• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 International Symposium
• /
• pp.93-100
• /
• 2003

The continuing scaling trend in microelectronic circuit technology has a significant impact on the different IC interconnection and packaging technologies. These latter technologies have not kept pace with the IC scaling trends, resulting in a so-called“interconnect technology gap”. Multilayer thin film technology is proposed as a“bridge”- technology between the very high density IC technology and the coarse standard PCB technology. It is also a key enabling technology for the realisation of true“System-in-a-Package”(SIP) solutions, combining multiple“System-on-a-Chip”(SOC) IC's with other components and also integrating passive components in its layers. A further step is to use this technology to realise new functionalities on top of active wafers. These additional“above-IC”processed layers may e.g. be used for low loss, high speed on chip interconnects, clock distribution circuits, efficient power/ground distribution and to realize high Q inductors on chip.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3085-3094
• /
• 2022

The design concept of a Small High-flux Multipurpose LBE(Lead Bismuth Eutectic) cooled Fast Reactor (SHMLFR) was proposed in the paper. The primary cooling system of the reactor is forced circulation, and the fuel element form is arc-plate loaded high enrichment MOX fuel. The core is cylindrical with a flux trap set in the center of the core, which can be used as an irradiation channel. According to the requirements of the core physical design, a series of physical design criteria and constraints were given, and the steady and transient parameters of the reactor were calculated and analyzed. Regarding the thermal and hydraulic phenomena of the reactor, a simplified model was used to conduct a preliminary analysis of the fuel plates at special positions, and the temperature field distribution of the fuel plate with the highest power density under different coolant flow rates was simulated. The results show that the various parameters of SHMLFR meet the requirements and design criteria of the physical design of the core and the thermal design of the reactor. This implies that the conceptual design of SHMLFR is feasible.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.40-51
• /
• 1999

This paper reviews the combat survivability and supermaneuverbility which are principal factors in current and future high performance combat aircraft design. First of all, the fighter agility evaluation factors were presented. And then, emphasis was put on technologies associated with supermaneuverbility, such as vortex lift, high angle of attack aerodynamics, thrust vectoring and control system technologies that integrate each technology. The advanced nations' supermaneuverbility R/D programs were introduced as well.

• 보존과학회지
• /
• 제34권4호
• /
• pp.283-293
• /
• 2018

This study involved a comparative analysis of the correlation between meteorological elements and the concentration of airborne fungi(CFU) in relation to biological damage to two temples on piedmonts, which is a cultural heritage building. The work compared Beopjusa temple in Boeun(Chungcheongbuk-do Province) and Seonamsa temple in Suncheon(Jeollanam-do Province). Twelve meteorological elements and the CFU were measured and the Pearson correlation analysis was used to determine the degree of the relationship between them. The results showed that Beopjusa temple had high wind speed, high total horizontal radiation, high evaporation, and large number of days with precipitation. Seonamsa temple had high air temperature, high relative humidity, high dew point temperature, high sea level pressure, high precipitation, and high CFU. The CFU at Beopjusa temple did not have a linear correlation with meteorological elements, but at Seonamsa temple it was highly positive correlated with the number of days with precipitation, relative humidity, and precipitation, and was highly negative correlated with total horizontal radiation. In addition, Beopju and Seonamsa temple had a common linear relationship between factors not affected by the topographical conditions, and had a individual linear correlation between factors affected by the topographical conditions.

• ETRI Journal
• /
• 제39권1호
• /
• pp.51-61
• /
• 2017

This paper demonstrates a systematic approach for the design of broadband, high efficiency, high power, Class-AB RF amplifiers with high gain flatness. It is usually difficult to simultaneously achieve a high gain flatness and high efficiency in a broadband RF power amplifier, especially in a high power design. As a result, the use of a computer-aided simulation is most often the best way to achieve these goals; however, an appropriate initial value and a systematic approach are necessary for the simulation results to rapidly converge. These objectives can be accomplished with a minimum of trial and error through the following techniques. First, signal gain variations are reduced over a wide bandwidth using a proper pre-matching network. Then, the source and load impedances are satisfactorily obtained from small-signal and load-pull simulations, respectively. Finally, two high-order Chebyshev low-pass filters are employed to provide optimum input and output impedance matching networks over a bandwidth of 100 MHz-500 MHz. By using an EM simulation for the substrate, the simulation results were observed to be in close agreement with the measured results.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.219-227
• /
• 2010

