GaAs monte carlo simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1613-1616
• /
• 2008

A Transcutaneous Energy Transmission System (TET) has been developed for the wireless energy transmission with two magnetically coupled coils. A resonance circuit is used to raise the induced voltage and current of the secondary coil. Its resonance frequency depends on the internal resistance of circuit and the transferred energy. Because the transferred energy usually changes in wide range, the output voltage is unstable and the energy transferring efficiency decrease. A push-pull class E amplifier is usedto generate high frequency AC voltage. To maintain proper resonance frequency, the voltage output of the amplifier was continuously monitored and adjusted to the optimized resonance frequency. Because of its high frequency (370 kHz), a phase lockedloop circuit and a comparator are used to monitor the output waveform. The results of experimentaldata show that the PLL circuit can increase the transmission efficiency and stabilize the output voltage of TET.

• 한국농공학회논문집
• /
• 제46권3호
• /
• pp.85-92
• /
• 2004

Biomass is considered to be a major potential fuel and renewable resource for the future. In fact, there is high potential to produce significant amount of energy from biomass around the world. In spite of the potential, there are a few efforts in biomass utilization in this nation. In this study, elemental biomass data was obtained with respect to the amount and calorific values of agricultural residues. Rice straw and husks were not included in the evaluation due to their demand from alternative uses such as livestock feedings, bedding materials, and so forth. Dry basis high calorific values are about 4,500 kcal/kg for all the agricultural residues investigated, similar to literature data. Energy densities or unit area energy value, from pepper and sesame were significant and comparable to those of woody biomass. These elemental data for biomass resources will Provide the background of Planning and development of biomass energy Program, which is getting more feasible along with advances in energy conversion technologies such as micro gas turbines.

• Asian Journal of Innovation and Policy
• /
• 제12권1호
• /
• pp.101-130
• /
• 2023

The increasing cost, and demand for, household energy has increased attention to the phenomena of energy burdens. Despite this increased attention, a lack of consensus remains in pinpointing the strongest predictors, and geographic differences, that exist within the energy ecosystem. This study addresses this gap by utilizing a series of dummy variable regressions across cities, suburbs, and rural areas within Erie County, New York-a county noted to have particularly high energy burdens. Specifically, three types of predictor sets were incorporated into the methodology: a set of socioeconomic variables, physical variables, and a combination of both variable sets. The results of this study suggest that cities tend to have the highest electricity burdens. Despite the aging infrastructure in Erie County, high energy burdens were driven primarily by socioeconomic factors such as housing cost burden and poverty status. Lastly, this study explores various planning and policy implications Erie County can utilize to reduce energy burdens. In turn, this study highlights the importance of focusing policy efforts on existing social service programs to provide support to the region's neediest households.

• Journal of Animal Science and Technology
• /
• 제65권5호
• /
• pp.989-1001
• /
• 2023

The study evaluated the effects of dietary fiber and energy levels administered during two growing periods (d 0-28 and d 29-56) for pigs exposed to a high temperature. A total of 96 growing pigs were used in six treatments as: Two treatments in thermoneutral temperature (21℃-24℃) with dietary energy of 3,300 and the inclusion of high or low fiber, two treatments in heat stress (30℃-34℃) with dietary energy of 3,300 and the inclusion of high or low fiber, and two treatments in heat stress with dietary energy of 3,450 and the inclusion of high or low fiber. Among standard energy level treatments, heat-stressed pigs showed lower average daily gain (ADG), feed intake, digestibility of dry matter, gross energy, crude protein, and crude fiber in phases 1 and 2. Moreover, higher concentrations of acetate, propionate, butyrate, and total short-chain fatty acid (SCFA) in feces were shown in pigs fed high fiber diets. There was a negative interaction between dietary fiber and energy for the fecal concentration of isobutyrate in phase 1 and valerate in phase 2. Pigs in heat stress treatments showed a higher rectal temperature, respiratory rate, hair cortisol, plasma zonulin, and fecal lipocalin-2. Among heat stress treatments, the overall ADG was increased in pigs fed high fiber. Pigs fed high dietary fiber showed a greater concentration of acetate, propionate, butyrate, and total SCFA. High fiber treatments decreased plasma zonulin. In conclusion, the inclusion of beet pulp, soluble fiber, at the level of 4% looks necessary in pigs diet during heat stress.

