DOI QR코드

DOI QR Code

A Study on Manufacture of Spraying Powder for BSCCO Superconductor Formation by Plasma Spray

플라즈마 용사에 의한 BSCCO 초전도체 형성을 위한 용사 분말의 제조에 관한 연구

  • Park, Jeong-Sik (Dept. of Ophthalmic Optics, Daegu Health College) ;
  • Cho, Chang-Eun (Dept. of Materials Science and Metallurgical Engineering, Kyungpook National University) ;
  • Park, Kyung-Chae (Dept. of Materials Science and Metallurgical Engineering, Kyungpook National University)
  • 박정식 (대구보건대학 안경광학과) ;
  • 조창은 (경북대학교 금속신소재공학과) ;
  • 박경채 (경북대학교 금속신소재공학과)
  • Published : 2008.12.28

Abstract

Formation and characteristics of spraying powder for BSCCO High-Tc superconductor prepared by plasma spray coating were investigated. The addition of 3% of binder gives the best flowability of the powder. Ball milling for 30h and 35h gives the best flowability of powder in the case of 2001 and 0212, respectively. The withdraw ratio increases upon binder addition from 12 to 27% in the case of 2001 and from 18 to 31% in the case of 0212 for sieving powder of $30-90{\mu}m$ in size. The built-up efficiency for $100{\mu}m$ thickness of spray coating is increased more than 30% by binder addition. The microstructure of the spray coated layers was investigated by XRD and EDS analysis.

Keywords

References

  1. S. O. Kasap: Principles of Electronic Materials and Devices, (2002)
  2. H. Maeda, T. Tanaka, M. Fukutomi, and T. Asano: Jpn. Appl. Phys., 27 (1988) 209 https://doi.org/10.1143/JJAP.27.209
  3. C. Manfredotti, M. Truccato, P. Volpe, P. Benzi, N. Rizzo, S. Sanguinnetti, and D. Allasia: Physica C, 303 (1998) 94 https://doi.org/10.1016/S0921-4534(98)00241-X
  4. N. Merchant, J.S. Luo S.N. Maroni, G.N. Riley, and W. L. Carter: Appl. Supercond., 2 (1994) 217 https://doi.org/10.1016/0964-1807(94)90008-6
  5. M. Mansori, P. Satre, M. Roubin, G. Vacquier, P. Strobel, and A. Sebaoun: Physica C, 235 (1994) 331 https://doi.org/10.1016/0921-4534(94)91389-7
  6. Y. Yamada, B. Obst, and R. Flukiger: Supercond. Sci. Technol., 4 (1991) 165 https://doi.org/10.1088/0953-2048/4/4/007
  7. J. Joo, J. P. Singh, T. Warzynski, A. Grow, and R.B. Poeppel: Appl. Supercond., 2 (1994) 401 https://doi.org/10.1016/0964-1807(94)90087-6
  8. K. Tachakawa, T. Watanabe, T. Inoue, and K. Shirasu: Jpn. Appl. Phys., 30 (1991) 639 https://doi.org/10.1143/JJAP.30.639
  9. K. Tachakawa, T. Inoue K. Zama, and Y. Hikichi: Supercond. & Technol., 5 (1992) 386 https://doi.org/10.1088/0953-2048/5/6/012
  10. Y. Yamada, F. Yamashita, K. Wada, and K. Tachikawa: J. Japan Inst. Metals, 61 (1997) 836 https://doi.org/10.2320/jinstmet1952.61.9_836
  11. T. Bernecki: Thermal Spray Technology. ASM Intern., (1992) 186