• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.60-66
• /
• 2006

Notable are the burning rate characteristics of solid propellant burning at extremely high pressure(10000-20000 psia). The burning rate test using closed bomb shows the discontinuous increment around 4000 psia so that the exponent of burning rate(n) is almost double, from 0.4 to 0.8. The pressure-increasing rate of the test motor is about 300 times as high as that of the motor operating at the conventional pressure, less than 2000 psia, is, therefor the burning rate is augmented about 5-50 times. The performance prediction reflecting the pressure-change-rate effect are fairly comparable with the test data at various test conditions.

• KDI Journal of Economic Policy
• /
• v.44 no.3
• /
• pp.1-26
• /
• 2022

This paper analyzes the effects of the cut in the legal maximum interest rate (from 27.4% to 24%) that occurred in February of 2018 on loan interest rates, the default rates, and the loan approval rate of borrowers in the non-banking sector. We use the difference-in-difference identification strategy to estimate the effect of the cut in the legal maximum interest rate using micro-level data from a major credit-rating company. The legal maximum rate cut significantly lowers the loan interest rate and default rate of low-credit borrowers (i.e., high-credit-risk borrowers) in the non-banking sector. However, this effect is limited to borrowers who have not been excluded from the market despite the legal maximum interest rate cut. The loan approval rate of low-credit borrowers decreased significantly after the legal maximum interest rate cut. Meanwhile, the loan approval rate of high-credit and medium-credit (i.e., low credit risk and medium credit risk) borrowers increased. This implies that financial institutions in the non-banking sector should reduce the loan supply to low-credit borrowers who are no longer profitable while increasing the loan supply to high- and medium-credit borrowers.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.3
• /
• pp.19-22
• /
• 2017

Purpose - To control exorbitant interest rates, implementation of an interest rate ceiling is a standard practice in microfinance. However, there are pros and cons of such market intervention. Hence, the aim of this short note is to highlight issues and challenges regarding the interest rate cap in microfinance, both from the perspective of clients and institutions. Research design, data, and methodology - While the nature of this short note is explanatory and descriptive, the research methodology used relevant data from the MixMarket and Microcredit Regulatory Authority (MRA) annual reports in Bangladesh. Results - We argue that an interest rate ceiling is detrimental both for the clients and microfinance institutions (MFIs). This market intervention substantially reduces the outreach of MFIs and clients are most likely to pay a higher price in the long-run. Additionally, an interest rate cap also puts severe pressure on new-born and high-cost MFIs to cope with the interest rate ceiling. Conclusions - Although market intervention may be necessary in the short-run, it should not be the ultimate solution to abate high interest in microfinance. Understanding the operational dynamics of MFIs, as well as promoting productivity, efficiency and competition could help to lower the interest rates.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.271-278
• /
• 2009

A new modulation scheme called multicoded-pulse position modulation (MC-PPM) is proposed for an ultrawideband (UWB) impulse radio communication system. The multicoded signal is generated by using several orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multicoded signal is converted to pulse position which results in not only an improved data rate, but also a processing gain in reception, delivering the power-efficient benefit of PPM and guaranteeing the low pulse energy for UWB systems. We notice that the modulation of multi-level values of the multicoded signal to pulse position is more efficient in terms of achievable data rate than the modulation of transmitting data based on other PPM schemes within given bandwidth and pulse energy. Therefore, as a performance measure, we focus on the achievable data rate (link capacity) of the proposed scheme and analyze it theoretically. Through simulation, we compare the link capacity of the MC-PPM scheme and other PPM schemes, such as M -ary PPM and multiple PPM. With the fixed bandwidth and same pulse energy condition, the UWB system based on the proposed MC-PPM scheme shows good link capacity and an increased data rate as L increases, which is contrary to other PPM schemes.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.139-144
• /
• 1998

This paper describes the design of a variable rate QPSK demodulator for digital satellite TV system. This true variable-rate demodulator employs a unique architecture to realize an all digital synchronization and detection algorithm. Data-flow based design approach enabled a seamless transition from high level design optimization to physical layout. The demodulator has been integrated with Viterbi decoder, de-interleaver, and Ree-Solomon decoder to make a single chip Digital Video Broadcast (DVB) receiver. The receiver IC has been fabricated with a 0.5mm CMOS TLM process and proved fully functional in a real-world set-up.