• 멤브레인
• /
• 제26권5호
• /
• pp.381-390
• /
• 2016

본 연구에서는 고순도의 모데나이트(Mordenite) 입자를 합성하기 위하여 천연 제올라이트를 시드로 사용하여 시드의 농도 및 수열합성 시간에 따른 천연 제올라이트 시드가 합성에 미치는 영향을 고찰하였다. 그 결과 시드가 입자의 형성에 큰 영향을 끼치는 것을 확인할 수 있었고 시드를 3 g/100 g batch 주입하여 $140^{\circ}C$에서 72시간 동안 수열합성을 진행하였을 때 $1-2{\mu}m$ 사이즈의 고순도 모데나이트 입자를 합성할 수 있었다. 이를 통해 모데나이트 입자의 성장 기구를 규명할 수 있었으며, 모데나이트 입자 형성에 있어 시드는 첫째, 구형 모데나이트 전구체 형성 자리 공급의 역할과, 둘째 모데나이트 원료 물질 소스 역할을 한다는 것을 알 수 있었다. 합성된 모데나이트 입자의 가스 흡착량 분석 결과 $CO_2$ 기체의 흡착량이 97.19 mg/g로 다른 가스들에 비해 비교적 높은 흡착성능을 보였으며, $CO_2/H_2$의 선택도가 가장 우수한 것으로 나타났다. 따라서 이러한 결과들을 바탕으로 용도에 맞는 고순도 상의 모데나이트 입자를 합성할 수 있음을 확인하였고 보다 낮은 가격으로 우수한 분리성능을 갖는 분리막 소재개발에 활용할 수 있을 것이라 판단된다.

• 대기
• /
• 제27권3호
• /
• pp.331-344
• /
• 2017

Solar energy is calculated using high-resolution digital elevation model (DEM). In focus on Seoul metropolitan area, correction coefficients of direct and diffuse solar energy with the topographic effect are calculated from DEM with 1720, 900, 450, 90 and 30 spatial resolutions ($m{\times}m$), respectively. The solar energy on the real surface with high-resolution is corrected using by the correction coefficients with topographic effect from the solar energy on horizontal surface with lower resolution. Consequently, the solar energy on the real surface is more detailed distribution than those of horizontal surface. In particular, the topographic effect in the winter is larger than summer because of larger solar zenith angle in winter. In Seoul metropolitan area, the monthly mean topographic effects are more than 200% in winter and within 40% in summer. And annual topographic effects are negative role with more than -60% and positive role with below 40%, respectively. As a result, topographic effect on real surface is not a negligible factor when calculating and analyzing solar energy using regional and global models.

• KIEAE Journal
• /
• 제14권2호
• /
• pp.37-46
• /
• 2014

University buildings are energy-guzzling facility that consume more than 10,000TOE within a campus annually. Even the consumption is on an upswing trend. Behind such high consumption are there cheap power rates for education facility, lack of high-efficiency equipment and ever-increasing use of various information equipment. Being keenly aware that greenhouse gas emission increases due to such rise of energy consumption, the present study carried out a case study. In the case study, the study chose the buildings of E university from top 10 universities that consume energy most in Seoul and examined the current status of their energy consumption and greenhouse gas emission. And then it set the reduction target of greenhouse gas by year. Putting aside a middle and long-termed strategy for later endeavor, it first established the 1st year's implementation plan (2014) for energy saving and greenhouse gas reduction with limited budget and according to greenhouse gas reduction target. The plan is specified as follows. Targets for energy saving are mainly divided into two sectors: machine equipment and electric equipment. 7 ideas were proposed. Three ideas to improve machine equipment are to replace with high-efficiency boilers and chillers and to adjust the position of the cooling tower. By doing so, it was estimated that energy could be saved by 176.34TOE in total and greenhouse gas could be reduced by 370.771t$CO_2$-eq. Four ideas to improve electric equipment include the replacement with LED lights, LED emergency lights and high-efficiency motors and the installation of motion sensors. It was calculated that such replacement could conserve 1,076.08TOE (electric energy) and reduce 2,181.420t$CO_2$-eq (greenhouse gas).