• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.213-218
• /
• 2008

This paper describes hardware-based high speed multimedia data reassembly processor for remote multimedia Set-Top-Box(MSTB) of interactive satellite multimedia communication system. The conventional multimedia data reassembly scheme is based on software processing of MSTB. As increasing of transmission rate for multimedia data services, the CPU load of remote MSTB is increased and reassembly performance of MSTB is limited. To provide high speed multimedia data service to end user, we proposed hardware based high speed multimedia data reassembly processor. It is implemented by using an FPGA, a PCI interface chip, and RAMs. And it is integrated in MSTB and tested. It has been confirmed to meet required all functions and processing rate up to 116Mbps.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.256-264
• /
• 2010

In this paper, a digital controller of magnetic bearing system for a high vacuum turbomolecular pump (TMP) is designed and examined. For stabilizing and providing damping in magnetic bearing, the digital PID controller is applied for each 5 control axes, and the inter-axis cross feedback controller is also applied to suppress low frequency vibration caused by gyroscopic moment of the rotor at high speed of rotation. The fabricated rotor-shaft has its first flexible natural frequency lower than maximum speed, about 614Hz, so the two lead filters are applied to increase damping of flexible mode. Notch filters with rotating frequency were selected to reduce vibration of the pump housing caused by unbalance load. The implemented controllers are verified by examination of frequency response and rotating test up to 40,000 rpm, which is higher than critical speed of backward flexible mode.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_2
• /
• pp.443-451
• /
• 2021

It is essential to examine and analyze the power output and load responses together using real-world turbulent wind speeds. In this paper, the power controller and the drive train damper are simultaneously considered using the NREL 5MW wind turbine model, and the damage equivalent load(DEL) of the low speed shaft torque and power output responses according to the natural frequency of the second order low pass filter are simultaneously investigated. Numerical testing is carried out above rated wind speed using commercially available Bladed software. From the viewpoints of DEL reduction of the drive train shaft torque and power output responses, it is shown that the natural frequency of the low pass filter is appropriately about 6 to 10rad/s. And the reduction ratio of the DEL of the low-speed shaft torque decreases as the wind speed becomes higher, and it is confirmed that the reduction ratio is limited to about 20% at high wind speeds.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.3
• /
• pp.221-232
• /
• 2017

In this study, bipolar plates in fuel cells are formed using rubber forming process. The effects of important parameters in rubber forming such as hardness and thickness of rubber pad, speed and pressure of punch that compress blank, and physical property of materials on the channel depth were analyzed. In the soft material sheet Al1050, deeper channels are formed than in materials STS304 and Ti-G5. Formed channel depth was increased when hardness of rubber pad was lower, thickness of rubber pad was high, and speed and pressure of punch were high. It was found the deepest channel was achieved when forming process condition was set with punch speed and pressure at 30 mm/s and 55 MPa, respectively using rubber pad having hardness Shore A 20 and thickness 60 mm. The channel depths of bipolar plates formed with Al1050, STS304 and Ti-G5 under the above process condition were 0.453, 0.307, and 0.270 mm, respectively. There were no defects such as wrinkle, distortion, and crack found from formed bipolar plates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2355-2364
• /
• 1998

In conventional fractal decoding procedure, the reconstructed image is obtained by a rpredefined number of iterations starting with an arbitrary initial image. Its convergence speed depends on the selection of the initial image. It should be solved to get high speed convergence. In this paper, we theoretically reveal that conventional method is approximately decomposed into the decoding of the DC and AC components. Based on this fact, we proposed a novel fast fractal decoding algorithm made up of two steps. The averaged-image considered as an optimal initial image is estimated in the first step. In the second step, the reconstructe dimag eis genrated from the output image obtained in the first step. From the simulations, it is shown that the output image of the first step approximately converges to the averaged-image with only 15% calculations for one iteration of conventional method. And the proposed method is faster than various decoding mehtods and evenly equal to conventioanl decoding with the averaged-image. In addition, the proposed method can be applied to the compressed data resulted from the various encoding methods because it does not impose any constraints in the encoding procedure to get high decoding speed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.325-332
• /
• 2004

In this paper, we propose a new DSSS-QPSK baseband modem receiver structure. A general receiver consists of matched filter, do-spreader, and DLL(Delay Locked Loop). In this paper, the matched filter plays a role of the do-spreader using the structure similarities between the matched filter and the de-spreader. As a result of the new receiver architecture, we can reduce the computational expenses and get the simpler receiver structure. This result can be used as an important part in designing the high speed modem. And, through the computer simulation and the experiment with the proposed architecture, we show that the proposed receiver structure yields fast operation speed and simple overall architecture.

• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.41-51
• /
• 2017

The explosive increase in the range of Internet usage gradually makes the speed and capacity of network high-speed, rapidly evolving it into mass storage. Accordingly, network equipment such as switch and router are coping with it through hardware-based rapid technological evolution, but as the technological development of the most basic and essential network security system in the hyper-connected society requires frequent alterations and updates about the security issues and signatures of tens of thousands, so it is not easy to overcome the technical limitations based on the software. In this paper, to improve problems in installing and operating such anti-DDoS devices, we propose a Hi-DPI algorithm best reflecting the hardware characteristics and parallel processing characteristics of FPGA (Field Programmable Gate Array), and would verify the practicality.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.265-272
• /
• 2010

To supply a power distribution network with stable power in a high-speed mixed mode system, simultaneous switching noise caused at the multilayer PCB and package structures needs to be sufficiently suppressed. The uni-planar compact electromagnetic bandgap (UC-EBG) structure is well known as a promising solution to suppress the power noise and isolate noise-sensitive analog/RF circuits from a noisy digital circuit. However, a typical UC-EBG structure has several severe problems, such as a limitation in the stop band's lower cutoff frequency and signal quality degradation. To make up for the defects of a conventional EBG structure, a partially located EBG structure with decoupling capacitors is proposed in this paper as a means of both suppressing the power noise propagation and minimizing the effects of the perforated reference plane on the signal quality. The proposed structure is validated and investigated through simulation and measurement in both frequency and time domains.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.637-658
• /
• 2015

The development of multimedia applications has followed the development of high-speed networks. By improving the performance of mobile devices, it is possible to provide high-transfer-speed broadband and seamless mobile multicasting services between indoor and outdoor environments. Multicasting services support efficient group communications. However, mobile multicasting services have two constraints: tunnel convergence and handoff latency. In order to solve these problems, many protocols and handoff methods have been studied. In this paper, we propose inter local mobility anchor (inter-LMA) optimized handoff model for mobile multicasting services in proxy mobility IPv6 based (PMIPv6-based) networks. The proposed model removes the tunnel convergence issue and reduces the router processing costs. Further, it the proposed model allows for the execution of fast handoff operations with adaptive transmission mechanisms. In addition, the proposed scheme exhibits low packet delivery costs and handoff latency in comparison with existing schemes and ensures fast handoff when moving the inter-LMA domain.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.63-66
• /
• 1999

Echo and near-end crosstalk(NEXT) can be generated in two-wire duplex transmission. In this paper investigates how to cancel echoes of high speed communication. A pipeline algorithm is used to remove the echoes that high speed communication. It is least mean squared(LMS) algorithm based on the relaxed look-ahead concept, is focused on the pipelined LMS, and its performance is compared to that of the serial LMS algorithm. And we design pipelined adaptive filtering. In advanced of the hardware implementation with VHDL code the performance of pipelined LMS algorithm is verified by the computer simulation.