• 제목/요약/키워드: High Tc superconductor

검색결과 151건 처리시간 0.028초

초전도베어링을 이용한 플라이훨 로터의 동특성 (Dynamic Behavior of a Flywheel Rotor System Using Superconductor Bearings)

  • 김영철;최상규;이준성;한영희;성태현
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1071-1077
    • /
    • 2000
  • Recently, several attempts have been made to apply high Tc superconductor bearings of thrust type to flywheel energy storage system (FESS) throughout the world. Radial type superconductor bearings, however, have never been tried to the real FESS. KEPRI has developed its own radial type bearings and is now currently applying them to a FESS designed by KIMM, for the first time. In this paper preliminary test results of bearing performance and dynamic behavior of the flywheel rotor system mounted on them are presented. The dynamic properties, i.e, stiffness and damping, of the superconductor bearings were experimentally estimated using the static loading test as well as the impact test. The test revealed that stiffness value of the present superconductor bearings is about 67,700N/m and the damping value 29Ns/m. It was also found out that these bearings have some levitation drift problems due to excessive vibrations encountered while passing through the critical speeds. With recommend backup bearings to limit the vibration amplitudes of the rotor it is predicted that the flywheel rotor will show stable operations in the design speed range.

  • PDF

고온 초전도체를 위한 Ru/Ni 기판의 제조와 특성 분석 (Fabrication and Characterization of Ru/Ni Substrates for Superconductor Applications)

  • Kwangsoo No;Huyong Tian;Inki Hong;Hyunsuk Hwang;Tae-Hyun Sung
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.13-16
    • /
    • 2002
  • Ru thin films were deposited on bi-axially textured Ni tape using rf-magnetron sputtering for a conductive buffer layer of high Tc superconductor applications. (002) textured Ni films were fabricated as the deposition temperature was over $600^{\circ}C$. Rocking curves of the films showed similar alignment to those the Ni tapes. The resistivity of the tapes fabricated below $600^{\circ}C$ was around 20$\mu\Omega$-cm which is good for the conductive layer for tape superconductor applications.

  • PDF

Rietveld 해석법에의한 YBCO 초전도체의 결정 구조 전이 연구 (The crystal structure transition in YBCO superconductor by Rietveld analysis Method)

  • 채기병;전용우;소대화
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 춘계학술대회 논문집
    • /
    • pp.239-243
    • /
    • 1996
  • In this paper, we have tried to focus on the optimum conditions of crystal structure parameters on YBCO high Tc oxide-superconductor as an excel lent electronic parts. When we verify the characteristic improvement of superconductance and accurate reproduction and so forth, we have made use of RIETAN. We have varied the lattice constant with oxygen content from 6.0 to 7.0 as for transition of orthogonal structure and tetragonal structure for the superconductor. As the result of above, we have preyed that transition from orthogonal structure to tetragonal structure is made at the point of 6.6(oxygen content) by using the simulation.

  • PDF

플라즈마 용사에 의한 BSCCO 초전도체 형성을 위한 용사 분말의 제조에 관한 연구 (A Study on Manufacture of Spraying Powder for BSCCO Superconductor Formation by Plasma Spray)

  • 박정식;조창은;박경채
    • 한국분말재료학회지
    • /
    • 제15권6호
    • /
    • pp.477-481
    • /
    • 2008
  • Formation and characteristics of spraying powder for BSCCO High-Tc superconductor prepared by plasma spray coating were investigated. The addition of 3% of binder gives the best flowability of the powder. Ball milling for 30h and 35h gives the best flowability of powder in the case of 2001 and 0212, respectively. The withdraw ratio increases upon binder addition from 12 to 27% in the case of 2001 and from 18 to 31% in the case of 0212 for sieving powder of $30-90{\mu}m$ in size. The built-up efficiency for $100{\mu}m$ thickness of spray coating is increased more than 30% by binder addition. The microstructure of the spray coated layers was investigated by XRD and EDS analysis.

벌크형 고온 초전도 합성 (Fabrication of Bulk High-Tc Superconductor)

  • 이상헌
    • 한국전기전자재료학회논문지
    • /
    • 제34권5호
    • /
    • pp.333-336
    • /
    • 2021
  • Oxide YBCO bulk superconductors are manufactured using the melt process. Because seed crystal growth method utilizes a slow-spreading layer-by-layer reaction, a long-term heat treatment is required to manufacture a single-crystal specimen of several cm. In this study, the melt process method was applied to compensate for the shortcomings of the seed crystal growth method. The thickness of the upper and lower pellets of the YBCO bulk was molded to 40 mm, and YBCO superconductor was produced by heat treatment. The measurement results of capture magnetism was in line with the literature. This results in a relationship that the higher the growth of Y211 particle in the YBCO, the higher the superconducting properties. We analyzed the YBCO superconductor, focusing on the Y2BaCuO5 particle distribution.

유기금속염을 이용한 고효율 전력 전송용 초전도 전구체 합성 (Synthesis of high functional Superconducting Precursor using Organic metal salts method for Electric power transmission)

  • 이상헌
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.270-271
    • /
    • 2005
  • A high Tc superconducting with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_Y$ was prepared by the citarte method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h, the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factro in determining whether it is easy to form the high Tc phase or not. because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

  • PDF

열처리 조건에 따른 Bi계 초전도체에서 상 생성 과정에 대한 연구 (A Study on the Phase Formation Process in Bi-system Superconductor with Heat Treatment Conditions)

  • 정진인;이준웅;박용필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.221-223
    • /
    • 1999
  • In this work, samples were manufactured variously by changing conventional calcining and sintering conditions and we tried the utilization by making the heat treatment time, which is demanded to high-Tc phase formation, much shorter. We found out optimal heat treatment conditions with the analysis on formation process at superconducting phase in term of the change of calcining and sintering time and then, examined X-ray diffraction(XRD) patterns, scanning electron microscope(SEM) measurement and energy dispersive X-ray spectrometer(EDX) of the samples manufactured under heat treatment conditions which we suggest here. As a result, 2223 high-$T_c$, phase of (Bi,Pb)SrCaCuO superconductor starting with ($Bi_l$ xPbx,)$_2$$Sr_2$$Ca_2$$Cu_3$$O_y$, composition was formed from 1 hr sintering sample at temperature nearby melting point and also the completed sample with calcining and sintering time of 9 hr was formed high-$T_c$.low-$T_c$ phase appearing in sight above the critical temperature of liquid $N_2$.

  • PDF