• Journal of Communications and Networks
• /
• v.15 no.6
• /
• pp.559-568
• /
• 2013

We report on the first error-free terahertz (THz) wireless communication at 0.310 THz for data rates up to 8.2 Gbps using a 18-GHz-bandwidth GaAs/AlGaAs field-effect transistor as a detector. This result demonstrates that low-cost commercially-available plasma-wave transistors whose cut-off frequency is far below THz frequencies can be employed in THz communication. Wireless communication over 50 cm is presented at 1.4 Gbps using a uni-travelling-carrier photodiode as a source. Transistor integration is detailed, as it is essential to avoid any deleterious signals that would prevent successful communication. We observed an improvement of the bit error rate with increasing input THz power, followed by a degradation at high input power. Such a degradation appears at lower powers if the photodiode bias is smaller. Higher-data-rate communication is demonstrated using a frequency-multiplied source thanks to higher output power. Bit-error-rate measurements at data rates up to 10 Gbps are performed for different input THz powers. As expected, bit error rates degrade as data rate increases. However, degraded communication is observed at some specific data rates. This effect is probably due to deleterious cavity effects and/or impedance mismatches. Using such a system, realtime uncompressed high-definition video signal is successfully and robustly transmitted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.637-644
• /
• 2004

This paper proposed and implemented the adaptive transmission middleware for video streaming, which is able to support the adaptive transmission of video data to the fluctuating changes of network environment in the packet-based network and the properties of transmitted video data. The adaptive transmission middleware is made up SR-RTP-based transfer module and TFRC(TCP Friendly Rate Control)-based transfer-rate control module. The SR-RTP-based transfer module supports RTP-based real-time transfer of video data and packet retransmission scheme retransmitting the high-priority packets selectively in the damaged video data to reduce the error induced by the packet loss. Sharing the transmission bandwidth of network with the TCP-based data transfer, the TFRC-based transfer-rate control module controls the transfer rate of video data according to the most allowable transmission bandwidth in the network, so that the transfer rate is controlled adaptively to the fluctuating changes of transmission bandwidth. This paper, for the experiment, applied the adaptive transmission middleware to video streaming in the external Internet environment, and analyzed the effective frame transfer rate and the degree of the streaming jitter to evaluate the performance of packet-loss recovery and adaptive transfer rate control. In the external Internet environment where the packet-loss rate is high a bit, the relatively high streaming performance was showed compared with the case that didn't apply the adaptive transmission middleware.

• Asia-Pacific Journal of Business
• /
• v.13 no.1
• /
• pp.277-288
• /
• 2022

Purpose - This study analyzed the determinants of local unemployment rate in Korea using panel data from 16 metropolitan cities and provinces from 2000 to 2018. Design/methodology/approach - We use a dynamic spatial panel model that considers characteristics of the regional unemployment rate such as the common factors effect, spatial dependence, and serial correlations. Findings - The local unemployment rate is affected by the past and present values of the national unemployment rate. And it is significantly affected by the past local unemployment rate and the past neighboring unemployment rate because spatial dependence and serial correlations are clearly present. In addition, when the industrial structure diversity and labor productivity were high, the regional unemployment rate decreased, and when the education level was high, the regional unemployment rate increased. Research implications or Originality - In order to reduce regional unemployment rate, it is necessary to plan and establish regional customized industrial structure policies under the stance of diversification rather than specializing the regional industrial structure and accompany improvement of the quality of education with the number of years of education. In addition, the redistribution of labor from low labor productivity sectors to high labor productivity sectors through technology development will help to reduce the local unemployment rate.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.3
• /
• pp.221-230
• /
• 2010

A 4+12+16 amplitude phase shift keying (APSK) modulation outperforms other 32-APSK modulations in a nonlinear additive white Gaussian noise (AWGN) channel because of its intrinsic robustness against AM/AM and AM/PM distortions caused by the nonlinear characteristics of a high-power amplifier. Thus, this modulation scheme has been adopted in the digital video broadcasting-satellite2 European standard. And it has been considered for high rate transmission of telemetry data on deep space communications in consultative committee for space data systems which provides a forum for discussion of common problems in the development and operation of space data systems. In this paper, we present an improved bits-to-symbol mapping scheme with a better bit error rate for a 4+12+16 APSK signal in a nonlinear AWGN channel and propose a simple signal detection algorithm for the 4+12+16 APSK from the presented bit mapping.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1940-1943
• /
• 2002

In this paper, we presented the design and implementation of 155Mbps satellite Modem adaptively compensated against the rain attenuation. In order to compensate the rain attenuation over high-speed satellite ink, the adaptive coding schemes with variable coding rates and the pragmatic TCM that can be decoded both the QPSK and TC-8PSK using same Viterbi decoder was studied and analyzed. The pragmatic TCM with rate 213, selected to the optimal parameters for implementation, was modeled by VHDL in this paper. The key design issues are how to achieve a high data rate and how to integrated into a single ASIC chip various functions such as the different data rates, Scrambler/descrambler, Interleaver, Encoder/decoder, and BPSK/QPSK/8PSK modulator/demodulator. The implemented 155M0ps adaptive MODEM has the simplified interface circuits among the many functional blocks, and parallel processing architecture to achieve the high data rate. This 155Mbps adaptive MODEM was designed and implemented by single ASIC chip with the 0.25 $\mu\textrm{m}$ CMOS standard cell technology.