Telecom supplies need to conform to low Total Harmonic Distortion (THD) and high Power Factor (PF) as per IEC 61000-3-2 and IEEE 519-1992 standards. These high rating power supplies use a three phase utility in which low THD and high PF are realized via various passive and active wave shaping schemes. In this paper, a new design for three phase telecom power supplies is presented with circuit parameter values optimized for high performance in terms of a low THD, high PF, low ripple and high line and load regulation using a suitable combination of various strategies. The performance of the power supply is validated by extensive simulations.

• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.5-8
• /
• 1998

Flat belt(FB) type high pressure apparatus has been succesfully utilized in various high pressure experimental stations in Korea and Japan to conduct HPHT (high pressure and high temperature) diamond synthesis. Present paper discusses pressure calibration of FB apparatus at high temperature to establish P-T condition of diamond synthesis. We also present some examples of controling P-T condition through careful experimental set-up of the high pressure sample cells. Finally we discuss reproducibility of pressure and temperature condition of the HPHT diamond synthesis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1828-1830
• /
• 1996

In this study, We developed the optical fiber incorporated high-voltage underground power cable which is combined optical fibers with conventional high-voltage underground power cable. Optical-Unit that optical fiber is inserted in stainless tube is tested, and we got good results enough to safe optical fibers. Also we put the optical fiber incorporated high-voltage underground power cable to the test of electrical characteristics and optical characteristics, we knew that the electrical characteristics were the same characteristics as conventional high-voltage underground power cable and the transmission loss change was almost zero.

• Journal of Veterinary Science
• /
• 제21권1호
• /
• pp.13.1-13.14
• /
• 2020

Currently, the systems for culturing buffalo spermatogonial stem cells (SSCs) in vitro are varied, and their effects are still inconclusive. In this study, we compared the effects of culture systems with undefined (foetal bovine serum) and defined (KnockOut Serum Replacement) materials on the in vitro culture of buffalo SSC-like cells. Significantly more DDX4- and UCHL1-positive cells (cultured for 2 days at passage 2) were observed in the defined materials culture system than in the undefined materials system (p < 0.01), and these cells were maintained for a longer period than those in the culture system with undefined materials (10 days vs. 6 days). Furthermore, NANOS2 (p < 0.05), DDX4 (p < 0.01) and UCHL1 (p < 0.05) were expressed at significantly higher levels in the culture system with defined materials than in that with undefined materials. Induction with retinoic acid was used to verify that the cultured cells maintained SSC characteristics, revealing an SCP3+ subset in the cells cultured in the defined materials system. The expression levels of Stra8 (p < 0.05) and Rec8 (p < 0.01) were significantly increased, and the expression levels of ZBTB16 (p < 0.01) and DDX4 (p < 0.05) were significantly decreased. These findings provided a clearer research platform for exploring the mechanism of buffalo SSCs in vitro.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.271-277
• /
• 2014

To overcome the limitations of the solid oxide fuel cells (SOFCs) due to the high temperature operation, there has been increasing interest in proton conducting fuel cells (PCFCs) for reduction of the operating temperature to the intermediate temperature range. In present work, the perovskite $BaCe_{0.85-x}Zr_xY_{0.15}O_{3-\delta}$ (BCZY, x = 0.1, 0.3, 0.5, and 0.7) were synthesized via solid state reaction (SSR) and adopted as an electrolyte materials for PCFCs. Powder characteristics were examined using X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Brunauer, Emmett and Teller (BET) surface area analysis. Single phase BCZY were obtained in all compositions, and chemical stability was improved with increasing Zr content. Anode-supported cell with $Ni-BaCe_{0.55}Z_{0.3}Y_{0.15}O_{3-\delta}$ (BCZY3) anode, BCZY3 electrolyte and BCZY3-$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-\delta}$ (BSCF) composite cathode was fabricated and electrochemically characterized. Open-circuit voltage (OCV) was 1.05 V, and peak power density of 370 ($mW/cm^2$) was achieved at $650^{\circ}C$.