• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.261-267
• /
• 2015

To develop high-strength high-volume ground granulated blast-furnace slag (GGBFS) concrete, this study investigated the characteristics of strength development and durability of concrete with the water-to-binder ratio of 23% and the GGBFS replacement ratio of up to 65%. The results show that the compressive strength of GGBFS blended concrete is lower than that of ordinary Portland cement (OPC) concrete up to 3-day age, but the becomes higher after 7-day age. Together with strength increase, the pore structure becomes tighter, and thus the resistance to chloride ion penetration increases. Therefore, the GGBFS blended concrete has high resistance to freezing and thawing without additional air-entraining, and high resistance to carbonation despite low amount of calcium hydroxide ($Ca(OH)_2$). On the other hand, if silica fume (SF) is blended with GGBFS, the strength becomes lower than that of the concrete blended with GGBFS only, and the resistance to chloride ion penetration deceases. Therefore, it needs further studies on the reaction of SF in high-strength high-volume GGBFS concrete.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.250-253
• /
• 2000

We researched effects of growth on initial inoculum size, liquid volume, and medium feeding rate etc. Cell suspension inoculated at low cell concentrations showed a typical growth reduction, whereas root cultures showed an improvement in growth. In this paper, Hairy roots showed high growth rate at 0.4 % inoculum size and 100 mL liquid volume in 250 mL flask cultures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.216-217
• /
• 2007

In this paper we investigated the volume resistivity and AC conduction current according to the temperature and voltage. As a result, the volume resistivity comes to be small according to the measurement temperature and voltage. AC conduction current of the heat treatment specimen is increased because of the decrease of insulation.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.666-669
• /
• 1993

The space charge fields, including intermode apace charge fields in photorefractive material with two impurities are obtained for the small light intensity at large modulation depth, and their implication of high-capacity volume holographic interconnection are presented. In the following data regions the effect of intermode space charge fields are suppresed and the criteria for optimal implementation of volume holographic interconnections are satisfied.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.31-44
• /
• 2011

The applicability of network-based computing depends on the availability of the underlying network bandwidth. Such a growing gap between the capacity of the backbone network and the end users' needs results in a serious bottleneck of the access network in between. As a result, ISP incurs disadvantages in their business. If this situation is known to ISP in advance, or if ISP is able to predict traffic volume end-to-end link high-load zone, ISP and end users would be able to decrease the gap for ISP service quality. In this paper, simulation tools, such as ACE, ADM, and Flow Analysis, were used to be able to perceive traffic volume prediction and end-to-end link high-load zone. In using these simulation tools, we were able to estimate sequential transaction in real-network for e-Commerce. We also imported virtual network environment estimated network data, and create background traffic. In a virtual network environment like this, we were able to find out simulation results for traffic volume prediction and end-to-end link high-load zone according to the increase in the number of users based on virtual network environment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.85-86
• /
• 2002

For rheology investigation of lubricating oils, first phase diagrams were made from determined free volume based on density measurements and the temperature-pressure relation was estimated using the expansion coefficient of free volume and the temperature-pressure relation of the viscoelastic transition point. Next, the authors proposed the density-pressure-temperature relation and the viscosity-pressure-temperature relation of the tested oils based on the free volume and the phase diagrams. Moreover, it was shown that the Ehrenfest equation or the gradient of the phase diagram is closely related to the expansion coefficient of free volume.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.212-216
• /
• 2000

Combustion phenomenon in scale-downed combustor is investigated. As the combustor volume decreases surface to volume ratio increases. for increased surface to volume ratio means increased heat loss and this increased heat loss affects reaction in combustion chamber. Plastic mini combustor is made. Stoichiometricaly premixed Hydrogen I air gas is used as fuel. Initial chamber pressure and chamber size are varied and the effects are evaluated. Peak pressure decreases with the decrease in chamber height. As initial chamber pressure decreases peak pressure decreases. And this change is more important than scale down effect till the chamber height of 1mm. With this result and further information following the experiments design parameter for micro engine can be established.

• Journal of computational fluids engineering
• /
• v.20 no.1
• /
• pp.57-64
• /
• 2015

This paper describes a volume of fluid(VOF) method, mRHRIC for the simulation of free surface flows around ship hulls and provides its validation against benchmark test cases. The VOF method is developed on the basis of RHRIC method developed by Park et al. that uses high resolution differencing schemes to algebraically preserve both the sharpness of interface and the boundedness of volume fraction. A finite volume method is used to solve the governing equations, while the realizable ${\kappa}-{\varepsilon}$ model is used for turbulence closure. The present numerical results of the resistance performance tests for DTMB5415 and KCS hull forms show a good agreement with available experimental data and those of other free surface methods.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.393-399
• /
• 1997

Single-phase and three-phase AC to DC power converters are becoming frequently used for high voltage/high power applications such as telecommunications. They often require input/output transformer isolation for safety, a unity input power factor for minimum reactive power, free input harmonic currents fed back to the AC Power distribution system and, finally, high efficiency and high power density for minimum weight and volume. The proposed boost converter for power factor correction (PFC) provides an unity input power factor, low harmonic distortion and high efficiency along with reduced volume and weight. Single-phase 220VAC input/380VDC 1KW output prototype is constructed and experimental results will be verified with those of PSpice simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.8
• /
• pp.1132-1140
• /
• 1998

The disintegration process of initial spray from high-pressure swirl injector was investigated at different injection pressures. The transient breakup phenomena that were difficult to observe at high injection pressure were easily observed at the low injection pressure of 0.4MPa. The effect of fuel remained inside a nozzle hole volume on the penetration of initial spray was also investigated. The disintegration process of initial spray could be classified four regions: the formation of mushroom shape, the first collision, the second collision, and the development of spray, The liquid film of cup shape was particularly found in the second collision region, and the growth ratio of its length and width at low and high injection pressures were compared.