• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.169-179
• /
• 2023

Filtered containment system is a passive safety system that controls the over-pressurization of containment in case of a design-based accidents by venting high pressure gaseous mixture, consisting of air, steam and radioactive particulate and gases like iodine, via a scrubbing system. An indigenous lab scale facility was developed for research on iodine removal by venturi scrubber by simulating the accidental scenario. A mixture of 0.2 % sodium thiosulphate and 0.5 % sodium hydroxide, was used in scrubbing column. A modified mathematical model was presented for iodine removal in venturi scrubber. Improvement in model was made by addition of important parameters like jet penetration length, bubble rise velocity and gas holdup which were not considered previously. Experiments were performed by varying hydrodynamic parameters like liquid level height and gas flow rates to see their effect on removal efficiency of iodine. Gas holdup was also measured for various liquid level heights and gas flowrates. Removal efficiency increased with increase in liquid level height and gas flowrate up to an optimum point beyond that efficiency was decreased. Experimental results of removal efficiency were compared with the predicted results, and they were found to be in good agreement. Maximum removal efficiency of 99.8% was obtained.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.1
• /
• pp.28-34
• /
• 2015

Several parallelization methods that can be applied to High Efficiency Video Coding (HEVC) decoders are evaluated. The market requirements of high-resolution videos, such as Full HD and UHD, have been increasing. To satisfy the market requirements, several parallelization methods for HEVC decoders have been studied. Understanding these parallelization methods and objective comparisons of these methods are crucial to the real-time decoding of high-resolution videos. This paper introduces the parallelization methods that can be used in HEVC decoders and evaluates the parallelization methods comparatively. The experimental results show that the average speed-up factors of tile-level parallelism, wavefront parallel processing (WPP), frame-level parallelism, and 2D-wavefront parallelism are observed up to 4.59, 4.00, 2.20, and 3.16, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.509-512
• /
• 2001

Recently, our country's piggery has been becoming large-sized and crowded gradually in scale. Thus, the environment in a piggery is getting worse, which leads to a drop in livestock's immunoactivity. Therefore, livestocks are exposured to many diseases(stress, hypertension, stomach ulcer etc.). In this paper, our intention is to design a low cost ozone-generating device with high capacity to maintain a reasonable ozone level, that is necessary for cleaning the environment in a piggery, but is not too high to cause any harmful influence to human beings and livestock. The results showed that the UV-lamp tube with baffle has an increase of 25% in ozone generation efficiency compared to without baffle and the short retention time of air or high inlet air rate shows high level of ozone.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.188-189
• /
• 2007

Conventional active-clamp forward converter shows good performance in low power applications, however it suffers from a high voltage stress of switch and is not suitable for high input voltage applications. To solve this problem, a new multi-level active-clamp forward converter is proposed in this paper. Utilizing low rating switches, the proposed converter features high efficiency and low cost promising for high input voltage applications.

• International Journal of High-Rise Buildings
• /
• v.5 no.3
• /
• pp.221-232
• /
• 2016

With the booming of construction and property industries in China, the demand for high-rises and mega-scale buildings with more integrated building functions, open- and tailor-shaped outlooks, better connections to municipal infrastructures, and higher grades of building importance has been increasing in the past two decades. The seismic design and engineering of such modern mega-buildings face engineering challenges such as hazard mitigation of extreme actions and surroundings, integrated structural frameworks and building skins, complex connections, and overall construction efficiency. It is the work of a new generation of civil and structural engineers to enhance engineering efficiency and achieve overall engineering, environmental, and economical effectiveness for these high-rise projects. This paper elaborates the above topics through case studies on the design and construction of four such developments in China. Some rethinking is conducted on evolution in modern seismic engineering and design through innovation to achieve an acceptable level of overall sustainability and building effectiveness.

• Asian Journal of Turfgrass Science
• /
• v.12 no.4
• /
• pp.195-202
• /
• 1998

The development of a protocol for high efficiency of embryogenic callus separation, maintenance and plant regeneration from the seeds of zoysiagrass cv. Zenith was studied. Embryogenic callus ratio is absolutely determined by genotype, but by adding high concentration of copper into medium, changing light condition and maintaining callus on initial induction medium for 8∼10 weeks, embryogenic callus can be easily distinguished and its growth can be promoted. There were significant differences among selected callus lines (each from one seed) according to their growth rates and regeneration percentages. Callus pre-treatment with activated charcoal inhibited callus growth, increased the level of precocious germination during culture and promoted shoot cluster formation after transfer to regeneration medium. For long-term callus maintenance, N6AA medium was better than MS medium, because the former inhibited non-embryogenic callus formation and kept vigor of embryogenic callus. The best callus lines Z-(5) has been successfully used for transformation and somaclonal variation selection in our laboratory.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.882-884
• /
• 2005

A new rectangular shape microlens array having high sag for solid-state lighting is presented. Proposed microlens, which has high sag, over $375{\mu}m$ and large diameter, over 3 mm can enormously enhance output optical extraction efficiency. Rectangular shape of microlens can maximize the fill factor of light-emitting-diode (LED) package and minimize the optical loss at the same time. This wafer level microlens array is fabricated on LED package. It has many advantages in optical properties, low cost, high aligning accuracy, and mass production.

• Molecular & Cellular Toxicology
• /
• v.3 no.2
• /
• pp.132-136
• /
• 2007

Zinc is essential metal and plays a role in a wide variety of physiological and biochemical processes. Prostate gland contains high level of zinc, generally 3-10 folds higher than other organs. Prostatic zinc uptake is resulted from the existence of zinc transporter (ZnT) protein families in membrane. In this study, we investigated the difference of zinc uptake efficiency of zinc-aspartate complex (Zn-Asp) into various organs compared with $ZnSO_4$. We observed that Plasma zinc concentration in both $ZnSO_4$ and Zn-Asp administrated group was increased progressively following administration, and reached a peak level at 2 hr. The increasing pattern of zinc concentration was similar to each groups, however the zinc concentration of Zn-Asp administrated group was higher than that of $ZnSO_4$ administrated group. We found that prostatic zinc level of Zn-Asp administrated group was higher than $ZnSO_4$ administrated group, and was increased approximately $\sim$2.7 fold and $\sim$4.2 fold at 4 and 8 hr after administration. From these observations, we suggest than Zn-Asp has high uptake efficiency of zinc into the prostate gland. Therefore, Zn-Asp is potentially useful treatment of many prostatic diseases.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.1
• /
• pp.7-16
• /
• 1989

To determine the effect of sodium plus potassium to chloride ratio and lysine level on blood pH, blood acid-base parameters, lysine-arginine antagonism and growth performance, four hundred and thirty two chicks of 3 days age were used in a completely randomized $3{\times}3$ factorial experiment. Variables contained three levels of lysine (0.8, 1.2 and 1.6%) and dietary electrolyte (100, 200 and 300 mEq/kg). Birds fed 200 mEq/kg and electrolyte had the best growth rate and feed efficiency, followed by those fed 300 mEq/kg and 100 mEq/kg electrolyte. It is proposed that high levels of dietary electrolyte may improve the growth of chicks fed diets containing excess lysine by increasing lysine catabolism. High or low levels of lysine and dietary electrolyte resulted in higher mortality than those of optimum level (1.2%) of lysine and 200 mEq/kg of electrolyte balance. When the electrolyte level was increased, the pH, $pCO_2$, base excess, $HCO_3{^-}$ and total $CO_2$ of blood plasma were increased. The utilization of nutrients was changed when the electrolyte and lysine were manipulated. Plasma chloride tended to be greater in chicks receiving high chloride diet and was the highest in chicks fed the high lysine diet. Plasma sodium and potassium were unaffected by dietary lysine. Diet containing high lysine decreased the level of arginine and excess dietary electrolyte increased arginine level in plasma. It may be concluded that cation supplementation tended to alleviate the lysine-arginine antagonism but chloride exacerbated. Tibia bone length and ash contents were significantly affected by electrolyte balance and lysine level.

• Journal of Information Processing Systems
• /
• v.16 no.6
• /
• pp.1293-1308
• /
• 2020

In fine-tuning-based transfer learning, the size of the dataset may affect learning accuracy. When a dataset scale is small, fine-tuning-based transfer-learning methods use high computing costs, similar to a large-scale dataset. We propose a mid-level feature extractor that retrains only the mid-level convolutional layers, resulting in increased efficiency and reduced computing costs. This mid-level feature extractor is likely to provide an effective alternative in training a small-scale medical image dataset. The performance of the mid-level feature extractor is compared with the performance of low- and high-level feature extractors, as well as the fine-tuning method. First, the mid-level feature extractor takes a shorter time to converge than other methods do. Second, it shows good accuracy in validation loss evaluation. Third, it obtains an area under the ROC curve (AUC) of 0.87 in an untrained test dataset that is very different from the training dataset. Fourth, it extracts more clear feature maps about shape and part of the chest in the X-ray than fine-tuning method.